Rust-Oleum 393378-6PK

Rust-Oleum Stops Rust Turbo Spray Paint (Model 393378-6PK)

Satin Black Protective Enamel

1. Product Overview

The Rust-Oleum Stops Rust Turbo Spray System Spray Paint is an oil-based enamel designed for large projects, offering superior coverage and durability. This product provides rust and corrosion protection for metal, wood, concrete, and masonry surfaces. Its advanced Turbo Spray System delivers a wide fan spread for efficient application.

Key Features:

Rust-Oleum Stops Rust Turbo Spray Paint can in Satin Black

Image 1.1: Rust-Oleum Stops Rust Turbo Spray Paint, Satin Black, 24 oz can.

Comparison of standard and turbo spray patterns

Image 1.2: Illustration comparing standard spray patterns with the Turbo Spray System's wider fan pattern (up to 10 inches).

Close-up of the Turbo Tip nozzle

Image 1.3: Close-up view of the Turbo Tip, designed for a wide fan spray.

2. Safety Information

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Always read and follow all warnings and instructions on the product label.

General Safety Precautions:

3. Setup and Preparation

Surface Preparation:

  1. Ensure the surface is clean, dry, and free of loose rust, dirt, grease, oil, and old paint.
  2. For best adhesion, lightly sand glossy surfaces.
  3. Prime bare metal or heavily rusted surfaces with a Rust-Oleum Stops Rust primer for optimal rust prevention and adhesion.

Work Area Preparation:

Image showing essential preparation items: drop cloth, comfort grip, protective eyewear, sandpaper, painter's tape, lint-free cloth, and gloves.

Image 3.1: Recommended preparation and safety items for painting.

4. Operating Instructions (Application)

Before You Spray:

  1. Shake the can vigorously for one minute after the mixing ball begins to rattle. Continue to shake occasionally during use.
  2. Test spray on a scrap piece of material to check color and spray pattern.

Application Technique:

  1. Hold the can upright 10-16 inches from the surface.
  2. Press the spray button firmly and move the can back and forth in a steady motion, slightly overlapping each stroke.
  3. For best results, apply two or more light coats a few minutes apart rather than one heavy coat. This helps prevent drips and runs.
  4. The Turbo Spray System provides a wide fan pattern, allowing for faster coverage of large areas. Adjust your movement speed to achieve even coverage.
Person spraying a metal chair with Rust-Oleum Turbo Spray Paint

Image 4.1: Example of applying Rust-Oleum Turbo Spray Paint to a metal surface.

Drying and Recoating:

Painted wood and metal samples showing paint adhesion

Image 4.2: Demonstrates paint adhesion to both wood and metal surfaces.

Close-up of the spray can cap, indicating color match

Image 4.3: The spray can cap is designed to match the paint color for easy identification.

5. Maintenance and Storage

After Each Use:

Storage:

6. Troubleshooting

Common Issues and Solutions:

IssuePossible CauseSolution
Sputtering or Uneven SprayInsufficient shaking, clogged nozzle, low can pressure.Shake can vigorously for at least one minute before use and occasionally during application. Invert can and spray to clear nozzle. Ensure can is not too cold.
Drips or RunsSpraying too close to the surface, applying too heavy a coat, moving the can too slowly.Maintain a distance of 10-16 inches. Apply several light coats instead of one heavy coat. Move the can at a consistent, steady pace.
Poor CoverageSpraying too far from the surface, moving the can too quickly.Adjust spraying distance to 10-16 inches. Slow down movement slightly to ensure adequate paint deposition.
Wrinkling of PaintRecoating between 1 and 48 hours.Ensure recoating occurs within 1 hour or after 48 hours to avoid wrinkling.

7. Specifications

SpecificationDetail
BrandRust-Oleum
Model NameStops Rust Turbo Spray Paint
Model Number393378-6PK
ColorSatin Black
Finish TypeSatin
Size24 Ounce (Pack of 6)
Item Volume144 Fluid Ounces (total for 6 cans)
Paint TypeSpray, Oil-Based Enamel
Specific UsesInterior/Exterior
Surface RecommendationMetal, Wood, Concrete, Masonry
Special FeaturesChip Resistant, Fade Resistant, Fast-Drying, Rust Resistant, Scratch Resistant
Coverage24-40 square feet per can
Water Resistance LevelWater Resistant
Product Dimensions8.38 x 5.69 x 14.69 inches (package)
Item Weight11.68 pounds (package)
Comparison of traditional 12oz aerosol can and Turbo 24oz aerosol can

Image 7.1: Size comparison between a traditional 12oz aerosol can and the larger 24oz Turbo aerosol can.

Sheen Guide showing Flat, Satin, Semi-Gloss, and Gloss finishes

Image 7.2: Sheen Guide illustrating different finish types: Flat (no shine), Satin (medium shine), Semi-Gloss (medium-high shine), and Gloss (high shine).

8. Warranty and Support

Warranty Information:

Specific warranty details for this product are not provided in the available information. For warranty inquiries, please refer to the product packaging or contact Rust-Oleum directly.

Customer Support:

For further assistance, technical support, or product information, please visit the official Rust-Oleum website or contact their customer service department. You can also visit the Rust-Oleum Store on Amazon.

9. Official Product Videos

No official product videos from the seller were found in the provided data.