1. Introduction
This manual provides comprehensive instructions for the safe installation, operation, and maintenance of your Brookstone Full Motion TV Mount, Model BKS-720-846. Please read this manual thoroughly before installation to ensure correct setup and to prevent damage or injury. Keep this manual for future reference.
2. Safety Information
WARNING: Failure to read and follow all instructions can result in personal injury, property damage, or voiding of your warranty. Improper installation may lead to the TV falling, causing serious injury.
- Ensure the mounting surface can safely support the combined weight of the mount and the TV.
- Do not exceed the maximum weight capacity of 77 lbs (35 kg).
- This mount is designed for installation on wood studs, solid concrete, or brick walls. Do not install on drywall alone.
- Use only the provided hardware. If any parts are missing or damaged, contact customer service.
- Always use a qualified technician for installation if you are unsure about any steps.
- Keep children and pets away during installation.
3. Package Contents
Verify that all components are present and undamaged before beginning installation. Refer to the included hardware bag for specific screw sizes and quantities.
Image 3.1: Overview of the Brookstone Full Motion TV Mount, showing the wall plate, articulating arm, and TV bracket assembly.
The package typically includes:
- Wall Plate Assembly
- TV Bracket Arms (2 pieces)
- Mounting Hardware Kit (various screws, washers, anchors)
- Instruction Manual
4. Specifications
| Model Number | BKS-720-846 |
| TV Size Compatibility | 36" - 85" Flat and Curved TVs |
| Weight Capacity | Up to 77 lbs (35 kg) |
| VESA Compatibility | 100x100mm to 400x400mm |
| Tilt Adjustment | +/- 15 degrees |
| Swivel Adjustment | 180 degrees (depending on TV size) |
| Extension from Wall | Up to 16 inches |
| Retraction to Wall | 2.5 inches |
| Material | High-quality Steel |
| UPC | 850060744662 |
5. Setup (Installation)
Before you begin, ensure you have the necessary tools: pencil, stud finder, drill, level, tape measure, and a Phillips head screwdriver.
5.1 Pre-Installation Checklist
- Confirm your TV's weight and VESA pattern are within the mount's specifications.
- Identify the type of wall you are mounting to (wood stud, concrete, or brick).
- Determine the desired height and position for your TV.
5.2 Attaching TV Brackets to TV
- Carefully place your TV face down on a soft, clean surface.
- Identify the VESA mounting holes on the back of your TV.
- Select the appropriate screws, washers, and spacers from the hardware kit that fit your TV's mounting holes.
- Attach the two TV bracket arms to the back of your TV, ensuring they are level and securely fastened. Do not overtighten.
5.3 Mounting the Wall Plate
- For Wood Studs: Use a stud finder to locate the center of two adjacent wood studs. Mark the drill holes for the wall plate. Drill pilot holes.
- For Concrete/Brick Walls: Mark the drill holes. Drill pilot holes using a masonry drill bit. Insert concrete anchors into the holes.
- Position the wall plate over the drilled holes and secure it using the appropriate lag bolts and washers. Use a level to ensure the wall plate is perfectly horizontal before fully tightening.
Image 5.1: The Brookstone Full Motion TV Mount securely installed on a wall, ready for TV attachment.
5.4 Attaching TV to Wall Plate
- With assistance, carefully lift the TV with the attached brackets.
- Hook the TV brackets onto the wall plate. Ensure both brackets are properly seated on the wall plate's rails.
- Secure the TV to the wall plate using the safety screws or locking mechanisms provided. This prevents accidental dislodgement.
Image 5.2: Side view of the mount, illustrating the articulating arm mechanism when extended from the wall.
6. Operating (Adjustments)
The Brookstone Full Motion TV Mount offers various adjustments for optimal viewing.
6.1 Tilt Adjustment
To adjust the vertical tilt of your TV (up to +/- 15 degrees), loosen the tilt adjustment knobs or bolts on the TV brackets. Adjust the TV to the desired angle and then securely tighten the knobs/bolts to lock the position.
Image 6.1: Illustration of the tilt adjustment feature, allowing the TV to be angled up or down for anti-glare or preferred viewing.
6.2 Swivel Adjustment
The articulating arm allows for 180-degree swivel. Gently push or pull the TV to the left or right to achieve your desired horizontal viewing angle. Ensure the arm moves smoothly and does not hit any obstructions.
6.3 Extension and Retraction
Extend the TV up to 16 inches from the wall or retract it to a low profile of 2.5 inches. Gently pull the TV forward to extend the arm, or push it back towards the wall to retract. The arm should move freely.
Image 6.2: Visual representation of the mount's ability to extend up to 14.1 inches and retract to 2.5 inches from the wall, offering maximum flexibility.
Image 6.3: The mount in its fully retracted position, demonstrating a low profile of 2.5 inches from the wall for space-saving.
6.4 Cable Management
Utilize the integrated cable management clips or channels on the mount's arm to route and secure TV cables. This helps maintain a tidy appearance and prevents cables from being pinched during adjustments.
7. Maintenance
- Cleaning: Wipe the mount with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Periodic Checks: Regularly inspect all screws and bolts to ensure they remain tight. Over time, vibrations or adjustments can cause fasteners to loosen.
- Lubrication: The articulating joints are designed for smooth operation. If movement becomes stiff, a small amount of silicone-based lubricant can be applied to the pivot points.
8. Troubleshooting
- TV is not level: Check the wall plate and TV brackets with a level. Adjust the wall plate if necessary, or use the fine-tuning leveling feature (if available on your specific model) on the TV brackets.
- Mount feels loose: Re-check all mounting bolts and screws for tightness. Ensure the wall studs or anchors are secure. Do not use the mount if it feels unstable.
- Difficulty adjusting TV: Ensure no cables are snagged. Check for any overtightened bolts on the articulating arm or tilt mechanism. Loosen slightly if needed, then re-tighten after adjustment.
- Missing parts: Refer to the package contents list. If parts are missing, contact Brookstone customer service.
9. Warranty and Support
For warranty information, please refer to the documentation included with your purchase or visit the official Brookstone website. If you require technical assistance or have questions regarding your Brookstone Full Motion TV Mount, please contact Brookstone customer service.
