1. Introduction
Thank you for choosing the Qieryun Heated Blanket Electric Throw. This manual provides essential information for the safe and effective use of your new heated blanket. Crafted from premium 220gsm flannel and 200gsm sherpa, this blanket offers exceptional softness and warmth. It features 10 adjustable heat levels, an 8-hour auto-off timer, and is designed for easy maintenance with machine washability.
2. Safety Information
- Overheat Protection: The blanket is equipped with an overheat protection system that automatically shuts off the unit if it becomes too hot, ensuring user safety.
- Do not use the electric blanket when it is tumbled drying or drying in the sun.
- Always ensure the controller cord is fully detached before washing.
- Do not plug in the blanket until it is completely dry after washing.
- Avoid folding or bunching the blanket tightly while in use to prevent heat concentration.
- Keep pets away from the blanket to prevent damage to the heating elements.
3. Setup
- Connect the Controller: Locate the connector on the blanket and the corresponding plug on the controller cord. Securely attach the controller to the blanket. Ensure a firm connection to prevent malfunction.
- Plug into Power: Insert the power cord plug into a standard electrical wall outlet.
Setup Video
4. Operating Instructions
The heated blanket features a simple controller for adjusting settings.
- Power On/Off: Press the power button on the controller to turn the blanket on or off.
- Adjust Heat Levels: Use the temperature adjustment button to cycle through 10 heat levels. The temperature range is approximately 86-142°F.
- Set Auto-Off Timer: Press the timer button to select an automatic shut-off time of 1, 2, 4, 6, or 8 hours. This feature helps conserve energy and ensures safety.
5. Maintenance
Proper care ensures the longevity and performance of your heated blanket.
- Detach Controller: Always disconnect the controller cord from the blanket before washing.
- Machine Wash: Place the blanket in a washing machine on a gentle cycle using cold water.
- Drying: For best results, air-dry the blanket. If using a dryer, select a low-temperature setting. Do not plug in or use the blanket until it is completely dry. Avoid dry cleaning and ironing.
6. Specifications
| Feature | Detail |
|---|---|
| Material | Flannel (220gsm) + Sherpa (200gsm) |
| Size | Throw (50" x 60") |
| Heat Levels | 10 |
| Temperature Range | 86-142°F |
| Auto-Off Timer | 8 hours (adjustable to 1, 2, 4, 6 hours) |
| Safety Feature | Overheat Protection |
| Care Instructions | Machine Washable (detach cord) |
| Item Weight | 3.01 pounds (1.37 Kilograms) |
| Manufacturer | Qieryun |
7. Troubleshooting
- Blanket Not Heating: Ensure the power cord is securely plugged into a working outlet and the controller is firmly connected to the blanket. Check if the power button on the controller is pressed.
- Error Code Displayed: If an error code appears on the controller, unplug the blanket from the wall outlet, disconnect the controller from the blanket, wait for a few minutes, then reconnect and plug it back in. If the error persists, contact customer support.
- Uneven Heating: Ensure the blanket is spread out evenly and not folded or bunched during use.
8. Warranty and Support
For warranty information, product support, or any inquiries not covered in this manual, please refer to the product packaging or contact Qieryun customer service directly. Keep your purchase receipt for warranty claims.
