1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your Barrina 4FT LED Shop Light, Model BDL45. This product is designed to provide efficient and bright illumination for various indoor environments such as workshops, garages, basements, and offices. Please read this manual thoroughly before installation and use to ensure safe and proper operation.
Image: Barrina 4FT LED Shop Lights providing bright illumination in a garage setting.
2. Safety Information
Always follow basic safety precautions when installing and operating electrical equipment to reduce the risk of fire, electric shock, and personal injury.
- Disconnect power before installation or servicing.
- Ensure the power supply voltage matches the product's requirements (120V AC).
- Do not install near heat sources or in wet locations. This product is for indoor use only.
- Handle with care to avoid damage to the light fixture.
- Consult a qualified electrician if you are unsure about any part of the installation process.
3. What's in the Box
Verify that all components are present before beginning installation:
- LED Shop Lights 4FT (Quantity: 2)
- Accessories Packages (Mounting clips, screws, anchors)
- 48" GM Connecting Cord (Quantity: 1)
- 59" Power Cord with On/Off Switch (Quantity: 2)
- 20" Hardwire Connector (Quantity: 2)
Image: Contents of the Barrina 4FT LED Shop Light package.
4. Specifications
| Feature | Detail |
|---|---|
| Model Number | BDL45 |
| Power | 45 Watts |
| Brightness | 5000 Lumens |
| Color Temperature | 5000K Daylight White |
| Product Dimensions | 52"L x 4.33"W x 3.54"H |
| Material | Polycarbonate |
| Installation Type | Ceiling Mount / Flush Mount |
| Voltage | 120 Volts (AC) |
| Indoor/Outdoor Usage | Indoor Use Only |
| Special Features | Hidden Wiring Design, Linkable, Frosted Cover, On/Off Switch |
5. Setup and Installation
The Barrina LED Shop Lights offer flexible installation options. Ensure power is disconnected before proceeding.
5.1. Mounting the Fixture
- Marking: Determine the desired location for your light fixture. Mark the positions for the mounting clips on the ceiling.
- Drilling: Use a 0.24" drill bit to drill holes at the marked positions. Insert the provided screw anchors into the holes.
- Attaching Clips: Secure the mounting clips to the ceiling using the screws.
- Mounting Light: Align the light fixture with the clips and snap it into place.
Image: Steps for ceiling mounting the LED shop light using clips.
5.2. Power Connection Options
The light fixtures can be powered using the provided power cord or hardwired for a seamless appearance.
5.2.1. Using the 59" Power Cord
- Ensure the power source is off.
- Connect the female end of the 59" power cord to the male input port on the light fixture.
- Plug the power cord into a standard 120V AC outlet. The power cord includes an integrated On/Off switch for convenience.
Image: Power cord connection and hardwire option.
5.2.2. Hardwire Connection (20" Hardwire Connector)
- Ensure the power source is off at the circuit breaker.
- Connect the hardwire connector to the light fixture's input port.
- Identify the live (black) and neutral (white) wires from your ceiling's electrical box.
- Connect the black wire from the hardwire connector to the live wire from the ceiling using a wire nut. Secure with electrical tape.
- Connect the white wire from the hardwire connector to the neutral wire from the ceiling using a wire nut. Secure with electrical tape.
- Tuck excess wires neatly into the fixture's hidden wiring groove for a seamless ceiling fit.
Image: Concealed wiring design for a clean installation.
5.3. Linkable Connection (48" GM Connecting Cord)
You can link up to 4 Barrina 4FT LED Shop Lights in series using the provided 48" GM connecting cord.
- Ensure power is off to all fixtures.
- Connect the male end of the connecting cord to the female output port of the first fixture.
- Connect the female end of the connecting cord to the male input port of the next fixture.
- Repeat for additional fixtures, up to a maximum of 4 lights.
- Conceal any excess connecting cord in the hidden wiring groove of the fixtures.
Image: Linkable connection method for multiple fixtures.
5.4. Installation Video Guide
For a visual guide on installation and features, please watch the official product video below:
Video: Barrina 4FT LED Shop Light 45W - Installation and Features Overview. This video demonstrates the product's features, installation steps, and various connection methods.
6. Operating Instructions
Once installed, operating your Barrina LED Shop Light is straightforward.
- Power On/Off: If using the 59" power cord, use the integrated On/Off switch to control the light. For hardwired installations, control the light via the wall switch connected to the circuit.
- Individual Control (Linkable Setup): In a linkable setup, each fixture connected with a 59" power cord can be individually controlled using its respective On/Off switch.
- Light Quality: The 5000K Daylight White light provides a bright, uniform illumination suitable for detailed work and general area lighting. The frosted cover ensures soft light without flicker or spots.
Image: 5000K Daylight White light in a laundry room setting.
7. Maintenance
Minimal maintenance is required to keep your Barrina LED Shop Light in optimal condition.
- Cleaning: Ensure the power is off before cleaning. Wipe the fixture with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Inspection: Periodically check for any loose connections or visible damage. If any damage is found, discontinue use and contact customer support.
- Bulb Replacement: The LED bulbs are integrated and not user-replaceable. The fixture is designed for long-lasting performance.
8. Troubleshooting
Refer to the table below for common issues and their solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on | No power supply; Loose connection; Faulty switch | Check power outlet/circuit breaker; Ensure all connections are secure; Test the switch. |
| Light flickers | Unstable power supply; Loose wiring; Incompatible dimmer (product is not dimmable) | Check power source stability; Secure all wiring connections; Ensure no dimmer is used. |
| Lights in a linked series do not all turn on | Faulty connecting cord; Loose connection in series | Check the connecting cord; Ensure all linked connections are firm. |
If the problem persists after attempting these solutions, please contact Barrina customer support.
9. Warranty and Support
Barrina products are manufactured to high-quality standards and are backed by a limited warranty. For specific warranty details and duration, please refer to the product packaging or contact Barrina customer service.
For technical support, troubleshooting assistance, or warranty claims, please visit the official Barrina website or contact their customer service department. Contact information can typically be found on the product packaging or the brand's official website.
Online Support: Visit the Barrina Store on Amazon