Introduction
This manual provides instructions for the ABBREE AR-805S and AR-806+ Mini Short Dual Band VHF/UHF Ham Radio Antennas. These antennas are designed to enhance communication distance and clarity for compatible two-way radios. Their compact size offers portability and convenience.
Package Contents
- 2 x ABBREE AR-805S Antennas
- 2 x ABBREE AR-806+ Antennas
Product Features
- Dual Band Operation: Supports VHF (144MHz) and UHF (430MHz) frequencies.
- Enhanced Range: High gain design to increase communication distance.
- Compact Size: AR-805S is 1.96 inches (5cm), AR-806+ is 3.14 inches (8cm) for easy portability.
- SMA-Female Connector: Compatible with a wide range of ham radios.
- Max Power: 10W.
- Impedance: 50 OHM.
Compatibility
These antennas feature an SMA-Female connector and are compatible with various ham radio models, including but not limited to:
- Baofeng: UV-5R, UV-5RH, UV-32, UV-21 PRO, DM-32, M-13 PRO, BF-888S, K61, K6, UV-13 PRO, UV-17 PRO, UV-5RM, BF-F8HP PRO, K5 PLUS, UV-21R, GM21
- Quansheng: UV-K5, UV-K5 8, UV-K6, TK11-88, RT-860, TD-H8, TD-H3
Installation and Setup
- Identify Connector Type: Ensure your radio has an SMA-Female connector. The ABBREE antennas are designed with an SMA-Female connector.
- Attach Antenna: Carefully screw the antenna onto the radio's antenna port. Turn clockwise until finger-tight. Do not overtighten.
- Using a Shim (Optional): If there is a slight gap between the antenna and the radio after tightening, a rubber shim (often included with radios or antennas) can be used to ensure a snug fit and protect the connector.
Operation
Once installed, the ABBREE mini short antennas are ready for use. Their design aims to provide stable communication and increased range compared to standard stock antennas, particularly beneficial for short-range communication needs.
- Stable Communication: Experience improved signal reception and transmission.
- Portability: The short length of these antennas makes them ideal for carrying your radio in pockets or pouches without snagging or discomfort.
- Flexibility: The flexible design reduces the risk of damage during active use or storage.
Specifications
| Feature | AR-805S | AR-806+ |
|---|---|---|
| Frequency | 144/430MHz (VHF/UHF) | 144/430MHz (VHF/UHF) |
| Gain (MAX) | 2.15dBi | 3.0dBi |
| Max Power | 10W | 10W |
| Impedance | 50 OHM | 50 OHM |
| Connector | SMA-Female | SMA-Female |
| Antenna Length | 1.96 inches (5cm) | 3.14 inches (8cm) |
| Color | Black | Black |
Maintenance
To ensure optimal performance and longevity of your ABBREE antennas:
- Regular Cleaning: Wipe the antenna with a soft, dry cloth to remove dust and dirt. Avoid harsh chemicals.
- Inspect Connector: Periodically check the SMA-Female connector for any signs of corrosion or damage. Ensure it remains clean and free of debris.
- Proper Storage: Store antennas in a cool, dry place away from direct sunlight and extreme temperatures when not in use.
- Avoid Excessive Bending: While flexible, avoid extreme or repetitive bending at the connector base to prevent internal wire damage.
Troubleshooting
If you experience issues with your antenna, consider the following:
- Poor Signal/Range:
- Ensure the antenna is securely tightened to the radio.
- Verify the antenna is compatible with your radio's frequency bands (VHF/UHF).
- Check for obstructions in your environment that might be blocking the signal.
- Test with another known-good antenna to rule out radio issues.
- Antenna Not Fitting Properly:
- Confirm your radio has an SMA-Female connector. These antennas are SMA-Female.
- If a small gap exists, use a rubber shim for a better fit.
Warranty and Support
For warranty information or technical support, please refer to the official ABBREE website or contact your retailer. Keep your purchase receipt for any warranty claims.