1. Introduction
Thank you for choosing the EDISHINE LED Floor Lamp. This modern and minimalist standing lamp is designed to provide versatile lighting for various indoor spaces. It features an adjustable 3-color temperature LED bulb, a convenient foot pedal switch, and a stable base for safe and easy use.
This manual provides essential information for the safe and efficient operation of your new floor lamp. Please read it thoroughly before assembly and use, and retain it for future reference.
2. Safety Instructions
- Ensure the power supply is disconnected before assembly, disassembly, or cleaning.
- Use only the specified bulb type and wattage (9W A19 LED bulb included).
- Do not expose the lamp to water or excessive moisture. This product is for indoor use only.
- Place the lamp on a stable, level surface to prevent tipping.
- Keep the power cord away from heat sources, sharp edges, and moving parts.
- Do not attempt to modify or repair the lamp yourself. Contact qualified personnel for service.
- Keep packaging materials away from children to prevent choking hazards.
3. Package Contents
Verify that all components are present and undamaged before proceeding with assembly.
- Lampshade x1
- Lamp Pole (multiple sections) x1
- Lamp Base x1
- 9W A19 LED Bulb x1
- User Manual x1
Figure 1: Package Contents
4. Assembly Instructions
Follow these steps to assemble your EDISHINE LED Floor Lamp. No additional tools are required.
- Connect the Base: Screw the bottom-most lamp pole section into the heavy-duty lamp base. Ensure it is tightened securely.
- Assemble the Lamp Pole: Connect the remaining lamp pole sections by screwing them together clockwise, working your way up from the base. Ensure each section is firmly connected. The power cord is pre-routed through the pole.
- Install the Lampshade: Unroll the fabric lampshade. Attach the metal rings to the top and bottom edges of the lampshade, securing them with the provided clips or Velcro.
- Attach Lampshade to Lamp Holder: Unscrew the socket ring from the lamp holder at the top of the assembled pole. Place the assembled lampshade over the lamp holder and then screw the socket ring back on to secure the lampshade in place.
- Install the LED Bulb: Carefully screw the included 9W A19 LED bulb into the lamp holder. Do not overtighten.
Figure 2: Detailed Assembly Steps
Video 1: EDISHINE Modern Floor Lamps for Living Room - This video provides a general overview of the lamp's features and assembly process.
5. Operating Instructions
The EDISHINE LED Floor Lamp is operated using a convenient foot pedal switch. The included LED bulb offers three color temperature settings.
- Power On/Off: Plug the lamp into a standard electrical outlet. Press the foot pedal switch once to turn the lamp ON. Press it again to turn the lamp OFF.
- Change Color Temperature: When the lamp is ON, press the foot pedal switch repeatedly to cycle through the three color temperature settings: 2700K (Warm Light), 4000K (Natural Light), and 5000K (White Daylight).
Figure 3: Adjustable 3-Color Temperature Settings
Figure 4: Convenient Foot Pedal Switch
Video 2: Color Changing for Every Occasion - This video demonstrates how the lamp's color temperature can be changed to suit different moods and activities.
6. Care and Maintenance
- Cleaning: Disconnect the power before cleaning. Wipe the lamp with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Bulb Replacement: Ensure the lamp is unplugged and the bulb has cooled down. Unscrew the old bulb and replace it with a new 9W A19 LED bulb (E26 base).
- Storage: If storing the lamp, disassemble it and pack it in its original packaging to protect it from damage.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Lamp does not turn on. | Power cord not plugged in. | Ensure the power cord is securely plugged into a working outlet. |
| Bulb is loose or faulty. | Tighten the bulb or replace it with a new one. | |
| Lamp flickers. | Loose bulb connection. | Tighten the bulb. |
| Incompatible bulb. | Ensure you are using a compatible LED bulb. | |
| Foot switch unresponsive. | Power issue or internal fault. | Check power connection. If problem persists, contact customer support. |
8. Specifications
| Feature | Specification |
|---|---|
| Model Number | KL-F021 |
| Brand | EDISHINE |
| Product Dimensions | 8.27"D x 8.27"W x 63.8"H |
| Item Weight | 6.15 Pounds |
| Material Type | Metal (Base), Fabric (Shade) |
| Finish Type | Painted |
| Color | Brown |
| Light Source Type | LED |
| Bulb Base | E26 |
| Bulb Type | 9W A19 LED (Included) |
| Color Temperature | 2700K/4000K/5000K (Adjustable) |
| Switch Type | Foot Pedal Switch |
| Power Source | Corded Electric |
| Cord Length | 78.7 inches |
| Indoor/Outdoor Usage | Indoor |
9. Warranty and Support
For warranty information or customer support, please refer to the contact details provided with your purchase or visit the official EDISHINE website. Keep your purchase receipt as proof of purchase.
