1. Introduction
This manual provides comprehensive instructions for the installation, operation, and maintenance of your XINFUTE V9014557 G3R 2D Central Air Conditioning Control unit. Please read this manual thoroughly before using the product to ensure proper function and longevity.
Package Contents:
- 1 x XINFUTE V9014557 G3R 2D Central Air Conditioning Control unit
- (Batteries are not included)
This control unit is designed for compatibility with Haier Ciac Central Air Conditioning systems.
2. Product Overview
The XINFUTE V9014557 G3R 2D is a replacement control unit for central air conditioning systems. It features a clear display and intuitive buttons for managing various functions of your air conditioning unit.

Figure 1: Front view of the XINFUTE V9014557 G3R 2D Central Air Conditioning Control unit. The unit features a large LCD screen on the left and an array of control buttons on the right, including MODE, FAN, SWING, HEALTH, TEMP, CLOCK, TIME, TIMER, SET, RECOVERY, CHECK, FILTER, RESET, and ON/OFF.

Figure 2: Side view of the control unit, demonstrating its compact profile when placed on a clear display stand. This view highlights the ergonomic design of the buttons.

Figure 3: Angled front view of the control unit on its stand, providing a clear perspective of the display and button layout.
3. Setup
3.1 Battery Installation
The control unit requires 2 AAA batteries (not included) for operation. To install the batteries:
- Locate the battery compartment cover on the back of the unit.
- Slide the cover open.
- Insert two AAA batteries, ensuring correct polarity (+ and -).
- Close the battery compartment cover securely.
3.2 Wiring Connection
This control unit is designed to connect directly to your central air conditioning system. Professional installation is recommended for wiring connections.

Figure 4: Back view of the control unit, showing the wiring terminals labeled A, B, and C, along with a small switch and product identification details.
- Identify the corresponding wiring terminals on your air conditioning system.
- Connect the wires from your system to the terminals A, B, and C on the back of the control unit. Ensure secure and correct connections according to your air conditioning system's wiring diagram.
- Once wired, the unit is ready for initial power-up.
4. Operating Instructions
Familiarize yourself with the buttons and their functions for optimal control of your air conditioning system.
4.1 Basic Operation
- ON/OFF: Press this button to power the unit on or off.
- MODE: Cycles through available operating modes (e.g., Cool, Heat, Fan, Dry, Auto).
- FAN: Adjusts the fan speed (e.g., Low, Medium, High, Auto).
- SWING: Activates or deactivates the louver swing function.
- TEMP ▲ / ▼: Increases or decreases the desired temperature setting.
4.2 Advanced Functions
- HEALTH: Activates or deactivates the health function (refer to your AC unit's manual for specific details).
- CLOCK: Enters clock setting mode.
- TIME ▲ / ▼: Adjusts the time when in clock or timer setting mode.
- TIMER: Sets the on/off timer for the air conditioning unit.
- SET: Confirms settings in various modes (e.g., timer, clock).
- RECOVERY: Used for specific system recovery functions (consult your AC unit's manual).
- CHECK: Initiates a system check or displays error codes.
- FILTER: Indicates when the air filter needs cleaning or replacement. Press to reset after maintenance.
- RESET: Resets the control unit to factory default settings or clears certain indicators.
5. Maintenance
5.1 Cleaning the Unit
To maintain the appearance and functionality of your control unit:
- Wipe the surface with a soft, dry cloth.
- Do not use abrasive cleaners, solvents, or chemical sprays, as these can damage the unit.
5.2 Battery Replacement
Replace batteries when the display becomes dim or the unit becomes unresponsive. Follow the battery installation steps in Section 3.1.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Unit does not power on. | Dead or incorrectly installed batteries. | Replace batteries, ensuring correct polarity. |
| Unit is unresponsive. | Low batteries; unit may be out of range or obstructed. | Replace batteries. Ensure clear line of sight to the AC unit's receiver. |
| Display is dim or blank. | Low battery power. | Replace batteries. |
| AC unit does not respond to commands. | Incorrect wiring; compatibility issue; AC unit power off. | Verify wiring connections. Ensure AC unit is powered on. Confirm compatibility with your specific Haier Ciac model. |
7. Specifications
- Model: V9014557 G3R 2D
- Brand: XINFUTE
- Compatibility: Haier Ciac Central Air Conditioning Systems
- Power Source: 2 x AAA Batteries (not included)
- Material: ABS Material
- Product Dimensions: 4 x 3 x 1 inches (approximately)
- Item Weight: 2.4 ounces (approximately)
8. Warranty and Support
8.1 Warranty Information
This XINFUTE product comes with a one-year warranty from the date of purchase. This warranty covers manufacturing defects and ensures the product functions as intended under normal use.
8.2 Customer Support
For any questions, concerns, or warranty claims, please contact XINFUTE customer support. All goods are inspected before shipment. If you are not satisfied with your purchase, you may contact us within 24 hours of receipt.
For further assistance, please visit the XINFUTE Store on Amazon.