Muphyers DoubleDoor-10X10FT
Muphyers 10X10FT Double Door Outdoor Dog Kennel Instruction Manual
Model: DoubleDoor-10X10FT
1. Introduction
This instruction manual provides essential information for the safe and effective assembly, operation, and maintenance of your Muphyers 10X10FT Double Door Outdoor Dog Kennel. Please read this manual thoroughly before beginning assembly or use to ensure proper functionality and the safety of your pet.

Image 1.1: Overview of the Muphyers 10X10FT Double Door Outdoor Dog Kennel.

Image 1.2: The kennel provides a spacious outdoor enclosure for pets.
2. Safety Information
Observe the following safety precautions to prevent injury to persons or pets and damage to the product:
- Ensure all components are securely fastened during assembly and periodically check for tightness.
- Do not allow children to climb on or play inside the kennel unsupervised.
- Place the kennel on a level, stable surface to prevent tipping.
- Regularly inspect the kennel for any signs of wear, damage, or sharp edges that could harm your pet.
- Ensure adequate ventilation within the kennel, especially during warm weather.
3. Package Contents
Your Muphyers 10X10FT Double Door Outdoor Dog Kennel package includes all necessary panels, frame components, a roof cover, hardware (clips, screws, bolts), and basic assembly tools. Please verify all parts are present and undamaged before beginning assembly. Refer to the packing list provided with your product for a detailed inventory.
4. Setup and Assembly
Assembly of the Muphyers dog kennel utilizes a clip and screw connection method, designed for user-friendly installation. While one person can assemble it, having a helper is recommended to expedite the process and manage larger components.
4.1 Preparation
- Choose a level and stable outdoor location for the kennel.
- Unpack all components and lay them out, identifying each part according to the provided diagram.
- While basic tools are included, using your own Allen wrench, socket/ratchet set, or power tool (with caution to avoid overtightening) may improve efficiency.
4.2 Assembly Steps
- Attach the plastic end covers to the bottom of each panel.
- Begin by connecting the side panels, ensuring bolt holes are correctly oriented for roof support attachment. Assemble one side at a time.
- Loosely assemble the entire structure using the provided clips and screws. Do not fully tighten hardware at this stage.
- Install the roof supports.
- Once the main frame is assembled, gradually tighten all roof supports, working from the center outwards. Then, tighten all side panel connections.
- Secure the kennel to the ground using the provided ground fixing spikes. For added stability in windy conditions, consider using sturdier anchors (not included).
- Install the roof cover, ensuring it is securely fastened to the frame using the awnings connecting buckles.

Image 4.1: Details of key assembly components including buckles, ground spikes, and door locks.
5. Operating Instructions
The Muphyers kennel is designed for ease of use and pet security.
5.1 Double Door Access
The kennel features double doors, providing ample space for both you and your pet to enter and exit comfortably. Ensure both doors are fully open when entering or exiting to prevent obstruction.

Image 5.1: The upgraded wider double doors facilitate easy entry and exit.
5.2 Double-Lock Security System
Each door is equipped with a robust double-lock system. To secure the doors, ensure both locking mechanisms are engaged. This system is designed to prevent accidental openings and enhance pet security.
5.3 Feeder Door
A convenient small feeder door is integrated into one of the panels. This allows for easy access to provide food and water to your pet without needing to enter the main enclosure. Ensure the feeder door is securely latched after use.

Image 5.2: Details of the feeder door and the secure door locks.

Image 5.3: The feeder door allows for convenient feeding without entering the main enclosure.
6. Maintenance
Regular maintenance will extend the lifespan of your Muphyers dog kennel and ensure a safe environment for your pet.
6.1 Cleaning
- Clean the metal frame and wire mesh periodically with mild soap and water. Rinse thoroughly and allow to air dry.
- The roof cover can be wiped clean with a damp cloth.
- Remove any debris or waste from the kennel regularly to maintain hygiene.
6.2 Inspection
- Periodically check all bolts, screws, and clips to ensure they remain tight. Tighten any loose fasteners.
- Inspect the protective spray coating on the metal frame for any chips or scratches that could lead to rust. Touch up as needed with appropriate rust-resistant paint.
- Examine the wire mesh for any damage, bends, or sharp points.
- Check the roof cover for tears or damage, especially after severe weather.

Image 6.1: The roof cover provides all-weather protection for your pet.
7. Troubleshooting
If you encounter issues during assembly or use, consider the following:
- Difficulty with bolt holes: Some holes may require minor adjustment. Ensure proper alignment before attempting to force components. Do not overtighten screws.
- Hardware not fitting: Double-check that you are using the correct hardware for each step as per the assembly instructions. If screws are too short, contact customer support for replacements.
- Wobbly structure: Ensure the kennel is placed on a completely level surface. Re-check all connections and tighten any loose bolts or screws. Ground anchors should be fully secured.
- Roof cover not fitting: Ensure the frame is correctly assembled and square. The roof cover should be stretched taut and secured at all attachment points.
For further assistance, please contact Muphyers customer support.
8. Specifications
| Feature | Detail |
|---|---|
| Model | DoubleDoor-10X10FT |
| Product Dimensions (L x W x H) | 120" x 117" x 72" (10ft x 9.75ft x 6ft) |
| Material | Metal Iron frame with protective spray coating, Polyester roof cover |
| Wire Mesh Size | 3x2 inches |
| Support Pole Diameter | 2.2mm |
| Special Features | Double-Lock Security, Feeder Door, Weatherproof/UV-resistant Roof |
| Breed Recommendation | All Breed Sizes |

Image 8.1: Detailed product dimensions for the kennel.
9. Warranty and Support
For information regarding warranty coverage, product support, or replacement parts, please refer to the documentation included with your purchase or contact Muphyers customer service directly. Contact details can typically be found on the product packaging or the manufacturer's official website.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.