Daysnew DB100 Wireless TV Headphones User Manual

Introduction

This manual provides detailed instructions for the setup, operation, and maintenance of your Daysnew DB100 Wireless TV Headphones. Designed for comfort and clear audio, these headphones feature both 2.4GHz RF and Bluetooth 5.3 connectivity, making them compatible with a wide range of devices including televisions, phones, and computers. Please read this manual thoroughly to ensure proper use and to maximize your listening experience.

Image: Daysnew DB100 headphones being used by a senior, highlighting their suitability for clear audio needs.

What's Included

The Daysnew DB100 package contains the following components:

• 1 x Daysnew Wireless TV Headset
• 1 x RF Transmitter (Charging Dock)
• 1 x Type-C Adapter
• 1 x AUX Audio Cable
• 1 x RCA Audio Cable
• 1 x Optical Audio Cable
• 2 x Rechargeable AAA Batteries
• 1 x User Manual

Product Overview

Headphones

The Daysnew DB100 headphones are designed for comfort during extended use. They feature soft, breathable memory foam ear cushions and an adjustable headband for a secure fit. Controls are located on the earcups for easy access.

Image: Side view of the Daysnew DB100 headphones on a user, demonstrating their ergonomic design.

Image: Detailed view of the headphone's comfort features, including soft earcups and adjustable headband.

Controls and Indicators

The right earcup typically houses the power button. The left earcup features volume controls (+/-) and a mode switch button to toggle between TV (RF 2.4GHz) and Bluetooth modes. The charging dock has indicator lights for charging status and connection mode.

Image: Detailed view of the headphone controls and compatibility icons.

RF Transmitter / Charging Dock

The transmitter serves as both a charging station for the headphones and an RF signal emitter for TV audio. It includes input ports for Optical, RCA, and AUX audio connections.

Image: The charging dock with headphones, illustrating its readiness for use with various TV brands.

Setup Instructions

1. Initial Charging

1. Insert the two rechargeable AAA batteries into the headphone battery compartments (if not pre-installed).
2. Connect the Type-C adapter to the charging dock and plug it into a power outlet.
3. Place the headphones onto the charging dock. The indicator light on the dock will flash green during charging and turn solid green when fully charged. A full charge takes approximately 5 hours.

Image: Illustrates the long battery life and convenient charging of the headphones.

2. Connecting to a Television (RF 2.4GHz Mode)

The RF transmitter supports Optical, RCA, and AUX connections. Choose the appropriate cable for your TV.

Optical Connection (Recommended for Digital Audio)

1. Remove the protective caps from both ends of the optical audio cable.
2. Connect one end of the optical cable to the OPTICAL IN port on the charging dock.
3. Connect the other end of the optical cable to the OPTICAL OUT port on your television. Ensure the cable is inserted correctly (flat side aligned).
4. Access your TV's audio settings. Navigate to the sound output settings and select PCM as the digital audio output format. This step is crucial for optical connection.
5. Once connected and powered on, a solid white indicator light on top of the charging dock signifies a successful TV (RF) connection.

RCA Connection (Analog Audio)

1. Connect the RCA audio cable to the RCA IN ports (red and white) on the charging dock.
2. Connect the other end of the RCA cable to the corresponding AUDIO OUT ports (red and white) on your television.
3. Ensure your TV's audio output is set to analog or external speakers if applicable.

AUX Connection (3.5mm Analog Audio)

1. Connect the AUX audio cable to the AUX IN port on the charging dock.
2. Connect the other end of the AUX cable to the HEADPHONE OUT or AUDIO OUT (3.5mm jack) port on your television or other audio source.

3. Bluetooth Connection (for Phones, iPads, Laptops)

1. Ensure the headphones are powered on.
2. Press and hold the mode switch button on the left earcup until the indicator light on the charging dock turns blue, indicating Bluetooth pairing mode.
3. On your device (phone, iPad, laptop), go to Bluetooth settings and search for "Daysnew DB100" (or similar).
4. Select the headphones to pair. Once connected, the blue indicator light will remain solid.

Operating Instructions

Power On/Off

• To power on the headphones, press and hold the power button on the right earcup for a few seconds until an indicator light appears.
• To power off, press and hold the power button again until the indicator light turns off.

Volume Control

• Use the Volume + button on the left earcup to increase the audio volume.
• Use the Volume - button on the left earcup to decrease the audio volume.
• The headphones feature personal volume control, allowing you to adjust the audio independently of the TV's main volume.

Image: Illustrates the immersive audio experience provided by the headphones.

Switching Modes (TV / Bluetooth)

• To switch between TV (RF 2.4GHz) mode and Bluetooth mode, short press the mode switch button on the left earcup.
• The indicator light on the charging dock will change: White for TV mode, Blue for Bluetooth mode.
• By default, the headphones will start in TV mode when powered on.

Maintenance

• Cleaning: Use a soft, dry cloth to clean the headphones and charging dock. Do not use liquid cleaners or abrasive materials.
• Storage: When not in use, store the headphones on the charging dock in a cool, dry place away from direct sunlight and extreme temperatures.
• Battery Care: To prolong battery life, avoid fully discharging the headphones frequently. Charge them regularly, especially if they will not be used for an extended period.
• Avoid Moisture: Keep the device away from water and high humidity to prevent damage.

Troubleshooting

No Sound in TV Mode

• Check Connections: Ensure all audio cables (Optical, RCA, or AUX) are securely connected between the TV and the charging dock.
• TV Audio Settings: For optical connection, verify that your TV's digital audio output is set to PCM. For RCA/AUX, ensure the TV's audio output is enabled and not muted.
• Headphone Mode: Confirm the headphones are in TV (RF) mode (white indicator light on the dock).
• Volume: Increase the volume on both the headphones and the TV.
• Power: Ensure both the charging dock and headphones are powered on.

No Sound in Bluetooth Mode

• Headphone Mode: Ensure the headphones are in Bluetooth mode (blue indicator light on the dock).
• Device Pairing: Verify that the headphones are successfully paired with your Bluetooth device. Re-pair if necessary.
• Device Volume: Check the volume level on your connected Bluetooth device.
• Distance: Ensure the headphones are within the Bluetooth operating range (typically up to 10 meters or 33 feet).

Headphones Not Charging

• Power Connection: Check that the Type-C adapter is securely connected to the charging dock and a working power outlet.
• Headphone Placement: Ensure the headphones are correctly seated on the charging dock, making proper contact with the charging pins. The green indicator light should flash.
• Batteries: Verify that the rechargeable AAA batteries are correctly inserted.

Specifications

Warranty and Support

Daysnew is committed to providing quality products and customer satisfaction. While specific warranty details are not provided in this manual, Daysnew offers 24/7 customer service to assist you with any questions or issues you may encounter with your DB100 Wireless TV Headphones. Please refer to the product packaging or the official Daysnew website for the most up-to-date warranty information and contact details.

For technical support or inquiries, please contact Daysnew customer service through the channels provided with your purchase or on the manufacturer's website.