1. Introduction
This manual provides essential information for the safe and efficient operation of your Electactic Portable Air Conditioner. Please read it thoroughly before installation and use, and retain it for future reference.
Key Features:
- 3-in-1 Modes: Offers Cooling, Fan, and Dehumidifier functions for versatile climate control.
- Efficient Cooling: 10000 BTU (ASHRAE) / 6000 BTU (SACC) capacity cools areas up to 450 sq. ft.
- Temperature Control: Adjustable temperature range from 61°F to 90°F.
- Sleep Mode: Maintains optimal temperature at low speed for comfortable rest.
- Timer Function: Programmable 1-24 hour on/off timer.
- Easy Mobility: Equipped with casters and side handles for convenient movement between rooms.
- Dual Control: Features an LED display control panel and a full-function remote control.
- Child Lock: Prevents accidental changes to settings.
2. Product Overview
Components Included:
- Portable Air Conditioner Unit
- Remote Control (2 x AAA batteries not included)
- User Manual
- Water Hose (4.1ft)
- Window Sealing Kits (Exhaust hose 4.9ft, Hose connector, Window Kit Connector, Window Kit)
Unit Features:
The portable air conditioner features an intuitive LED display control panel on top and adjustable louvers on the front for directing airflow. It is designed with 360° caster wheels and built-in handles for easy mobility. The air filter is detachable and washable for convenient maintenance.
3. Setup & Installation
3.1 Window Kit Installation:
- Open the window where the air conditioner will be used. Remove any window screens if present.
- Connect the hose connector to one end of the exhaust hose.
- Connect the window kit adapter to the other end of the exhaust hose.
- Extend the adjustable window kit to the length of your window.
- Place the adjustable window kit into the window opening. Close the window to secure the kit in place.
- Attach the hose connector to the exhaust air outlet unit on the back of the air conditioner.
The window kit is suitable for double/single-hung windows and sliding sash windows with sizes ranging from 26 to 50 inches.
3.2 Drainage Setup (for Dehumidifier Mode):
For continuous drainage in dehumidifier mode or high humidity environments, connect the provided water hose to the drainage hole at the bottom of the unit. Ensure the hose is placed to drain into a suitable container or floor drain. If not using continuous drainage, the internal water tank will collect condensate and the unit will automatically shut off when full, requiring manual emptying.
4. Operating Instructions
The air conditioner can be operated using the LED display control panel on top of the unit or the remote control.
4.1 Control Panel Functions:
- Power Button: Turns the unit on or off.
- Mode Button: Cycles through Cooling, Fan, and Dehumidifier modes.
- Up/Down Buttons: Adjusts the desired temperature (61°F - 90°F) or sets the timer duration.
- Speed Button: Adjusts fan speed (Low/High).
- Timer Button: Sets the auto on/off timer (1-24 hours).
- Sleep Button: Activates sleep mode, which gradually adjusts temperature for comfort and energy saving.
- Lock Button: Engages child lock to prevent unintended operation.
4.2 Sleep Mode:
In Cooling mode, activating Sleep Mode will maintain an optimal temperature at a low fan speed, providing a suitable environment for relaxation and sleep. The unit will automatically adjust the temperature incrementally to ensure comfort throughout the night.
5. Maintenance
5.1 Air Filter Cleaning:
For optimal performance and reduced operational noise, clean the air filter at least once every two months. Unplug the unit before cleaning. Remove the air filter from the back of the unit. If it is stubborn dirt or dust, immerse it in lukewarm water and rinse a couple of times. Let the filter dry completely before re-attaching to the main unit.
5.2 Manual Drainage:
When the machine stops after the water tank is full, unplug the power plug. Place a water container below the side water outlet behind the unit. Unplug the water plug, the water will automatically flow into the water container. When the water is fully discharged, place the water plug back into place.
6. Troubleshooting Table
| Symptom | Inspection | Solution |
|---|---|---|
| The unit is not operating. | Check the power connection is secure. Check if the water level indicator lights up? Check the room temperature. | Insert the power cord securely into the wall outlet. Empty the drain pan by removing the rubber plug. The range of operating temperature is 61-90°F. |
| The unit works with reduced capacity. | Check the air filter for dirt. Check if the air duct is blocked. Check if the room door or window is open. Check if the desired operating mode is selected and the temperature is properly set. | Clean the air filter as necessary. Clear the obstacle. Keep the door and windows closed. Set the mode and temperature at proper set-point according to the manual. |
| Water Leakage | The exhaust hose is detached. Overflow while moving the unit. Check if the drain hose is kinked or bent. Check if the unit is securely positioned. | Make sure the exhaust hose is securely attached. Empty the water tank before transportation. Straighten the hose to avoid a trap existing. Place the unit on horizontal and firm ground. |
| Excessive Noise | Check if there are any loose or vibrating parts. The noise sounds like water flowing. | Secure and tighten the parts. Noise coming from flowing refrigerant. This is normal. |
| Error Codes E0, E1, E2, R | Communication faults between the main PCB and display PCB. Ambient temperature sensor failure. Coil temperature sensor failures. Condensate water high level alarm. | Check the wire harness of the display PCB for damage. Check the connection or replace it. To clean or replace the temperature sensor. Check the connection or replace it. To clean or replace the temperature sensor. Empty the drain pan by removing the rubber plug. |
7. Specifications
| Feature | Detail |
|---|---|
| Brand | Electactic |
| Model Name | Portable Air Conditioner |
| Model Number | OL-A016AB06N3 |
| Cooling Power | 10000 British Thermal Units (ASHRAE) / 6000 BTU (SACC) |
| Cooling Area | Up to 450 sq. ft. |
| Modes | Cooling, Fan, Dehumidifier |
| Temperature Range | 61°F to 90°F |
| Dehumidifier Capacity | 40 Pints/day |
| Noise Level | 54 Decibels |
| Product Dimensions | 11.8"D x 11"W x 27.2"H |
| Item Weight | 42.79 lbs (Net) / 45 lbs (Shipping) |
| Voltage | 115V (60Hz) |
| Wattage | 800.0W |
| Color | White |
| Special Features | Child Lock, Fast Cooling, Remote Controlled, Sleep Mode |
| Installation Method | Window (suitable for 26" to 50" double/single-hung and sliding sash windows) |
8. Warranty & Support
This product comes with a 1-Year Warranty. For any product inquiries, technical assistance, or warranty claims, please contact customer support. Refer to the contact information provided in your user manual or on the product packaging.
