Vanzon V40 Bluetooth Speaker User Manual

1. Introduction

Thank you for choosing the Vanzon V40 Portable Bluetooth Speaker. This manual provides essential information for setting up, operating, and maintaining your speaker. Please read it thoroughly before use to ensure optimal performance and longevity of your device.

The Vanzon V40 is designed for high-quality audio, offering 24W stereo sound, IPX7 waterproofing, and TWS dual pairing capabilities for an enhanced listening experience both indoors and outdoors.

Image 1.1: Vanzon V40 Bluetooth Speaker showcasing its IPX7 waterproof design.

2. Package Contents

Please check the package for the following items:

• Vanzon V40 Portable Bluetooth Speaker
• USB-C Charging Cable
• Aux-in Audio Cable
• User Manual

3. Product Overview

Familiarize yourself with the speaker's buttons and ports for easy operation.

Image 3.1: Vanzon V40 Speaker with labeled controls and ports.

Controls and Ports:

• Power Button: Press and hold to power on/off. Short press to control RGB lights.
• Mode Button: Short press to switch between Bluetooth, TF Card, and Aux-in modes.
• Play/Pause Button: Short press to play or pause music.
• Volume Down (-): Short press to decrease volume. Press and hold for previous track.
• Volume Up (+): Short press to increase volume. Press and hold for next track.
• Charging Interface (USB-C): For charging the speaker.
• TF Card Port: Insert a Micro SD card for direct music playback.
• Aux-in Port: Connect external audio devices via 3.5mm audio cable.
• Rhythmic RGB Light Show: Integrated LED lights that sync with music.

4. Setup

4.1 Charging the Speaker

1. Connect the provided USB-C charging cable to the speaker's charging port.
2. Connect the other end of the cable to a USB power adapter (not included) or a computer's USB port.
3. The charging indicator light will illuminate. Once fully charged, the light will change or turn off depending on the model.
4. A full charge provides approximately 24 hours of playtime at 50% volume.

4.2 Power On/Off

• To Power On: Press and hold the Power button for 2-3 seconds until you hear an audible prompt and the indicator light turns on.
• To Power Off: Press and hold the Power button for 2-3 seconds until you hear an audible prompt and the indicator light turns off.

4.3 Bluetooth Pairing

The Vanzon V40 uses Bluetooth 5.0 for stable connections up to 66 feet.

Image 4.1: Vanzon V40 Speaker demonstrating Bluetooth 5.0 connectivity.

1. Ensure the speaker is powered on and in Bluetooth pairing mode (indicator light will flash blue). If not, short press the Mode button to switch to Bluetooth mode.
2. On your device (smartphone, tablet, computer), enable Bluetooth and search for available devices.
3. Select "Vanzon V40" from the list of devices.
4. Once connected, you will hear a confirmation sound, and the indicator light will turn solid blue.

4.4 TWS (True Wireless Stereo) Dual Pairing

Connect two Vanzon V40 speakers for a true stereo sound experience.

Image 4.2: Two Vanzon V40 Speakers paired for TWS mode, providing expanded sound.

1. Ensure both Vanzon V40 speakers are powered on and not connected to any Bluetooth device.
2. On one speaker (this will be the primary speaker), double-press the Play/Pause button. You will hear a prompt indicating it's searching for another speaker.
3. The two speakers will automatically connect to each other. You will hear a confirmation sound once TWS pairing is successful.
4. Now, connect your device to the primary speaker via Bluetooth as described in section 4.3. Both speakers will play audio simultaneously.

5. Operating Instructions

5.1 Basic Music Controls

• Play/Pause: Short press the Play/Pause button.
• Volume Up: Short press the '+' button.
• Volume Down: Short press the '-' button.
• Next Track: Press and hold the '+' button.
• Previous Track: Press and hold the '-' button.

5.2 Mode Switching

Short press the Mode button to cycle through available input modes:

• Bluetooth Mode: For wireless connection to your device.
• TF Card Mode: For playing music directly from a Micro SD card.
• Aux-in Mode: For wired connection to external audio sources using a 3.5mm audio cable.

5.3 RGB Light Control

The Vanzon V40 features rhythmic RGB lights. Short press the Power button to cycle through different light modes or turn the lights off.

6. Maintenance

• Cleaning: Wipe the speaker with a soft, damp cloth. Do not use harsh chemicals or abrasive cleaners.
• Water Exposure: While IPX7 waterproof, avoid prolonged submersion. Ensure charging port cover is securely closed before exposure to water.
• Storage: Store the speaker in a cool, dry place away from direct sunlight and extreme temperatures.
• Battery Care: To prolong battery life, fully charge the speaker before first use and recharge it at least once every three months if not used regularly.

7. Troubleshooting

8. Specifications

Image 8.1: Vanzon V40 Speaker highlighting its 24W stereo sound output.

• Brand: Vanzon
• Model: V40
• Connectivity Technology: Bluetooth 5.0
• Speaker Maximum Output Power: 24 Watts
• Audio Output Mode: Stereo
• Frequency Response: 18 KHz
• Waterproof Rating: IPX7
• Playtime: Up to 24 hours (at 50% volume)
• Features: TWS Dual Pairing, Rhythmic RGB Light Show, TF Card Support, Aux-in

9. Warranty and Support

The Vanzon V40 Bluetooth Speaker comes with a standard manufacturer's warranty. For specific warranty details, please refer to the warranty card included in your package or contact the seller directly.

If you encounter any issues not covered in this manual or require further assistance, please contact Vanzon customer support or the retailer from whom you purchased the product. You may also visit the Vanzon Store on Amazon for more information.