1. Introduction
Thank you for choosing the Empava 71-inch Two-Person Acrylic Whirlpool Bathtub. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your new bathtub. Please read all instructions carefully before installation and use, and retain this manual for future reference.
Image 1.1: The Empava 71-inch Two-Person Acrylic Whirlpool Bathtub, showcasing its spacious design, active hydro-massage jets, and subtle chromotherapy lighting. Two headrests are visible, indicating its two-person capacity.
2. Important Safety Information
To reduce the risk of injury, please observe the following safety precautions:
- Electrical Safety: Ensure the bathtub is connected to a Ground-Fault Circuit Interrupter (GFCI) protected circuit. Do not operate without a properly installed GFCI.
- Water Temperature: Test the water temperature before entering the tub. Water temperatures above 100°F (38°C) can be hazardous to your health.
- Children: Supervise children at all times when they are in or near the bathtub.
- Health Conditions: Consult a physician before use if you are pregnant, diabetic, have heart disease, high blood pressure, or any other medical condition.
- Chemicals: Use only recommended cleaning agents. Avoid abrasive cleaners or harsh chemicals that may damage the acrylic surface or internal components.
- Entry/Exit: Exercise caution when entering or exiting the bathtub. The textured floor provides slip resistance, but wet surfaces can still be slippery.
3. Setup and Installation
This section outlines the steps for unboxing and installing your Empava whirlpool bathtub. Professional installation is recommended.
3.1 Unboxing
Carefully remove the wooden crate panels. Locate the accessory box and protective foam. Inspect all components for damage before proceeding.
Video 3.1: This video demonstrates the unboxing process of the Empava 71-inch Whirlpool Bathtub, including removal of the wooden crate and protective packaging, and initial component installation.
3.2 Component Installation
Your bathtub comes with pre-installed drain, waterfall faucet, and showerhead. Ensure all connections are secure and watertight. The included pillows can be placed for added comfort.
Image 3.2: A diagram illustrating the precise dimensions of the Empava 71-inch Two-Person Acrylic Whirlpool Bathtub, including length, width, height, and internal measurements for water jets and seating areas. This is crucial for planning the installation space.
Image 3.3: A detailed view of the sleek waterfall faucet and the various control knobs for water temperature and jet functions, highlighting the polished chrome finish.
Image 3.4: A close-up of the two black, ergonomic headrests positioned at either end of the bathtub, designed for comfortable reclining during a soak.
4. Operating Instructions
Enjoy the full features of your Empava whirlpool bathtub by following these operating guidelines.
4.1 Filling the Bathtub
Turn the hot and cold water knobs to achieve your desired water temperature. The waterfall faucet provides a steady stream. Ensure the water level is above the jets before activating the hydro-massage system.
4.2 Activating Hydro-Massage Jets
The bathtub features a powerful 16-zone hydrotherapy system. Press the pneumatic switch to activate the 1.5HP motor, which powers the jets. Adjust the flow and direction of individual jets by rotating their outer rings to target specific areas for deep-tissue massage.
Image 4.1: A close-up shot of the hydro-massage jets within the bathtub, showing water being powerfully expelled, creating a therapeutic bubbling effect. This image highlights the functionality of the jet system.
4.3 Chromotherapy Lighting
The bathtub includes chromotherapy lighting to enhance your relaxation experience. The lights automatically cycle through various colors when the jets are active. There is no separate control to turn off the chromotherapy lights while the jets are running.
Video 4.2: This video provides a dynamic overview of the Empava 71-inch Two-Person Acrylic Whirlpool Bathtub in operation, demonstrating the powerful hydro-massage jets and the soothing chromotherapy lighting effects.
Image 4.3: A couple enjoying a relaxing soak in the Empava whirlpool bathtub, with the chromotherapy lights illuminating the water, creating a serene and inviting atmosphere.
5. Maintenance and Care
Proper care will ensure the longevity and pristine appearance of your Empava bathtub.
- Cleaning the Acrylic Surface: Use a soft cloth and a non-abrasive, mild liquid cleaner. Avoid harsh chemicals, scouring pads, or abrasive powders, as these can scratch the acrylic.
- Jet Cleaning: Periodically fill the tub with warm water and add a small amount of dishwasher detergent or a specialized jet cleaning solution. Run the jets for 10-15 minutes, then drain and rinse thoroughly.
- Faucet and Fixtures: Clean chrome fixtures with a soft cloth and a non-abrasive cleaner designed for chrome.
- Drain Maintenance: Regularly check and clean the drain to prevent clogs. The push-pop drain mechanism is easy to remove for cleaning.
- Preventing Stains: Avoid leaving bath products, such as bath bombs or dyes, to dissolve directly on the acrylic surface for extended periods.
6. Troubleshooting
If you encounter any issues with your bathtub, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Jets not activating | Not enough water in the tub; GFCI tripped; Motor issue | Ensure water level is above jets; Reset GFCI; Contact customer support if motor does not respond. |
| Weak jet pressure | Air intake blocked; Jet nozzles clogged | Check for obstructions around air intake; Clean jet nozzles as per maintenance instructions. |
| Water not draining | Drain mechanism clogged or stuck | Remove and clean the push-pop drain mechanism. |
| Flickering chromotherapy lights | Electrical connection issue; LED component fault | Check electrical connections; If problem persists, contact customer support. |
7. Specifications
Key technical details for your Empava whirlpool bathtub:
| Feature | Detail |
|---|---|
| Model Number | E1-71JT667B |
| Product Dimensions | 71"W x 42"L x 27"H |
| Material | Acrylic (Fiberglass-reinforced) |
| Color | White |
| Capacity | 177 Gallons |
| Hydro-Massage Jets | 16 (6 lumbar, 6 body, 4 foot) |
| Motor Horsepower | 1.5 HP |
| Installation Type | Freestanding / Alcove |
| Certification | ETL/UL Certified Motor |
| Included Components | Waterfall Faucet, Showerhead (3 spray modes), 2 Pillows, Pre-installed Drain, 120V GFCI cord |
| Item Weight | 338 pounds |
8. Warranty and Support
Your Empava 71-inch Two-Person Acrylic Whirlpool Bathtub is backed by a 3-year limited warranty, covering the motor and other specified components against manufacturing defects.
For warranty claims, technical assistance, or any questions regarding your product, please contact Empava Customer Support:
- Website: Visit the Empava Store on Amazon
- Phone: Refer to your purchase documentation for the most current contact number.
- Email: Refer to your purchase documentation for the most current contact email.
Please have your model number (E1-71JT667B) and proof of purchase ready when contacting support.