Introduction
This manual provides essential information for the assembly, operation, maintenance, and troubleshooting of your FLEXISPOT EC5 Lite Electric Standing Desk. Please read these instructions carefully before use to ensure safe and efficient operation.
- Silent 2-Motor Lifting System: This desk features two powerful and quiet motors, offering smooth height adjustment from 60 to 125 cm with a noise level below 50 dB.
- Robust and Stable Structure: Built with reinforced steel and a three-column design, it supports up to 100 kg. Assembly is straightforward.
- Smart Memory Panel: The elegant LED panel allows you to save up to 4 custom height settings for quick adjustments.
- Anti-Collision Safety Technology: The desk automatically stops and retracts when it detects an obstacle, ensuring safety.
- Reliability and Warranty: Backed by 20 years of FlexiSpot ergonomic expertise, with a 5-year warranty on the frame and motors, and 2 years on electronic components.
Safety Information
To ensure your safety and the longevity of your desk, please adhere to the following guidelines:
- Do not exceed the maximum weight capacity of 100 kg. Overloading can cause damage and pose a safety risk.
- Ensure the desk is properly anchored to the wall if recommended or if there is any risk of tipping, especially when fully extended.
- Utilize the anti-collision technology to avoid obstacles and accidents. Keep the area around the desk clear during height adjustments.
- Keep children and pets away from the desk during operation.
- Do not sit or stand on the desk frame.
- Disconnect power before cleaning or performing any maintenance.
Setup and Assembly
Assembly of the FLEXISPOT EC5 Lite desk frame is designed to be simple and intuitive. All necessary assembly tools are included in the package.
- Unpack all components and verify against the parts list provided in the separate assembly guide.
- Follow the step-by-step instructions in the included assembly manual to correctly assemble the desk frame.
- Attach your chosen desktop to the assembled frame using the provided hardware.
- Connect the control panel and power supply according to the diagrams.
Operating Instructions
Your FLEXISPOT EC5 Lite desk features an intuitive control panel for easy height adjustment and memory functions.
- Height Adjustment: Use the up and down arrows on the control panel to adjust the desk height. The desk can be adjusted smoothly between 60 cm and 125 cm.
- Memory Presets: The control panel allows you to save up to 4 preferred height settings. To save a height, adjust the desk to the desired position, then press the 'M' button followed by a number (1-4). The desk will then move to this saved height with a single press of the corresponding number button.
- Digital Display: The current desk height is shown on the digital display.
- Anti-Collision System: The desk is equipped with an anti-collision feature. If the desk encounters an obstacle during adjustment, it will automatically stop and reverse slightly to prevent damage or injury.
Maintenance
Regular maintenance ensures the optimal performance and longevity of your standing desk.
- Cleaning: Wipe the desk frame and control panel with a soft, damp cloth. Avoid abrasive cleaners or solvents. Ensure the power is disconnected before cleaning.
- Cable Management: Periodically check all cables for wear or damage. Ensure cables are neatly managed to prevent snagging or disconnection.
- Connection Check: Ensure all electrical connections are secure and free from moisture.
- Weight Distribution: Distribute weight evenly across the desktop to prevent strain on the motors and frame.
Troubleshooting
If you encounter any issues with your desk, refer to the following common troubleshooting steps:
| Problem | Possible Cause | Solution |
|---|---|---|
| Desk does not move | No power, loose connection, motor overload. | Check power cable connection. Ensure outlet is functional. Disconnect and reconnect all cables. Wait 20 minutes for motors to cool if overloaded. |
| Anti-collision system activates unexpectedly | Obstruction detected, sensitivity setting. | Clear any objects around the desk. Refer to the full manual for instructions on adjusting anti-collision sensitivity or performing a reset. |
| Uneven height adjustment | Uneven load, calibration issue. | Ensure weight is evenly distributed. Perform a system reset/calibration as per the detailed manual. |
| Error code displayed | System malfunction. | Note the error code and consult the comprehensive user manual or contact customer support for specific guidance. |
For more detailed troubleshooting or issues not listed here, please refer to the full user manual or contact FLEXISPOT customer support.
Specifications
Key technical specifications for the FLEXISPOT EC5 Lite Electric Standing Desk:
- Brand: FLEXISPOT
- Model: EC5 Lite (EC5-Série)
- Desk Design: Standing Desk
- Frame Material: Alloy Steel
- Top Material Type: Metal (Desktop not included)
- Color: Black
- Minimum Height: 60 Centimeters
- Maximum Height: 125 Centimeters
- Recommended Maximum Load: 100 Kilograms
- Speed: 25 mm/s
- Noise Level: <50 dB
- Special Features: Electric, Height Adjustable, Smart Memory, Anti-collision Safety
- Assembly Required: Yes
- All Assembly Tools Included: Yes
- GTIN/UPC: 840460467506
Warranty and Support
FLEXISPOT stands behind the quality of its products.
- Warranty: The FLEXISPOT EC5 Lite desk frame comes with a 5-year limited warranty on the frame and motors, and a 2-year limited warranty on electronic components. This warranty covers manufacturing defects and ensures peace of mind.
- Customer Support: For any questions, technical assistance, or warranty claims, please contact FLEXISPOT GmbH. You can find their contact information on the official FLEXISPOT website or through your purchase platform.