Introduction
Thank you for choosing the BLACK+DECKER 200 Lumen LED Neck Reading Light. This versatile lighting tool is designed for hands-free illumination in various environments, from home repairs to outdoor activities. Its flexible gooseneck, detachable magnetic lights, and multiple dimmable modes provide adaptable lighting solutions. Please read this manual thoroughly before use to ensure proper operation and maintenance.
Safety Information
- Battery Safety: Use only AA alkaline batteries. Do not mix old and new batteries, or different types of batteries. Ensure correct polarity (+/-) when inserting batteries. Remove batteries if the device will not be used for an extended period to prevent leakage.
- Eye Protection: Do not stare directly into the LED lights, as this may cause temporary vision impairment.
- Heat: The LED lights may become warm during prolonged use. This is normal.
- Water Resistance: The product is rated IP65 for weather resistance, meaning it is protected against dust and low-pressure water jets. Do not submerge the device in water.
- Children: Keep out of reach of children. This is not a toy.
Package Contents
Verify that all items are present in your package:
- 1 x Flexible Gooseneck Band
- 2 x Detachable LED Lights (100 lumens each)
- 1 x Magnetic Mount
- 2 x AA Batteries
Image: Components of the BLACK+DECKER LED Neck Reading Light, including the flexible gooseneck, two detachable lights, and the magnetic mount.
Product Features
- Dual LED Lighting: Two independent LED modules, each providing 100 lumens, for a total of 200 lumens.
- Dimmable Modes: Each light features three adjustable brightness settings (High, Medium, Low) and an SOS mode.
- Flexible Gooseneck: Bendable design allows for hands-free use around the neck or wrapped around objects.
- Magnetic Mounting: Each detachable light has built-in magnets. A heavy-duty detachable magnetic base is also included for broader mounting options.
- Weather-Resistant: IP65 rated for protection against dust and water, suitable for indoor and outdoor use.
- Battery-Powered: Operates on two AA batteries (included), providing up to 4 hours of continuous lighting.
Setup
1. Battery Installation
- Twist the black cap counter-clockwise to open the battery compartment on each detachable LED light.
- Insert one AA battery into each light, ensuring the positive (+) and negative (-) ends match the indicators inside the compartment.
- Replace the black cap by twisting it clockwise until secure.
The following video demonstrates the battery installation and basic operation:
Video: Overview of the BLACK+DECKER 200 Lumen LED Utility Light, demonstrating components, battery installation, and dimmable settings.
2. Attaching Lights to Gooseneck
- Align the magnetic base of each detachable LED light with the magnetic ends of the flexible gooseneck band.
- The lights will snap securely into place.
Operating Instructions
Power On/Off and Dimmable Settings
- Each LED light has an independent power button located on its side.
- Press the power button once to turn the light on at its highest brightness setting.
- Press the button again to cycle through the brightness modes: High > Medium > Low > SOS > Off.
- To turn off the light directly from any mode, press and hold the power button for approximately 2 seconds.
Image: The neck light in use, demonstrating hands-free illumination for detailed tasks.
Flexible Gooseneck Use
- Around the Neck: Place the gooseneck band around your neck to direct light precisely where you need it for reading, crafting, or working.
- Wrapped Around Objects: The flexible design allows you to wrap the gooseneck around poles, pipes, or beams to illuminate awkward angles and tight spaces.
Image: The flexible gooseneck adjusted to provide targeted lighting in an engine compartment.
Magnetic Mounting Options
- Individual Lights: Each detachable light has a built-in magnet. Remove a light from the gooseneck and attach it directly to any metal surface for focused illumination.
- Gooseneck with Magnetic Base: The included heavy-duty magnetic mount allows you to attach the entire gooseneck assembly to metallic objects for broader lighting coverage. Simply place the center of the gooseneck onto the magnetic mount, then attach the mount to a metal surface.
Image: The neck light assembly mounted magnetically to a metal pegboard, illustrating hands-free use.
Image: A detachable light used independently as a handheld flashlight to inspect an electrical panel.
Maintenance
- Cleaning: Wipe the light with a soft, damp cloth. Do not use abrasive cleaners or solvents.
- Battery Replacement: Replace batteries when the light output diminishes. Always replace both AA batteries at the same time.
- Storage: Store the light in a cool, dry place when not in use. Remove batteries if storing for extended periods.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | Dead or incorrectly inserted batteries. | Replace batteries with new AA batteries, ensuring correct polarity. |
| Light output is dim. | Low battery power. | Replace batteries with new AA batteries. |
| Battery drains quickly. | Possible parasitic drain or low-quality batteries. | Ensure lights are completely off when not in use. Use high-quality alkaline batteries. Remove batteries if storing for extended periods. |
| Lights detach too easily from gooseneck. | Improper attachment or excessive force. | Ensure lights are fully seated onto the magnetic ends of the gooseneck. Avoid sudden impacts or strong vibrations. |
Specifications
- Model Number: BXL3-1002-ORG
- Light Output: 200 Lumens (100 lumens per light)
- Light Source: LED
- Power Source: 2 x AA Batteries (Alkaline)
- Battery Life: Up to 4 hours (depending on brightness level)
- Water Resistance: IP65
- Material: Metal
- Product Dimensions: 7"D x 7"W x 2"H
- Item Weight: 11.2 ounces
- Special Features: Extendable, Foldable, Lightweight, Magnetic Base, Portable, Adjustable Brightness, Independent Control
Warranty and Support
For warranty information or technical support, please refer to the documentation included with your purchase or visit the official BLACK+DECKER website. Keep your proof of purchase for warranty claims.
