DEVAISE AMGZ

DEVAISE AMGZ 47-Inch L-Shaped Gaming Desk User Manual

Model: AMGZ | Brand: DEVAISE

1. Introduction

This manual provides comprehensive instructions for the assembly, operation, and maintenance of your DEVAISE AMGZ 47-Inch L-Shaped Gaming Desk. Please read this manual thoroughly before assembly and use to ensure proper function and longevity of your product. Retain this manual for future reference.

DEVAISE 47-Inch L-Shaped Gaming Desk with LED lights and monitor stand

Figure 1: Overview of the DEVAISE AMGZ 47-Inch L-Shaped Gaming Desk, showcasing its L-shape, integrated monitor stand, LED lighting, and storage drawers.

2. Safety Information

Please observe the following safety precautions:

3. Package Contents

Verify that all parts are included in your package. If any parts are missing or damaged, please contact customer support.

Detailed view of the DEVAISE desk's storage drawers

Figure 2: Illustration of the three storage drawers, including one designed for letter/A4 files, highlighting their fabric construction and integrated handles.

4. Assembly Instructions

Follow these steps carefully for assembly. It is recommended to have two people for certain steps.

  1. Unpack and Identify Parts: Lay out all components on a clean, soft surface. Refer to the parts list to ensure everything is present.
  2. Assemble the Steel Frame: Connect the main steel frame components using the provided screws and Allen wrench. Do not fully tighten screws until all frame parts are loosely assembled.
  3. Attach Desktop Panels: Secure the L-shaped desktop panels to the assembled steel frame. Ensure proper alignment before tightening all screws.
  4. Install Monitor Stand: Place the monitor stand on the designated area of the desktop. It can be positioned for optimal viewing.
  5. Assemble Storage Unit: Construct the frame for the storage drawers. Insert the two fabric drawers into their respective slots. The bottom drawer is designed to hold A4/legal files.
  6. Integrate Power Strip: Carefully insert the recessed power strip into the pre-cut opening on the desktop. Ensure it is flush with the surface.
  7. Attach LED Light Strip: Adhere the LED light strip to the underside of the monitor stand or desired location using its adhesive backing. Connect it to the smart controller.
  8. Install Headphone Hook: Attach the headphone hook to the side of the desk frame as desired.
  9. Adjust Footpads: Adjust the non-slip footpads at the bottom of the desk legs to ensure stability on uneven floors.
  10. Final Tightening: Once all components are in place and aligned, fully tighten all screws.
DEVAISE L-shaped desk in a gaming setup with blue LED lighting

Figure 3: The DEVAISE L-shaped desk integrated into a gaming environment, demonstrating the LED lighting effects and the placement of a monitor, keyboard, and mouse.

5. Operating Instructions

5.1. LED Light Operation

The integrated LED lights can be controlled via a smart controller or a dedicated mobile application.

Smart controller features for LED lights

Figure 4: Visual representation of the smart controller's capabilities, including 31 light modes, palette switch, music rhythm synchronization, and timer functions.

5.2. Power Outlet Usage

The desk includes a recessed power strip for convenient device charging.

Recessed power strip with AC outlets and USB ports

Figure 5: Close-up view of the recessed power strip, detailing the two AC outlets and two USB ports, along with the integrated power cord.

6. Maintenance

7. Troubleshooting

ProblemPossible CauseSolution
Desk is wobbly.Loose screws or uneven floor.Tighten all assembly screws. Adjust the non-slip footpads to level the desk.
LED lights not turning on.Power connection issue, controller malfunction.Ensure the LED strip is properly connected to the power source and controller. Check if the power outlet is functional. Try a long press on the controller to reset.
Power outlets/USB ports not working.Power strip not plugged in, faulty device, power surge.Verify the desk's main power cord is securely plugged into a working wall outlet. Test with a different device. If issues persist, contact customer support.
Drawers do not slide smoothly.Improper assembly of drawer frame or overloaded drawers.Recheck the assembly of the drawer unit. Ensure drawers are not overloaded.

8. Product Specifications

Product dimensions diagram for the DEVAISE L-shaped desk

Figure 6: Detailed diagram illustrating the key dimensions of the DEVAISE L-shaped desk, including overall length, width, height, and specific measurements for the monitor stand and storage sections.

9. Warranty Information

DEVAISE products are covered by a limited warranty against manufacturing defects. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official DEVAISE website. Please retain your proof of purchase for warranty claims.

10. Customer Support

If you have any questions, require assistance with assembly, or encounter any issues with your DEVAISE AMGZ desk, please contact our customer support team:

When contacting support, please have your model number (AMGZ) and purchase information ready.

Related Documents - AMGZ

Preview DEVAISE ABGZ513 L-Shaped Desk - Assembly Instructions
Official assembly instructions and safety guidelines for the DEVAISE ABGZ513 L-Shaped Desk. Learn how to assemble your home office furniture safely and efficiently.
Preview Fabric 1 Drawer Printer Stand V3.1 Assembly Instructions
Detailed assembly instructions and guidelines for the Fabric 1 Drawer Printer Stand V3.1, including parts list, warnings, and step-by-step guidance.
Preview DEVAISE AHDG041 Fabric 3 Drawer File Cabinet Assembly Instructions
Step-by-step assembly guide for the DEVAISE AHDG041 Fabric 3 Drawer File Cabinet, including parts list, important safety information, and assembly tips. Ensure proper installation for your home or office.
Preview Fabric 1 Drawer Printer Stand Assembly Instructions - V3.1
Comprehensive assembly instructions for the DEVAISE Fabric 1 Drawer Printer Stand (Model V3.1). Includes detailed steps, parts list, general guidelines, and safety warnings for easy installation.
Preview DEVAISE ADYJ002 Wood Printer Organizer with Shelf Assembly Instructions
Official assembly instructions for the DEVAISE ADYJ002 Wood Printer Organizer with Shelf. Includes parts list, step-by-step guidance, and adjustment tips.
Preview DEVAISE ADYJ004 Fabric 1 Drawer Printer Stand Assembly Instructions
Official assembly instructions for the DEVAISE ADYJ004 Fabric 1 Drawer Printer Stand. This comprehensive manual provides detailed parts lists, an exploded view, and step-by-step assembly instructions with textual descriptions of diagrams. Includes important safety guidelines, warnings, and contact information for DEVAISE customer support.