1. Product Overview
The KOPUO R61 is a versatile 5-in-1 device designed for automotive emergencies and convenience. It combines a powerful car jump starter, a 150 PSI air compressor, a portable power bank, and an LED flashlight with SOS functions. This manual provides essential information for safe and effective use of your device.
- Jump Starter: Delivers 4000A peak current to start 12V vehicles with up to 9.0L gas or 8.0L diesel engines.
- Air Compressor: Inflates tires up to 150 PSI with preset modes for various vehicles and a digital display for accurate pressure readings.
- Power Bank: Equipped with USB ports to charge mobile devices.
- LED Light: Features a bright flashlight, strobe, and SOS modes for emergency situations.
- Safety Protections: Incorporates multiple safety features including over-charge, low voltage, reverse polarity, high-temperature, short circuit, low-temperature, overload, and over-discharge protection.
Image 1.1: The KOPUO R61 5-in-1 Car Jump Starter and Air Compressor, showcasing its compact design and various ports.
2. Safety Information
Please read all safety warnings and instructions before using this product. Failure to follow these instructions may result in electric shock, fire, and/or serious injury.
- Do not operate the device if it is damaged.
- Keep out of reach of children.
- Do not expose the device to rain or wet conditions.
- Do not disassemble the device. Contact qualified service personnel for repairs.
- Ensure proper ventilation during use, especially when operating the air compressor.
- Always connect the jump starter clamps in the correct polarity (red to positive, black to negative).
- Avoid direct contact with the air hose and nozzle during and immediately after inflation, as they may become hot.
- Store the device in a cool, dry place away from direct sunlight and flammable materials.
Image 2.1: Illustration of the smart clamps protection features, including over charge, low voltage, reverse polarity, high-temperature, short circuit, low-temperature, over load, over discharge, and over current protection.
3. Package Contents
Verify that all items are present in the package:
- KOPUO R61 Jump Starter
- Smart Jump Cables
- USB Type-C Charging Cable
- Storage Case
- Air Hose
- Various Valve Adapters
- User Manual (this document)
Image 3.1: The KOPUO R61 device along with its included accessories: smart jump cables, USB-C charging cable, air hose, valve adapters, and a protective storage case.
4. Device Components and Setup
4.1. Component Identification
Familiarize yourself with the main parts of the KOPUO R61:
- Digital LED Display: Shows battery level, air pressure, and operating modes.
- Power Button: Turns the device on/off and cycles through LED light modes.
- Mode Button (M): Selects inflation pressure units (PSI, BAR, KPA) or preset modes.
- +/- Buttons: Adjusts target air pressure.
- Jump Start Port: For connecting smart jump cables.
- Air Hose Port: For connecting the air hose.
- USB Output Ports: For charging external devices.
- USB Type-C Input Port: For charging the R61 device.
- LED Flashlight: Integrated light for illumination.
Image 4.1: Close-up view of the KOPUO R61's digital LED display and control buttons, showing real-time and preset inflation values.
4.2. Initial Charging
Before first use, fully charge the KOPUO R61. Connect the provided USB Type-C charging cable to the device's input port and a suitable USB power adapter (not included). The digital display will indicate the charging status. A full charge typically takes several hours.
5. Operating Instructions
5.1. Jump Starting a Vehicle
- Ensure the KOPUO R61 is fully charged (at least 75% battery recommended).
- Turn off the vehicle's ignition and all accessories.
- Connect the red clamp of the smart jump cables to the positive (+) terminal of the vehicle's battery.
- Connect the black clamp of the smart jump cables to the negative (-) terminal of the vehicle's battery.
- Plug the smart jump cable connector into the jump start port on the KOPUO R61.
- Wait for the indicator light on the smart cable to turn solid green (or follow specific instructions on the smart cable).
- Start the vehicle's engine.
- Once the engine starts, immediately disconnect the smart jump cable from the KOPUO R61, then remove the black clamp from the vehicle battery, followed by the red clamp.
Important: Do not crank the engine for more than 3 seconds. If the engine does not start, wait at least 30 seconds before attempting again.
5.2. Using the Air Compressor
- Connect the air hose to the air hose port on the KOPUO R61.
- Attach the appropriate valve adapter to the air hose and then to the tire valve or inflatable item.
- Turn on the KOPUO R61. The digital display will show the current pressure.
- Press the 'M' button to cycle through pressure units (PSI, BAR, KPA) or to select a preset inflation mode (car, motorcycle, bicycle, ball).
- Use the '+' and '-' buttons to set the desired target pressure.
- Press the power button (or designated start button for compressor) to begin inflation. The compressor will automatically stop once the target pressure is reached.
- Disconnect the air hose from the item and the device.
Image 5.1: The KOPUO R61 inflating a car tire, highlighting its rapid inflation capability and 150 PSI maximum pressure.
5.3. Using as a Power Bank
Connect your USB-powered devices (e.g., smartphone, tablet) to the USB output ports on the KOPUO R61 using their respective charging cables. The device will automatically begin charging. The digital display may show the remaining battery capacity.
5.4. Using the LED Light
To activate the LED light, long-press the power button. Short-press the power button to cycle through different modes: constant light, strobe, and SOS signal. Long-press again to turn off the light.
Image 5.2: The KOPUO R61 demonstrating its LED flashlight function and its ability to charge external devices like smartphones and action cameras.
6. Maintenance
- Cleaning: Wipe the device with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners.
- Storage: Store the KOPUO R61 in its protective case in a cool, dry environment. Avoid extreme temperatures.
- Battery Care: For optimal battery life, charge the device every 3-6 months, even if not in use. Do not store with a completely depleted battery.
- Cable Inspection: Regularly inspect jump cables and air hose for any signs of damage or wear. Replace if necessary.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Device does not turn on. | Battery is depleted. | Charge the device fully. |
| Vehicle does not jump start. | Incorrect clamp connection; vehicle battery too low; engine too large. | Ensure clamps are connected correctly (red to +, black to -). Check device battery level. Confirm vehicle engine size is within specifications. |
| Air compressor not inflating. | Air hose not securely connected; target pressure not set; device battery low. | Check all connections. Set a target pressure. Charge the device. |
| Smart jump cable indicator light not green. | Reverse polarity; short circuit; low voltage. | Check clamp connections. Ensure no metal parts are touching. Charge the device. |
8. Specifications
| Feature | Specification |
|---|---|
| Model | R61 |
| Peak Output Current | 4000 Amps |
| Engine Compatibility | Up to 9.0L Gas / 8.0L Diesel |
| Air Compressor Max Pressure | 150 PSI |
| Product Dimensions (L x W x H) | 7.48" x 3.93" x 2.36" (19cm x 10cm x 6cm) |
| Item Weight | 2.8 Pounds (1.27 kg) |
| Battery Type | Lithium Ion (1 required) |
| Manufacturer | Dongguan Borui Intelligent Technology Co., Ltd |
Image 8.1: The KOPUO R61 device with its key dimensions labeled.
9. Warranty and Support
KOPUO products are designed and manufactured to the highest quality standards. For information regarding warranty coverage, please refer to the warranty card included with your purchase or contact KOPUO customer support directly.
If you encounter any issues or have questions about your KOPUO R61 device, please contact our customer support team for assistance. Contact information can typically be found on the product packaging or the official KOPUO website.
