HCALORY HBS1S

Download PDF
Contents

HCALORY 8KW HBS1S Diesel Air Heater User Manual

Model: HBS1S | Brand: HCALORY

1. Introduction

This manual provides essential instructions for the safe and efficient operation, installation, and maintenance of your HCALORY 8KW HBS1S Diesel Air Heater. Please read this manual thoroughly before use and retain it for future reference.

2. Safety Information

  • Carbon Monoxide Warning: This heater must be exhausted to the outdoors to prevent carbon monoxide (CO) poisoning. Never operate the heater in an enclosed space without proper ventilation.
  • Flammable Materials: During operation, keep flammable or explosive materials clear of the exhaust pipe area to prevent ignition of combustible materials and potential fire hazards.
  • Electrical Safety: Ensure all electrical connections are secure and correct. Avoid over-voltage, short-circuits, and reverse connections.
  • Overheating Protection: The unit is equipped with overheating protection. If the heater shuts down unexpectedly, refer to the troubleshooting section.
  • Fuel Type: Use diesel fuel only. Do not use gasoline or other flammable liquids.
  • Children and Pets: Keep children and pets away from the operating heater and exhaust components.

3. Package Contents

The HCALORY 8KW HBS1S Diesel Air Heater package includes the following items:

  • 8KW Diesel Heater Unit (with integrated fuel tank)
  • LCD Control Panel
  • Remote Control
  • 1.5m (59 inch) Extension Cable for Control Panel
  • AC Power Adapter (110V)
  • DC Power Cables (12V/24V)
  • Exhaust Pipe
  • Intake Pipe
  • Air Filter
  • Silencer
  • Air Outlet Pipe/Vent
  • Mounting Brackets and Hardware (Hose clamps, screws, etc.)
  • User Manual
HCALORY 8KW HBS1S Diesel Air Heater and included accessories
Figure 1: HCALORY 8KW HBS1S Diesel Air Heater unit with all included accessories.

4. Setup and Installation

4.1. Exhaust and Intake Pipe Installation

  1. Attach the exhaust pipe to the designated port on the heater using the provided clamps. Ensure it is securely fastened and vents outdoors to prevent carbon monoxide buildup.
  2. Connect the intake pipe to the opposite end of the heater. Secure it with clamps.
  3. Attach the air filter to the end of the intake pipe.
  4. Install the silencer onto the exhaust pipe, securing it with the provided clamps.
  5. Attach the air outlet pipe/vent to the front heating outlet. This can be swiveled to direct airflow.
Diagram showing the exhaust and intake pipe connections on the diesel heater.
Figure 2: Proper installation of exhaust and intake pipes. Ensure all connections are tight and exhaust vents outside.

4.2. Fueling the Heater

  1. Unscrew the red cap on top of the heater unit to access the fuel tank.
  2. Carefully pour diesel fuel into the tank. The tank has a maximum capacity of 5 liters. Do not overfill.
  3. Securely replace the red cap.
Image showing the fuel tank cap and fuel level indicator on the diesel heater.
Figure 3: Fuel tank with level indicator. Fill with diesel fuel only.

4.3. Electrical Connections

The HBS1S heater supports both AC and DC power sources.

  1. For 110V AC Power: Connect the provided AC power adapter to the heater's power input port. Plug the adapter into a standard 110V AC outlet.
  2. For 12V/24V DC Power: Use the provided DC power cables. Connect the positive (+) and negative (-) terminals to a compatible 12V or 24V DC power source (e.g., vehicle battery). Ensure correct polarity.
Image showing the various power connection options for the diesel heater, including AC adapter and DC cables.
Figure 4: Power connection options. Use either the AC adapter or DC cables depending on your power source.

4.4. Control Panel Extension

The LCD control panel can be detached from the main unit and extended using the 1.5m (59 inch) extension cable for convenient indoor operation.

  1. Carefully detach the LCD control panel from its housing on the heater unit.
  2. Connect the extension cable to the control panel and the corresponding port on the heater unit.
  3. Mount the control panel in a convenient indoor location.
Image illustrating the use of the 5-foot extension cord for the control panel, allowing indoor placement.
Figure 5: The 5-foot extension cord allows for flexible placement of the control panel indoors.

4.5. Installation Video Guides

For visual guidance on installation, please refer to the following official seller videos:

Video 1: Hcalory Blazecore Station 1S Installation of Extension Cords. This video demonstrates how to install the extension cord for the control panel.
Video 2: Hcalory Blazecore Station 1S Installation Operation. This video provides a general overview of the installation and initial operation steps.

5. Operating Instructions

5.1. Initial Startup

  1. After ensuring all installation steps are complete and fuel is added, press and hold the power button on the LCD control panel for 2-3 seconds to turn on the heater.
  2. The heater will initiate a purge cycle to draw fuel into the system. This may take a few minutes.
  3. Once the purge cycle is complete, the heater will begin to generate warm air. Allow 3-5 minutes for the heater to fully warm up and reach optimal performance.

