1. Introduction
Thank you for choosing the Butterfly ZieraChrome 750 Watt Mixer Grinder. This appliance is designed to provide efficient and consistent grinding for various kitchen tasks. Please read this manual carefully before operating the appliance to ensure safe and optimal performance. Keep this manual for future reference.
Image: The Butterfly ZieraChrome Mixer Grinder unit with its various jars, including a blender jar, on a kitchen counter.
2. Important Safety Instructions
To reduce the risk of fire, electric shock, or injury, always follow these basic safety precautions:
- Read all instructions before using the appliance.
- Do not immerse the motor unit, cord, or plug in water or other liquids.
- Close supervision is necessary when any appliance is used by or near children.
- Unplug from the outlet when not in use, before assembling or disassembling parts, and before cleaning.
- Avoid contact with moving parts.
- Do not operate any appliance with a damaged cord or plug, or after the appliance malfunctions or has been dropped or damaged in any manner. Contact customer support for assistance.
- The use of attachments not recommended or sold by the manufacturer may cause fire, electric shock, or injury.
- Do not use outdoors.
- Do not let the cord hang over the edge of a table or counter, or touch hot surfaces.
- Always ensure the lid is securely locked in place before operating the mixer grinder.
- Do not attempt to remove the jar until the blade has stopped completely.
- This appliance is equipped with an overload protection mechanism. If the motor stops due to overload, switch off the appliance, unplug it, and allow it to cool for a few minutes before restarting.
3. Product Components
Your Butterfly ZieraChrome Mixer Grinder (ZC 5 Jars) package includes the following:
- 1 Motor unit
- 5 Jars (various sizes and types, including a juicer/blender jar)
- 1 Warranty Card
Image: An exploded view illustrating the key components: the Tornado Inverted Lid, Tornado Blades, and the TorX 21 750W Motor.
4. Setup and Initial Use
- Unpack: Carefully remove all components from the packaging. Retain packaging for future storage or transport.
- Inspect: Check for any damage during transit. Do not use if damaged.
- Clean: Before first use, wash all jars, lids, and blades with warm soapy water. Rinse thoroughly and dry. Wipe the motor unit with a damp cloth.
- Placement: Place the motor unit on a stable, flat, and dry surface, away from heat sources and water.
- Assemble Jar: Ensure the blade assembly is securely fitted into the jar. Place the gasket correctly on the lid before closing.
5. Operating Instructions
General Operation:
- Prepare Ingredients: Cut ingredients into small pieces to facilitate grinding and prevent overloading.
- Load Jar: Place the prepared ingredients into the appropriate jar. Do not overfill.
- Secure Lid: Place the lid firmly on the jar and ensure it is properly locked. The Tornado Lids are designed for enhanced grinding flow.
- Place Jar on Motor Unit: Position the jar onto the motor unit, aligning the grooves, and twist gently to lock it into place.
- Plug In: Connect the power cord to a suitable electrical outlet (230 Volts).
- Select Speed: Use the knob control to select the desired speed (3 speeds available). Start with a lower speed and gradually increase if needed.
- Grind: Allow the mixer grinder to operate until the desired consistency is achieved. Avoid continuous operation for extended periods to prevent overheating.
- Switch Off: Once grinding is complete, turn the knob to the 'OFF' position and unplug the appliance.
- Remove Jar: Wait for the blades to stop completely before unlocking and removing the jar from the motor unit.
Using Different Jars:
Image: Visual representation of various jars designed for specific grinding tasks, including superfine, coarse, and pepper grinding.
- Small Jars: Ideal for grinding small quantities of spices, chutneys, and pastes.
- Medium Jars: Suitable for larger quantities of spices, batters, and purees.
- Juicer/Blender Jar: Use for making juices, smoothies, and milkshakes. Ensure sufficient liquid is added for blending.
6. Maintenance and Cleaning
Cleaning Jars and Blades:
- After each use, immediately rinse the jars and blades to prevent food from drying on them.
- Wash with warm soapy water using a soft brush or sponge. Be cautious around the sharp blades.
- Rinse thoroughly and dry completely before storing.
- For stubborn stains or odors, a mixture of baking soda and water can be used.
Cleaning Motor Unit:
- Ensure the motor unit is unplugged before cleaning.
- Wipe the exterior of the motor unit with a soft, damp cloth. Do not use abrasive cleaners or immerse in water.
- Dry thoroughly with a soft, dry cloth.
Fixing Jar Gaskets:
Image: A specially annealed steel jar demonstrating its 550 GU mirror finish, highlighting its durable and hygienic construction.
Image: A visual guide demonstrating the correct way to place a jar gasket for a secure seal, and an incorrect placement.
If you experience leakage, ensure the gasket is properly seated in the lid. Refer to the visual guide for correct placement. Replace worn-out gaskets promptly to prevent leakage.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Motor does not start | Not plugged in; Power outage; Overload protection activated; Jar not properly locked. | Check power connection; Check household fuse/breaker; Switch off, unplug, wait 2-3 minutes, then restart; Ensure jar is securely locked onto the motor unit. |
| Leakage from jar | Lid not properly closed; Gasket not seated correctly or damaged; Jar overfilled. | Ensure lid is firmly closed; Check and reposition gasket, replace if damaged; Do not fill jar beyond maximum level. |
| Poor grinding performance | Insufficient liquid (for wet grinding); Ingredients too large; Blades are dull. | Add more liquid; Cut ingredients into smaller pieces; Contact customer support for blade replacement if necessary. |
| Burning smell or excessive noise | Overloading; Prolonged use; Motor issue. | Switch off immediately, unplug, and allow to cool; Reduce quantity of ingredients; If problem persists, contact customer support. |
8. Specifications
- Brand: Butterfly
- Model Name: Zeira (ZC 5 Jars)
- Model Number: M0989D00000
- Wattage: 750 Watts
- Voltage: 230 Volts
- Motor: Torx21 Motor (21,000 RPM)
- Number of Jars: 5
- Jar Material: Tempered & Specially Annealed Stainless Steel (SS304 Tornado Blades)
- Controls Type: Knob
- Number of Speeds: 3
- Product Dimensions (D x W x H): 58.5D x 29.5W x 27H Centimeters
- Item Weight: 4800 Grams
- Special Features: Adjustable Speed Control, Anti-Skid, Heavy Duty, Overload Protection, Rust Resistant
- Included Components: 1 Motor unit, 5 Jars, 1 Warranty Card
Image: An infographic summarizing key features such as the Torx21 motor, Tornado blades, 550 GU mirror finished jars, and warranty details.
9. Warranty and Support
Your Butterfly ZieraChrome Mixer Grinder comes with a comprehensive warranty:
- Product Warranty: 2 Years
- Motor Warranty: 5 Years
For warranty registration, access to the user manual, or any customer support needs, please use the following resources:
Image: A QR code for product warranty registration and access to the user manual, alongside contact details for customer support.
- Scan QR Code: Use your smartphone to scan the QR code in the image above to register your product and access the user manual online.
- Customer Support Phone: +91 9362 01 9362 (9 AM - 6 PM, Monday - Saturday)
- Email: service@butterflyindia.com
- Website: www.butterflyindia.com/service