FEZIBO 48x24 Electric Height Adjustable Standing Desk User Manual

Introduction

Thank you for choosing the FEZIBO Electric Height Adjustable Standing Desk. This manual provides essential information for the safe and efficient assembly, operation, and maintenance of your new desk. Please read it thoroughly before use and retain it for future reference.

Important Safety Information

• Always follow the assembly instructions carefully.
• Keep hands and fingers away from moving parts when adjusting the desk height.
• Ensure the desk is properly anchored to the floor to prevent tipping.
• Do not exceed the weight limit of the desk.
• Keep desktop clear of walls during operation.
• Remove obstacles > 20"/51cm under desk.
• Anti-collision is not auto-enabled during reset.
• Supervise Children: Never allow children to climb, hang, or play on or under the desk, especially when in motion.
• Operate at 32°F - 104°F (0°C - 40°C).
• Keep away from corrosive substances and excessive dust.
• Wipe with cloth dampened in mild cleaner.
• The company is not liable for damage or injury caused by abnormal or unintended desk use.

Setup Guide

Most components are pre-assembled for quick setup. Assembly typically takes about 30 minutes. A Phillips screwdriver or drill (not provided) is required.

Assembly Steps

1. Prepare the Workspace: Assemble with a partner on a clean, flat, protective surface (e.g., a blanket) to prevent scratches. Ensure ample space, ideally twice the tabletop size.
2. Assemble the Frame: Follow the detailed instructions provided in the packaging to connect the motor, sync rod, and legs. Ensure the motor and sync rod are correctly positioned.
3. Attach the Crossbeam: Pay attention to the direction of the crossbeam, ensuring all holes align for secure fastening.
4. Join Tabletop Panels: If your tabletop comes in multiple pieces, use the provided screws and accessories to firmly join them together.
5. Mount the Control Panel and Hooks: Secure the control panel and headphone hooks to the underside of the tabletop using the designated screws.
6. Connect Wiring: Plug in all necessary cords for the motor and control panel.
7. Team Lift: With a partner, carefully flip the assembled desk upright onto its feet.
8. Initial Reset: Perform a manual reset after initial installation or power cycle.

Image: Detailed product dimensions of the FEZIBO Standing Desk, showing a 48" x 24" two-piece wood tabletop and height range from 28.4" to 46.5". Various tabletop sizes are also illustrated.

Image: An overhead view of all components required for assembling the FEZIBO Standing Desk, including the two-piece tabletop, frame legs, crossbeam, motor, control panel, and various screws and tools. A woman is shown holding a screwdriver, indicating ease of assembly.

Video: An official FEZIBO video demonstrating the assembly process of the Electric Standing Desk. It covers step-by-step instructions for putting together the frame, attaching the tabletop, and connecting the electronic components.

Operating Instructions

Electric Height Adjustment

Your FEZIBO standing desk features an electric lifting system for seamless transitions between sitting and standing positions. The reliable motor operates with low noise (under 45 dB).

• Use the Up (▲) and Down (▼) buttons on the control panel to manually adjust the desk height.
• The LED display shows the current desk height.

Memory Height Settings

The control panel includes three programmable memory height buttons (1, 2, 3) to save your preferred sitting and standing heights.

1. Adjust the desk to your desired height using the Up/Down buttons.
2. Press the "S" button (Set) once.
3. Within 3 seconds, press one of the memory buttons (1, 2, or 3) to save the current height. The display will show "S-" followed by the number to confirm.
4. To recall a saved height, simply press the corresponding memory button (1, 2, or 3). The desk will automatically move to that position.

Anti-Collision Technology

The desk is equipped with anti-collision technology. If the adjustable desk encounters an obstacle (e.g., a chair, cabinet, or wall) while moving up or down, it will automatically stop and reverse approximately 2cm to prevent damage or injury. Note that anti-collision is not auto-enabled during a manual reset.

Image: A close-up of the FEZIBO Standing Desk's control panel, featuring an LED display showing the current height (e.g., "029"), Up and Down arrow buttons, and three memory preset buttons (1, 2, 3). Instructions for resetting the desk are also visible.

Image: A man working at a FEZIBO Standing Desk, illustrating the ergonomic benefits of a sit-stand workstation. The desk is at a standing height, promoting natural posture and reducing strain.

Image: A white cat sleeping peacefully on a FEZIBO Standing Desk while the desk is in operation, emphasizing the "Whisper-Level Lifting, No Distractions" feature with a noise level indicated as "db≤55".

Maintenance

• Cleaning: Wipe the desk surfaces with a cloth dampened in a mild cleaner. Avoid abrasive cleaners or harsh chemicals that could damage the finish.
• Environmental Conditions: Operate the desk within the recommended temperature range of 32°F - 104°F (0°C - 40°C). Keep the desk away from corrosive substances and excessive dust to ensure longevity of the motor and components.
• Regular Checks: Periodically check all screws and connections to ensure they are tight and secure.

Troubleshooting

If you encounter any issues with your FEZIBO Standing Desk, please refer to the following common solutions:

• Desk Not Moving:
  • Ensure the power cord is securely plugged into both the desk and a working wall outlet.
  • Check for any obstructions under or around the desk that might be triggering the anti-collision system.
• Resetting the Desk: If the desk is unresponsive or displaying an error code, perform a manual reset.
  • Press and hold the "DOWN" (▼) button for 5 seconds until the desk moves to its lowest position and then slightly back up. This indicates a successful reset.
• Uneven Movement: If the desk moves unevenly, ensure all screws are tightened and the desk is on a level surface. Perform a reset if necessary.

If these steps do not resolve the issue, please contact customer support.

Specifications

Warranty & Support

Your FEZIBO Standing Desk comes with a Limited Warranty. For specific terms and conditions, please refer to the warranty documentation included with your product.

If you have any questions, require assistance with assembly, operation, or troubleshooting, our customer support team is available to help. Please refer to the contact information provided in your product packaging or visit the official FEZIBO website for support resources.

You can also visit the FEZIBO Store on Amazon for more information and products.