1. Important Safety Instructions
Please read all instructions carefully before using the KHROOLT Electric Kettle. Failure to follow these instructions may result in electric shock, fire, or serious injury.
- Do not put your hand inside the steam hole when the product is running.
- Check the power cord and plug for damage or wear before each use to avoid short-circuit or leakage risks.
- Avoid placing the kettle near flammable or explosive materials.
- Ensure sufficient distance between the kettle and the power outlet.
- This appliance is for household use only. Do not use outdoors.
- Do not immerse the kettle, power cord, or plug in water or other liquids.
- Always ensure the lid is securely closed during operation.
- Keep out of reach of children.
2. Product Overview
The KHROOLT 4L Stainless Steel Electric Kettle is designed for efficient water heating and temperature maintenance. It features a 4-liter capacity, 750W rapid boiling, and a 35W keep-warm function at 95°C/203°F. The kettle offers three dispensing modes for convenience and incorporates a 6-layer safety system.
Image: The KHROOLT Electric Kettle with its handle raised, demonstrating its portability.
3. Components
The package includes the following items:
- 1x KHROOLT Electric Kettle
- 1x Power Cord
- 1x English Manual (this document)
4. Setup
4.1 Initial Cleaning
Before first use, clean the interior of the kettle. Fill the kettle with water, boil it, and then discard the water. Repeat this process 2-3 times to remove any manufacturing residues.
4.2 Filling with Water
Open the lid of the kettle and fill it with fresh water. Do not fill above the 'MAX' line indicated on the water level gauge. Ensure the lid is securely closed after filling.
Image: The electric kettle with its lid open, revealing the stainless steel interior, ready for filling.
4.3 Connecting to Power
Connect the power cord to the kettle and then plug it into a standard 110V electrical outlet. Ensure the power switch on the kettle is in the 'ON' position.
5. Operating Instructions
5.1 Boiling Water
Once filled and connected to power, the kettle will automatically begin the boiling process. The 750W heating element will boil 4 liters of water in approximately 20 minutes. The heating indicator light will illuminate during this process.
5.2 Keep-Warm Function
After boiling, the kettle automatically switches to the keep-warm function, maintaining the water temperature at approximately 95°C/203°F with 35W power consumption. The warming indicator light will be illuminated. This function remains active as long as the kettle is plugged in.
5.3 Dispensing Water
The kettle offers three dispensing modes:
- Push Button Mode: Press the dispense button on the top panel to release water.
- Touch Mode: Gently touch the dispense area to activate water flow.
- Air Pressure Mode: Use the air pressure pump for manual dispensing, useful during power outages.
Image: The electric kettle dispensing hot water into a glass, demonstrating the dispensing function.
Image: A hand pressing the dispense button on the top panel of the kettle to release water.
Video: Demonstration of the hot water dispensing function of the electric kettle.
Video: Overview of the electric hot water dispenser features and operation.
6. Maintenance
6.1 Cleaning the Kettle
To clean the kettle, unplug it and allow it to cool completely. The housing material is stainless steel, and product care instructions specify hand wash. Do not use abrasive cleaners or scouring pads.
6.2 Descaling
Over time, mineral deposits (scale) may accumulate inside the kettle, especially in areas with hard water. To descale:
- Fill the kettle with a mixture of water and white vinegar (e.g., 1 part vinegar to 2 parts water) or a solution of baking soda and water.
- Boil the solution.
- Let it stand for at least 30 minutes, or longer for heavy scale.
- Pour out the solution and rinse the interior thoroughly with fresh water several times.
7. Troubleshooting
If you encounter issues with your KHROOLT Electric Kettle, please refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Kettle does not heat up. | Not plugged in, power switch off, or power outage. | Ensure the kettle is properly plugged into a working outlet and the power switch is ON. Check your home's circuit breaker. |
| Water not dispensing. | Dispense button not pressed correctly, or air pressure pump not engaged. | Press the dispense button firmly or engage the air pressure pump as described in Section 5.3. Ensure the kettle has power. |
| Water has an unusual taste. | New kettle residue or mineral buildup. | Perform initial cleaning steps (Section 4.1) or descale the kettle (Section 6.2). |
| Kettle leaks. | Lid not closed properly or overfilled. | Ensure the lid is securely closed. Do not fill above the MAX line. If leaking persists, contact customer support. |
8. Specifications
| Feature | Specification |
|---|---|
| Brand | KHROOLT |
| Model Name | Steel Electric Kettle |
| Item Model Number | 001 |
| Color | White |
| Housing Material | Stainless Steel |
| Liner Material | 304 Stainless Steel |
| Capacity | 4 Liters (135 oz) |
| Overall Capacity | 5.8 Liters (196 oz) |
| Rated Power | 750W |
| Heat Preservation Power | 35W |
| Rated Voltage | 110V |
| Boiling Water Time | Approx. 20 minutes (for 4L) |
| Constant Temperature | 95°C / 203°F |
| Water Dispensing Modes | 3 (Push Button, Touch, Air Pressure) |
| Product Dimensions (D*H) | 20*38cm / 7.87*15in |
| Power Cord Length | 1.2m / 3.94ft |
| UPC | 747495667119 |
9. Warranty and Support
For warranty information or technical support, please refer to the contact details provided at the point of purchase or visit the official KHROOLT website. Keep your purchase receipt as proof of purchase for any warranty claims.