1. Safety Information
Please read all instructions carefully before installing or operating this appliance. Retain this manual for future reference. Failure to follow these instructions may result in electric shock, fire, or personal injury.
- Ensure the power supply matches the voltage specified on the rating label.
- This appliance is for household use only. Do not use it for commercial purposes.
- Do not allow children to operate the appliance without supervision.
- Always disconnect the power supply before cleaning or performing maintenance.
- Ensure adequate ventilation in the room when the range hood is used simultaneously with appliances burning gas or other fuels.
- Do not flambé under the range hood.
- The exhaust air must not be discharged into a flue which is used for exhausting fumes from appliances burning gas or other fuels.
2. Product Overview
The ROBAM 85H1 Built-in Kitchen Hood is designed to efficiently remove smoke, steam, and cooking odors from your kitchen. It features a powerful 1080 m³/h suction capacity, a 360 Pa static pressure, and a 360° Tornado suction system for comprehensive air purification. The hood also incorporates smart gesture control for convenient, touch-free operation and a low noise level for a comfortable cooking environment.
Figure 2.1: Front view of the ROBAM 85H1 Kitchen Hood, showcasing its T-shape design and control panel.
Key Features:
- High Suction Power: Up to 1080 m³/h for effective smoke and odor removal.
- Strong Static Pressure: 360 Pa ensures stable performance even with complex ducting.
- Low Noise Operation: ≤ 55 dB for a quiet kitchen environment.
- 360° Tornado Suction System: Captures fumes and odors from all directions.
- 3.0 Dual-core Absorption System: Enhances suction efficiency and reduces energy consumption.
- Gesture Control: Allows touch-free operation and speed adjustment.
- Wash-Free System: Reduces maintenance requirements.
3. Setup and Installation
3.1 Unpacking
Carefully remove the hood from its packaging. Inspect for any damage during transit. Keep all packaging materials until you are satisfied with the product. Dispose of packaging responsibly.
3.2 Included Components
- ROBAM 85H1 Kitchen Hood unit
- Mounting kit (screws, wall plugs, brackets)
- User Manual
3.3 Installation Requirements
- The hood is designed for wall-mounted or under-cabinet installation.
- Requires ducted ventilation. Ensure proper ducting is available or can be installed.
- Minimum distance between the cooking surface and the lower part of the hood must be maintained as per local regulations (typically 65-75 cm for electric hobs and 75-85 cm for gas hobs).
- A dedicated electrical outlet with appropriate voltage and grounding is required.
3.4 Installation Steps (General)
- Mark Mounting Points: Based on the hood dimensions and desired height, mark the drilling points on the wall for the mounting brackets.
- Drill Holes and Install Brackets: Drill holes and insert wall plugs. Secure the mounting brackets firmly to the wall using the provided screws.
- Mount the Hood: Carefully lift the hood and attach it to the installed mounting brackets. Ensure it is level and securely fastened.
- Connect Ducting: Connect the exhaust duct to the hood's outlet and route it to the external vent. Ensure all connections are sealed to prevent air leaks.
- Electrical Connection: Connect the power cord to the dedicated electrical outlet. Ensure the power is off before making connections.
- Install Chimney (if applicable): Assemble and install the decorative chimney sections, if your installation requires them.
Figure 3.1: Rear view of the ROBAM 85H1 Kitchen Hood, showing the chimney section for ducted installation.
4. Operating Instructions
The ROBAM 85H1 features an intuitive control panel and gesture control for ease of use.
Figure 4.1: Close-up of the ROBAM 85H1 control panel, showing touch buttons for power, light, and fan speed.
4.1 Power On/Off
- Touch Control: Press the Power button (symbol: circle with vertical line) on the control panel to turn the hood on or off.
- Gesture Control: Wave your hand from left to right in front of the gesture sensor to turn the hood on. Wave again to turn it off.
4.2 Suction Speed Control
- Touch Control: Press the Fan Speed buttons (symbols: fan blades) to cycle through different suction speeds (e.g., Low, Medium, High).
- Gesture Control: Wave your hand from right to left in front of the gesture sensor to increase the fan speed. Wave again to decrease the speed.
4.3 Lighting Control
- Press the Light button (symbol: light bulb) on the control panel to turn the integrated lights on or off.
4.4 Quick-Fry Function
- The hood features a one-button quick-fry function. Press the dedicated Quick-Fry button (if available, or a specific fan speed setting) to automatically boost the suction power to its maximum for intense cooking situations. The hood will typically revert to its previous setting after a set period or when manually adjusted.
5. Maintenance
Regular maintenance ensures optimal performance and longevity of your ROBAM 85H1 Kitchen Hood. Always disconnect power before cleaning or servicing.
5.1 Exterior Cleaning
- Wipe the exterior surfaces with a soft cloth dampened with mild detergent and warm water.
- Do not use abrasive cleaners, steel wool, or harsh chemicals, as these can damage the finish.
- Dry thoroughly with a clean, soft cloth.
5.2 Filter Maintenance (Wash-Free System)
The ROBAM 85H1 features a wash-free system designed to minimize manual cleaning of internal components. While this system reduces maintenance, periodic checks are still recommended.
- Periodically inspect the grease collection tray (if applicable) and empty it as needed.
- For any internal cleaning, consult a qualified technician or refer to specific instructions in the full product manual.
5.3 Light Bulb Replacement
If a light bulb needs replacement, ensure the hood is disconnected from power. Refer to the full product manual for specific instructions on accessing and replacing the bulbs, as procedures may vary.
6. Troubleshooting
Before contacting customer service, please refer to the following common issues and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Hood does not turn on | No power supply Power cord not connected Fuse blown | Check power outlet Ensure cord is securely plugged in Check household fuse/circuit breaker |
| Low suction power | Ducting blocked or restricted Incorrect fan speed setting External air pressure | Check ducting for obstructions Increase fan speed Ensure proper room ventilation |
| Excessive noise | Loose components Improper installation Ducting issues | Check for loose screws or parts Ensure hood is securely mounted Inspect ducting for bends or obstructions |
| Lights not working | Light bulb faulty Electrical connection issue | Replace faulty bulb Check electrical connections (consult technician if unsure) |
7. Specifications
Detailed technical specifications for the ROBAM 85H1 Kitchen Hood:
| Feature | Specification |
|---|---|
| Brand | ROBAM |
| Model Number | 85H1 |
| Product Form | Wall-mounted, Under-cabinet |
| Ventilation Type | Ducted/Vented |
| Hood Design | Wall-mounted Canopy (T-shape) |
| Item Weight | 40 Kilograms |
| Product Dimensions (L x W x H) | 90 x 90 x 90 cm |
| Special Features | 360-degree Tornado Suction, Gesture Control |
| Color | Silver-Black |
| Airflow Capacity | 1080 m³/h |
| Static Pressure | 360 Pa |
| Noise Level | ≤ 55 dB |
| Installation Type | Under-cabinet installation |
| Control Type | Gesture Control |
| Included Components | Mounting kit |
| Country of Origin | China |
| First Available Date | May 15, 2025 |
8. Warranty and Support
For warranty information, please refer to the warranty card included with your product or contact ROBAM customer support. Keep your proof of purchase for warranty claims.
If you encounter any issues not covered in the troubleshooting section or require further assistance, please contact ROBAM customer service. Contact details can typically be found on the manufacturer's website or on the product packaging.