5.2. Control Options

The HBS1S heater offers multiple ways to control its operation:

  • LCD Control Panel: Directly adjust temperature, fan speed, and other settings using the buttons on the panel.
  • Remote Control: Use the included remote control to power the unit on/off and adjust basic settings from a distance of up to 98 feet.
  • Smart App Control (Bluetooth): Connect your smartphone via Bluetooth to the HCALORY app. The app provides advanced features such as:
    • Temperature Setting
    • Multiple Timing Groups
    • Gear Setting (Fan Speed)
    • Altitude Mode Activation
    • Auto Start-Stop Function
    • Fan Only Mode (for air circulation without heat)
Image showing the three control methods: Smart App, Remote Control, and LCD Panel.
Figure 6: The HBS1S offers versatile control options including a smart app, remote, and LCD panel.

5.3. Smart Dual-Altitude Mode

The heater features a smart dual high-altitude mode (8200 ft / 16400 ft). This system automatically detects and optimizes the air-fuel ratio for steady heating performance, even in thin mountain air. No complicated manual settings are required for altitude adjustments.

Image depicting the Smart Dual-Altitude Mode feature, showing automatic air-fuel ratio optimization.
Figure 7: Smart Dual-Altitude Mode ensures optimal performance at various elevations.

5.4. Auto Start-Stop and Fuel Efficiency

The intelligent temperature sensor allows the heater to automatically cycle on and off to maintain a set indoor temperature. This feature significantly improves heating efficiency and reduces fuel consumption.

Image illustrating the Auto Start-Stop function for maintaining temperature and saving fuel.
Figure 8: Auto Start-Stop feature for energy saving and consistent temperature.

5.5. Shutting Down the Heater

To turn off the heater, press and hold the power button on the control panel for 2-3 seconds. The unit will initiate a cool-down cycle before completely shutting down. Allow the cool-down process to complete before packing or moving the unit.

6. Maintenance

Regular maintenance ensures the longevity and efficient operation of your diesel heater.

  • Fuel Filter: Regularly check and clean or replace the fuel filter to prevent blockages and ensure clean fuel delivery.
  • Air Filter: Inspect the air filter periodically and clean any accumulated dust or debris. A clogged air filter can reduce efficiency.
  • Exhaust System: Ensure the exhaust pipe and silencer are free from obstructions and damage. Check for any leaks.
  • General Cleaning: Keep the exterior of the heater clean. Avoid spraying water directly onto the unit.
  • Storage: When storing the heater for extended periods, ensure the fuel tank is empty and the unit is clean and dry.

7. Troubleshooting

If you encounter issues with your HCALORY HBS1S Diesel Air Heater, refer to the following common problems and solutions:

ProblemPossible CauseSolution
Heater does not startNo power, low fuel, clogged fuel line, air in fuel line.Check power connection, add fuel, check fuel filter, prime fuel system.
Error Code E-10 (as mentioned in a customer review)General malfunction, potentially related to ignition or fuel delivery.Consult the detailed manual for specific E-10 code interpretation or contact customer support.
Error Code E093 (temperature sensor malfunction)Faulty temperature sensor or main board issue.Check temperature sensor connection, replace sensor, or replace main board. Contact customer support for parts.
Weak or no heat outputLow fan speed, clogged air intake/exhaust, low fuel.Increase fan speed, clear obstructions, add fuel.
Excessive smokePoor fuel quality, incorrect air-fuel mixture, clogged burner.Use high-quality diesel, check air intake, clean burner.

For more detailed troubleshooting or if the problem persists, please contact HCALORY customer support.

8. Specifications

FeatureSpecification
BrandHCALORY
Model Name8KW Diesel Air Heater (HBS1S)
Wattage8 KW
Output Wattage8 Kilowatts
Fuel TypeDiesel
Power SourceDiesel (with 110V AC & 12V/24V DC electrical input)
Heating AreaUp to 256 sq.ft.
Heating Efficiency18% improved (2025 aluminum body upgrade)
Warm-up Time122°F in 3.5 min, 212°F in 5.5 min
Altitude ModeSmart Dual-Altitude (8200 ft / 16400 ft)
Control MethodsLCD Panel, Remote Control (98 ft), Smart App (Bluetooth 32 ft)
Control Panel Extension5 ft (1.5m) cable included
Safety FeaturesOver-heating, short-circuit, reverse connection, over-voltage safeguards
Item Weight22.9 pounds
Product Dimensions8 x 20 x 19 inches

9. Warranty and Support

For warranty information, technical support, or to order replacement parts, please refer to the contact details provided in your product packaging or visit the official HCALORY website. Keep your purchase receipt for warranty claims.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.