1. Product Overview
The Demeyere Clyde 4-door wardrobe is designed to provide optimal storage for your bedroom. It features a modern aesthetic with a white matt and Kronberg oak finish, offering a warm and contemporary ambiance. This wardrobe is part of the CLYDE adult bedroom furniture range, known for its ample storage capacity and adaptability to various needs.
Image 1: Front view of the Demeyere Clyde 4-door wardrobe in white matt and Kronberg oak finish.
2. Safety Information
WARNING:
- This furniture must be wall-mounted for optimal stability. Failure to do so may result in tipping and serious injury.
- Please follow all assembly instructions carefully to avoid any risk of accident.
- This furniture is heavy (approximately 107.37 kg) and must be handled with caution during installation and use. It is recommended that two or more people assemble and move this wardrobe.
- Keep small parts and packaging materials away from children.
3. Package Contents
Before beginning assembly, ensure all parts are present and undamaged. Refer to the included parts list in your physical manual for detailed identification.
Key components include:
- Particle board panels (15mm thick) for structure and drawer fronts.
- Hollowcore top panel (38mm thick).
- Hanging rail (83.8 cm).
- Drawer components (2 sets).
- Shelf panels (4 units).
- Integrated handle grips.
- Assembly hardware (screws, dowels, brackets, wall-mounting kit).
4. Setup and Assembly
Assembly of the Demeyere Clyde wardrobe requires careful attention to detail. It is recommended to have at least two adults for assembly due to the size and weight of the components. Please ensure you have adequate space and the necessary tools (e.g., screwdriver, hammer, drill for wall mounting).
- Unpack Components: Carefully remove all parts from the packaging. Lay them out on a clean, soft surface to prevent scratches.
- Assemble Frame: Follow the step-by-step diagrams in your physical assembly guide to connect the side panels, base, and top panel.
- Install Shelves and Hanging Rail: Insert the four shelves into their designated positions. Secure the 83.8 cm hanging rail within the wardrobe section.
- Assemble Drawers: Construct the two drawers using the provided hardware. Ensure smooth operation of the drawer slides.
- Attach Doors: Mount the four doors to the wardrobe frame using the hinges. Adjust as necessary for proper alignment.
- Wall Mounting: This is a critical safety step. Secure the wardrobe to a solid wall using the provided anti-tip hardware. Locate wall studs if possible for maximum security. Do not skip this step.
Image 2: Interior view of the wardrobe showing the hanging rail, shelves, and open drawers, illustrating storage configuration.
5. Operating and Usage
The Demeyere Clyde wardrobe is designed for efficient clothing storage. Its functional design includes integrated handle grips for easy access to compartments.
- Hanging Rail: The 83.8 cm hanging rail supports up to 22 kg, suitable for coats, shirts, and dresses.
- Drawers: The two drawers (useful dimensions L79.7 x D38.7 x H22.6 cm) can each hold up to 13 kg, ideal for folded garments, accessories, or linens.
- Shelves: The four shelves (useful dimensions L48.5 x D47.3 cm) each support up to 9 kg, perfect for sweaters, bags, or other items.
Image 3: Close-up of a drawer, highlighting the integrated handle design.
6. Maintenance
To ensure the longevity and appearance of your Demeyere Clyde wardrobe, follow these maintenance guidelines:
- Cleaning: Wipe surfaces with a soft, damp cloth. Avoid abrasive cleaners or harsh chemicals, which can damage the finish.
- Dusting: Regularly dust with a dry, soft cloth.
- Spills: Clean spills immediately to prevent staining.
- Hardware: Periodically check all screws and fittings to ensure they are tight. Retighten if necessary.
- Sunlight: Avoid prolonged exposure to direct sunlight to prevent fading of the finish.
- Humidity: Maintain a stable room humidity to prevent warping or cracking of the wood-based panels.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Doors do not align properly. | Hinges are not adjusted correctly or frame is not level. | Adjust the screws on the hinges. Ensure the wardrobe is on a level surface; use shims if necessary. |
| Drawers stick or do not slide smoothly. | Drawer slides are misaligned or obstructed. | Check that the drawer slides are correctly installed and free of debris. Ensure all screws are tight. |
| Wardrobe feels unstable. | Not properly wall-mounted or on an uneven floor. | Ensure the wardrobe is securely anchored to the wall using the anti-tip kit. Verify the floor is level. |
| Missing parts during assembly. | Packaging not thoroughly checked or parts lost. | Carefully re-check all packaging materials. Contact Demeyere customer support if parts are genuinely missing. |
8. Specifications
- Brand: Demeyere
- Model Number: 105584
- Color: White Matt & Kronberg Oak
- Material: Particle board, Hollowcore (Oak finish)
- Overall Dimensions (L x W x H): 50 x 138.2 x 220.5 cm
- Item Weight: Approximately 107.37 kg
- Hanging Rail Length: 83.8 cm
- Hanging Rail Max Load: 22 kg
- Number of Drawers: 2
- Drawer Useful Dimensions (L x D x H): 79.7 x 38.7 x 22.6 cm
- Drawer Max Load (each): 13 kg
- Number of Shelves: 4
- Shelf Useful Dimensions (L x D): 48.5 x 47.3 cm
- Shelf Max Load (each): 9 kg
- Special Feature: Integrated handle grips
- Fixation Type: Floor Mount (with required wall anchoring)
- Style: Modern
- Origin: Made in France
9. Warranty and Support
The Demeyere Clyde wardrobe comes with a 2-year warranty. This warranty covers manufacturing defects under normal household use. Please retain your proof of purchase for warranty claims.
For technical assistance, missing parts, or warranty inquiries, please contact Demeyere customer support. Refer to the contact information provided in your purchase documentation or visit the official Demeyere website.
Note: Information regarding spare parts availability is currently unavailable.
