Oyajia Modern Coffee Table with LED Lighting

1. Introduction

Thank you for choosing the Oyajia Modern Coffee Table with LED Lighting. This manual provides essential information for the safe assembly, operation, and maintenance of your new coffee table. Please read these instructions carefully before beginning assembly and retain them for future reference.

This modern coffee table features integrated LED lighting with 16 color options and 3 brightness settings, controllable via a remote. It includes two spacious drawers for convenient storage and is constructed from high-gloss 15mm particle board, designed to complement various living spaces.

2. Safety Information

• Caution: Please assemble carefully according to the instructions provided.
• Maximum Static Load Capacity: The total static load capacity for this coffee table is 80 kg. Do not exceed this weight limit to prevent damage or injury.
• Ensure all screws and fasteners are securely tightened before use. Periodically check and re-tighten as necessary.
• Keep small parts and packaging materials away from children to avoid choking hazards.
• Do not stand or sit on the coffee table.
• Place the table on a flat, stable surface to prevent tipping.

3. Package Contents

Before assembly, please verify that all components listed below are present and undamaged. If any parts are missing or damaged, please contact customer support.

• Table Top Panel
• Side Panels (x2)
• Bottom Panel
• Drawer Fronts (x2)
• Drawer Side/Back Panels (for 2 drawers)
• Drawer Bottoms (x2)
• Drawer Slides (sets for 2 drawers)
• LED Strip Light with Power Adapter
• Remote Control for LED Light
• Assembly Hardware (screws, dowels, cam locks, etc.)
• Assembly Instructions (this manual)

4. Setup and Assembly

Assembly typically requires two adults. Please follow these steps carefully. A Phillips head screwdriver and a hammer (not included) may be required.

1. Unpack and Identify Parts: Lay out all components on a clean, soft surface (e.g., a blanket or carpet) to prevent scratches. Identify each part using the provided hardware list.
2. Assemble the Main Frame: Attach the side panels to the bottom panel using the designated hardware (dowels, screws, cam locks). Ensure they are aligned correctly.
3. Install Drawer Slides: Secure the drawer slides to the inner sides of the main frame using the provided screws. Pay attention to the orientation of the slides (left/right, front/back).
4. Assemble Drawers: Construct each drawer by attaching the side and back panels to the drawer front. Insert the drawer bottom into the grooves. Secure with screws. Attach the remaining drawer slide components to the assembled drawers.
5. Insert Drawers: Carefully slide the assembled drawers into the main frame, aligning the drawer slides. Ensure they open and close smoothly.
6. Attach Table Top: Place the table top panel onto the assembled frame. Secure it using the appropriate hardware.
7. Install LED Lighting: Adhere the LED strip light to the designated area within the open compartment of the coffee table. Connect the LED strip to the power adapter and plug it into a standard electrical outlet.

Figure 4.1: Assembled coffee table with LED lighting and one drawer open. This image illustrates the overall structure and the illuminated compartment.

Figure 4.2: View of the coffee table with both drawers fully extended, demonstrating the ample storage capacity.

5. Operating Instructions

5.1 LED Lighting

The integrated LED lighting system is controlled by the included remote control.

• Power On/Off: Press the ON or OFF button on the remote to turn the LED lights on or off.
• Color Selection: Use the color buttons on the remote to choose from 16 different LED colors.
• Brightness Adjustment: Use the BRIGHTNESS UP and BRIGHTNESS DOWN buttons to cycle through 3 brightness settings.
• Mode Selection: The remote may include buttons for various lighting modes (e.g., flash, strobe, fade, smooth). Refer to the remote's specific markings for these functions.

Figure 5.1: The remote control for the LED lighting, illustrating the 16 available colors and brightness adjustment options.

5.2 Drawers

The two integrated drawers provide convenient storage for various items such as remote controls, magazines, or small household accessories. Gently pull the drawer fronts to open and push to close.

6. Maintenance

• Cleaning: Wipe the table surfaces with a soft, damp cloth. Avoid using harsh chemicals, abrasive cleaners, or polishes that may damage the high-gloss finish.
• Spills: Clean up spills immediately to prevent staining or damage to the material.
• LED Lights: The LED lights are designed for long-term use. If a light strip malfunctions, contact customer support for replacement options. Do not attempt to repair it yourself.
• Hardware: Periodically check all screws and fasteners to ensure they remain tight. Re-tighten if necessary to maintain stability.
• Placement: Avoid placing the table in direct sunlight or near heat sources, as this may cause discoloration or warping over time.

7. Troubleshooting

• LED Lights Not Turning On:
  • Ensure the power adapter is securely plugged into both the LED strip and a working electrical outlet.
  • Check if the remote control has fresh batteries and is pointed directly at the LED receiver.
  • Try unplugging and re-plugging the power adapter to reset the system.
• Drawers Not Opening/Closing Smoothly:
  • Check for any obstructions in the drawer slides.
  • Ensure the drawer slides are properly aligned and securely attached to both the drawer and the table frame.
  • Verify that the drawer assembly is square and not warped.
• Table Feels Unstable:
  • Ensure all assembly hardware (screws, cam locks) is fully tightened.
  • Verify the table is placed on a level surface. Adjust floor glides if present.

8. Specifications

9. Warranty and Support

This product comes with a standard manufacturer's warranty. Please refer to your purchase documentation or contact the retailer for specific warranty terms and conditions.

For technical assistance, missing parts, or any other inquiries, please contact Oyajia customer support through the retailer's platform or the contact information provided with your purchase. Please have your model number (5316283) and purchase date ready when contacting support.