Introduction
Thank you for choosing the SUPERJARE 2 Drawer Night Stand with Charger Station. This manual provides essential information for the safe assembly, operation, and maintenance of your new nightstand. Designed for convenience and style, this nightstand features integrated charging capabilities and ample storage to enhance your living space.
Image: The SUPERJARE 2 Drawer Night Stand, showcasing its design and placement in a living area.
Safety Information
- Read all instructions carefully before assembly and use.
- Keep small parts away from children during assembly to prevent choking hazards.
- Ensure all connections for the charging station are secure and properly installed before plugging into a power source.
- Do not overload the electrical outlets. Refer to the specifications for maximum load.
- Place the nightstand on a flat, stable surface to prevent tipping.
- Do not stand or climb on the nightstand.
- Avoid exposing the nightstand to excessive moisture or direct sunlight.
Package Contents
Before beginning assembly, verify that all parts listed below are present and undamaged. If any parts are missing or damaged, please contact customer support.
- Top Panel with Integrated Charging Station
- Side Panels (Left & Right)
- Bottom Panel
- Back Panel
- Shelf Panel
- Drawer Front with Rattan Decor
- Drawer Side Panels
- Drawer Bottom Panel
- Solid Wood Legs (4x)
- Hardware Pack (screws, dowels, cam locks, drawer slides, handle)
- Power Cord (pre-attached to charging station)
- Instruction Manual
Assembly Instructions
Assembly is designed to be straightforward. Please follow these steps carefully. All pieces are labeled for easy identification.
- Prepare the Workspace: Clear a spacious area and lay out all components on a soft, clean surface to prevent scratches.
- Attach Legs: Secure the four solid wood legs to the bottom panel using the provided screws. Ensure they are tightened firmly.
- Assemble Frame: Connect the side panels to the bottom panel and then attach the shelf panel and top panel. Use cam locks and dowels as indicated in the diagrams.
- Install Back Panel: Slide or screw the back panel into place, ensuring the cable management hole aligns with the charging unit.
- Assemble Drawer: Construct the drawer box using the drawer side panels and bottom panel. Attach the rattan decor drawer front and the drawer handle.
- Install Drawer: Mount the drawer slides to the nightstand frame and the drawer box. Carefully insert the assembled drawer into the nightstand.
- Connect Power: Route the power cord from the integrated charging station through the cable management hole at the back of the nightstand.
Image: Detailed diagram illustrating the dimensions and individual parts for assembly.
Operating Instructions
Your nightstand is equipped with a convenient charging station to power your devices.
- Power Connection: Plug the nightstand's main power cord into a standard wall outlet.
- Using AC Outlets: The top surface features two standard AC outlets (125V/12A). Plug in lamps, alarm clocks, or other small appliances.
- Using USB Ports: Utilize the integrated USB (5V/2A) and Type-C (5V/2A) ports to charge your smartphones, tablets, smartwatches, and other compatible USB-powered devices.
- Cable Management: Use the cable management hole at the back of the nightstand to keep cords tidy and out of sight.
Image: A close-up view of the charging station, highlighting its various ports and functionality.
Maintenance
To ensure the longevity and appearance of your SUPERJARE nightstand, follow these maintenance guidelines:
- Cleaning: Wipe surfaces with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners that may damage the finish.
- Spills: Immediately wipe up any spills to prevent staining or water damage.
- Rattan Care: Gently dust the synthetic rattan with a soft brush or cloth. Avoid excessive moisture.
- Electrical Components: Periodically check the power cord and plugs for any signs of wear or damage. Disconnect from power before cleaning the charging station.
- Tighten Hardware: Occasionally check and tighten all screws and fasteners to maintain stability.
Troubleshooting
If you encounter any issues with your nightstand, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Charging station not working | Not plugged in; circuit breaker tripped; damaged cord/unit. | Ensure power cord is fully plugged into a working outlet. Check household circuit breaker. If damaged, discontinue use and contact support. |
| Drawer sticks or does not slide smoothly | Misaligned drawer slides; obstruction; loose hardware. | Check that drawer slides are correctly installed and aligned. Remove any obstructions. Tighten all drawer hardware. |
| Nightstand is wobbly | Uneven floor; loose leg connections; uneven assembly. | Ensure the nightstand is on a level surface. Tighten all leg screws. Recheck assembly steps to ensure all connections are secure. |
Specifications
| Feature | Detail |
|---|---|
| Brand | SUPERJARE |
| Model | B0F8H37V3R |
| Product Dimensions (D x W x H) | 11.8"D x 15.7"W x 25.2"H |
| Color | Walnut |
| Frame Material | Wood |
| Top Material Type | Engineered Wood |
| Material Type | Synthetic Rattan, Wood (Walnut, Solid Wood) |
| Number of Drawers | 2 |
| Number of Items | 2 |
| AC Outlets | 2 (125V / 12A) |
| USB Port | 1 (5V / 2A) |
| Type-C Port | 1 (5V / 2A) |
| Tools Recommended For Assembly | Screw Driver |
Warranty and Support
SUPERJARE products are manufactured with quality and care. For warranty information, product support, or to report missing/damaged parts, please refer to the contact information provided with your purchase or visit the official SUPERJARE website. Please retain your proof of purchase for any warranty claims.