Legrand 099403

Download PDF
Contents

Legrand Illuminated Toggle Switch with Mosaic LED Indicator

Model: 099403 | Brand: Legrand

Introduction

This manual provides comprehensive instructions for the installation, operation, and maintenance of your Legrand Illuminated Toggle Switch with Mosaic LED Indicator, Model 099403. This device is designed for electrical installations, functioning as a single or two-way switch with an integrated LED indicator for lighting or control functions. Please read these instructions carefully before installation and use to ensure safe and correct operation.

Safety Information

  • Installation must be performed by a qualified electrician in accordance with all local and national electrical codes.
  • Always disconnect power at the main circuit breaker before performing any electrical work.
  • Ensure all connections are secure to prevent electrical hazards.
  • Do not exceed the specified electrical ratings of the switch (10 A).
  • This product is designed for indoor use only.

Package Contents

Verify that all components are present before beginning installation:

  • 1 x Legrand Illuminated Toggle Switch Module (Model 099403)
Legrand Mosaic LED Toggle Switch in its retail packaging, front view.

Image: Front view of the Legrand Mosaic LED Toggle Switch in its retail packaging. The packaging clearly displays the Legrand logo and product name "MOSAIC™ EASY-LED INTERRUPTEUR OU VA-ET-VIENT LUMINEUX".

Setup and Installation

Follow these steps for proper installation of the Legrand Illuminated Toggle Switch:

  1. Prepare the Installation Area:

    Ensure power to the circuit is turned off at the main circuit breaker. Use a voltage tester to confirm that the power is off before proceeding.

  2. Mounting:

    The switch module is designed for flush mounting. A back box with a minimum depth of 40mm is recommended. The module dimensions are 45 x 45 x 24 mm (W x H x D).

    Front view of the Legrand Mosaic LED Toggle Switch module.

    Image: Front view of the Legrand Mosaic LED Toggle Switch module. This shows the clean white face of the switch, ready for integration into a wall plate.

    Side view of the Legrand Mosaic LED Toggle Switch module, showing connection points.

    Image: Side view of the Legrand Mosaic LED Toggle Switch module. This perspective highlights the compact design and the automatic terminal connection points on the sides.

  3. Wiring Connections:

    The switch features tool-free quick connection via automatic terminals. It supports a connection capacity of 2 x 2.5 mm² wires.

    • For Indicator Light Function (LED ON when load is OFF): Connect the neutral wire to the designated terminal on the switch. This configuration allows the LED to illuminate when the connected load (e.g., light) is off, acting as a locator.
    • For Classic Light Function (LED ON when load is ON): Two wires are sufficient. The LED will illuminate when the switch is in the ON position, indicating the load is active.

    Ensure all wires are fully inserted into the automatic terminals for a secure connection.

  4. Install Cover Plate:

    Once wiring is complete and secure, install the appropriate cover plate (not included) over the switch module. Ensure it is properly aligned and fastened.

  5. Restore Power:

    Once installation is complete and all components are securely in place, restore power at the main circuit breaker.

Operating Instructions

The Legrand Illuminated Toggle Switch operates like a standard electrical switch with the added functionality of an integrated LED indicator.

  • Toggle Operation: Press the top or bottom of the switch to toggle the connected electrical load (e.g., lights, appliances) ON or OFF.
  • LED Indicator: The integrated Mosaic LED indicator will illuminate or extinguish based on its wiring configuration (as described in the Setup section).
    • If wired for indicator light function, the LED will be ON when the load is OFF.
    • If wired for classic light function, the LED will be ON when the load is ON.

Maintenance

The Legrand Illuminated Toggle Switch requires minimal maintenance.

  • Cleaning: To clean the switch, gently wipe the surface with a soft, damp cloth. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish or internal components.
  • Inspection: Periodically inspect the switch for any signs of damage, loose connections, or unusual operation. If any issues are observed, disconnect power and consult a qualified electrician.

Troubleshooting

If you encounter issues with your Legrand Illuminated Toggle Switch, refer to the following common problems and solutions:

ProblemPossible CauseSolution
Switch does not operate the load.No power to the circuit; loose wiring connection; faulty switch.Check circuit breaker. Verify wiring connections are secure (power off). If problem persists, consult a qualified electrician.
LED indicator does not light up.Incorrect wiring for LED function; faulty LED.Review wiring instructions for the desired LED function (power off). If wired correctly and still no light, the LED may be faulty; consult a qualified electrician.
LED indicator lights up at the wrong time.Incorrect wiring for desired LED function.Review wiring instructions for the desired LED function (power off). Ensure neutral connection is correct for indicator light function.

For issues not listed above or if troubleshooting steps do not resolve the problem, contact a qualified electrician or Legrand customer support.

Specifications

FeatureDetail
Model Number099403
BrandLegrand
TypeIlluminated Toggle Switch with Mosaic LED Indicator
Current Rating10 A
Modules2 Modules
ColorWhite
MaterialPlastic
Connection TypeAutomatic Terminals (Tool-free)
Connection Capacity2 x 2.5 mm²
Product Dimensions (W x H x D)45 x 45 x 24 mm (1.77 x 1.77 x 0.94 inches approx.)
Item Weight1.02 ounces (approx. 29 grams)
IP RatingIP31D (Protection against solid objects >2.5mm, protected against vertically falling drops of water)
IK RatingIK04 (Protection against 0.5 joules impact)

Warranty Information

Specific warranty details for the Legrand Illuminated Toggle Switch (Model 099403) may vary by region and retailer. Please retain your proof of purchase and refer to the warranty documentation provided at the time of purchase. For detailed warranty terms and conditions, please visit the official Legrand website or contact your local Legrand distributor.

Customer Support

For technical assistance, product inquiries, or support, please contact Legrand customer service through their official website or the contact information provided with your product documentation. When contacting support, please have your product model number (099403) and purchase details readily available.

You can find more information and contact details on the official Legrand website: www.legrand.com

© 2025 Legrand. All rights reserved. Information in this manual is subject to change without notice.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.