InMotion Wireless Airline Transmitter

InMotion Wireless Airline Transmitter User Manual

Model: Wireless Airline Transmitter

1. Introduction

Thank you for choosing the InMotion Wireless Airline Transmitter. This device allows you to connect your wireless headphones to in-flight entertainment systems, gym consoles, or any audio source with a standard 3.5mm audio jack. Enjoy your audio content wirelessly with ease and convenience.

2. Safety Information

  • Do not expose the device to extreme temperatures, moisture, or corrosive environments.
  • Keep the device away from children and pets.
  • Use only the provided charging cable or a certified equivalent.
  • Do not attempt to disassemble or modify the device. This will void the warranty.
  • Dispose of the device responsibly according to local regulations.

3. Package Contents

Please verify that all items are present in your package:

  • InMotion Wireless Airline Transmitter
  • USB Charging Cable
  • User Manual
InMotion Wireless Airline Transmitter with 3.5mm jack

Figure 3.1: The InMotion Wireless Airline Transmitter, featuring a compact black body with a 3.5mm audio jack and a power indicator light.

4. Product Overview

Familiarize yourself with the components of your InMotion Wireless Airline Transmitter.

InMotion Wireless Transmitter packaging showing product and features

Figure 4.1: Product packaging highlighting the wireless transmitter, its 3.5mm plug, and the ability to connect to in-flight entertainment or gym consoles.

  • 3.5mm Audio Plug: Connects to audio output sources.
  • Power/Pairing Button: Used to turn the device on/off and initiate Bluetooth pairing.
  • LED Indicator: Displays power status, charging status, and pairing mode.
  • USB Charging Port: For recharging the internal battery.

5. Setup and Pairing

Follow these steps to set up and pair your transmitter with your wireless headphones.

5.1. Charging the Transmitter

  1. Connect the small end of the USB charging cable to the transmitter's charging port.
  2. Connect the large end of the USB cable to a USB power source (e.g., computer, wall adapter).
  3. The LED indicator will illuminate during charging and turn off when fully charged.

5.2. Pairing with Wireless Headphones

  1. Ensure your wireless headphones are in pairing mode. Refer to your headphone's manual for specific instructions.
  2. Press and hold the Power/Pairing button on the InMotion Transmitter until the LED indicator flashes rapidly (e.g., blue and red alternately), indicating it is in pairing mode.
  3. Place the transmitter and headphones close to each other.
  4. Once successfully paired, the LED indicator on the transmitter will change to a steady light or flash slowly, depending on the model.

6. Operation

After successful pairing, you can begin using your InMotion Wireless Airline Transmitter.

Person wearing headphones on an airplane, illustrating connectivity

Figure 6.1: The transmitter enables wireless audio connectivity for users in various settings, such as during air travel.

  1. Plug the 3.5mm audio plug of the transmitter into the audio output jack of your desired source (e.g., airplane seat, gym equipment).
  2. Ensure your paired wireless headphones are powered on and connected to the transmitter.
  3. Adjust the volume on your headphones or the audio source as needed.
  4. To turn off the transmitter, press and hold the Power/Pairing button until the LED indicator turns off.

7. Maintenance

To ensure the longevity and optimal performance of your transmitter, follow these maintenance guidelines:

  • Clean the device with a soft, dry cloth. Do not use harsh chemicals or abrasive materials.
  • Store the transmitter in a cool, dry place when not in use.
  • Avoid bending or stressing the 3.5mm audio plug excessively.

8. Troubleshooting

If you encounter issues with your InMotion Wireless Airline Transmitter, refer to the following solutions:

  • No Power: Ensure the transmitter is fully charged. Connect it to a power source using the USB cable.
  • Cannot Pair: Make sure both the transmitter and your headphones are in pairing mode and are within close proximity. Turn both devices off and on again, then attempt pairing.
  • No Audio: Check if the 3.5mm plug is fully inserted into the audio source. Verify that the volume on both the audio source and your headphones is turned up. Ensure the transmitter is successfully paired with your headphones.
  • Poor Audio Quality: Move closer to the transmitter to reduce interference. Ensure there are no obstructions between the transmitter and your headphones.

9. Specifications

FeatureDetail
BrandInMotion
ModelWireless Airline Transmitter
ConnectivityWireless (Bluetooth), 3.5mm Audio Jack
Compatible DevicesWireless Headphones
ColorBlack
Item Weight1.58 ounces
Package Dimensions6.97 x 2.36 x 0.79 inches

10. Warranty and Support

The InMotion Wireless Airline Transmitter comes with a standard manufacturer's warranty. For specific warranty details, please refer to the warranty card included in your product packaging or contact InMotion customer support.

For technical support, troubleshooting assistance, or general inquiries, please visit the official InMotion website or contact their customer service department. Contact information can typically be found on the product packaging or the brand's official online presence.

Related Documents - Wireless Airline Transmitter

Preview Electro-Chemical Devices T80 Universal Transmitter Instruction Manual
This instruction manual from Electro-Chemical Devices (ECD) details the Model T80 Universal Transmitter, an industrial instrument for continuous analytical measurements. It covers installation, operation, calibration, and maintenance for parameters like pH, ORP, conductivity, and more.
Preview Dräger X-plore 9300 Airline Belt Manifold: Instructions for Use
Comprehensive instructions for the Dräger X-plore 9300 airline belt manifold, covering safety, product overview, intended use, preparation, during use, troubleshooting, maintenance, and technical data for respiratory protection.
Preview KitSound KSBTAP Bluetooth Airline Adaptor User Manual
Comprehensive user manual for the KitSound KSBTAP Bluetooth Airline Adaptor. Learn how to pair, charge, and use this portable transmitter for inflight entertainment with your wireless headphones. Includes specifications and compliance information.
Preview ABB AWT210 2-Wire Conductivity, pH/ORP, pION Transmitter - Commissioning Instruction
This document provides commissioning instructions for the ABB AWT210 2-wire transmitter, covering installation, operation, specifications, safety, hazardous area considerations, and maintenance for conductivity, pH, ORP, and pION measurements.
Preview KIMO Si-CPE320 Multifunction Panel Transmitter User Manual
User manual for the KIMO Si-CPE320 Multifunction Panel Transmitter, providing detailed information on safety, features, installation, configuration, Modbus communication, and maintenance for HVACR applications.
Preview Sauermann Si-CPE320 Quick Start Guide
This document provides basic handling instructions for the Sauermann Si-CPE320 transmitter. It covers device description, operating temperature, protection, storage, mounting, connections, first start-up, probe connection/disconnection, channel setup, output setup, maintenance, and precautions for use. The guide is available in multiple languages.