1. Product Overview
The AIKVSXER 1x4 LED Flat Panel Light is a high-efficiency, surface-mount ceiling light designed to provide superior illumination for various indoor environments. It features 50W power output and 5500 lumens of brightness, offering significant energy savings compared to traditional fluorescent lights. This fixture includes adjustable color temperatures (3000K Warm Light, 4000K Neutral Light, 5000K Daylight) and supports 10-100% TRIAC dimming, allowing you to customize the lighting to suit your needs. Its ultra-thin design ensures a sleek, modern appearance.
Figure 1: AIKVSXER 1x4 LED Flat Panel Light (18 Pack)
Figure 2: Comparison highlighting the superior brightness and lifespan of the new LED flat panel light over older fluorescent models.
2. Setup and Installation
The AIKVSXER 1x4 LED Flat Panel Light is designed for easy surface mount installation on various ceiling types, including cement, wood, and drywall. All necessary screws and a light kit are included.
2.1 Package Contents
- AIKVSXER 1x4 LED Flat Panel Light(s)
- Mounting Screws (suitable for various wall installations)
- Wire Nuts
- Installation Manual
2.2 Installation Steps
- Mark the Hole: Use a pen to mark the drilling points on the ceiling as indicated by the installation template (not included, refer to product packaging for template).
- Drill Holes: Drill the marked holes using a 6mm electric drill.
- Fix Rope and Clip: Secure the rope with screws and clip the light fixture onto the wire hanger. This provides temporary support during wiring.
- Connect Wires: Connect the light's wires to the corresponding color wires from your electrical supply using wire nuts. Ensure all connections are secure and follow local electrical codes.
- Push Wire Nut and Tighten: Carefully push the wire nuts and excess wiring into the pre-drill holes. Secure the light fixture to the ceiling by tightening the screws.
Figure 3: Step-by-step visual guide for surface mount installation.
Note: For optimal installation, ensure mounting holes align with ceiling joists where possible. If mounting to drywall without joists, use appropriate drywall anchors or toggle bolts (not included) for secure fastening, as the provided plastic anchors may not be sufficient for all installations.
3. Operating Instructions
3.1 Color Temperature Selection
The light fixture offers three color temperature options: 3000K (Warm Light), 4000K (Neutral Light), and 5000K (Daylight). You can cycle through these options by continuously turning the wall switch ON and OFF within 5 seconds. The light will change color with each toggle.
Figure 4: Illustrates how to change color temperature using a standard wall switch.
3.2 Memory Function
The fixture includes a memory function that retains the last selected color temperature when the light is turned off and then back on. To reset the color to 5000K Daylight, quickly turn the light ON and OFF three times within 1 second.
3.3 TRIAC Dimming
This LED flat panel light supports 10-100% TRIAC dimming, allowing for smooth adjustment of brightness. A compatible TRIAC dimmer switch (not included) is required for this functionality. The fixture is not compatible with motion sensing switches.
Figure 5: Demonstrates the 10-100% smooth dimming range with a compatible TRIAC dimmer.
Video 1: Official product video demonstrating the features of the AIKVSXER 1x4 LED Flat Panel Light, including its low profile design, color temperature options (3000K, 4000K, 5000K), smooth dimming, and memory function.
4. Maintenance
To ensure the longevity and optimal performance of your AIKVSXER LED Flat Panel Light, follow these simple maintenance guidelines:
- Cleaning: Disconnect power before cleaning. Use a soft, dry cloth to wipe the surface of the light fixture. Avoid using abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish or internal components.
- Inspection: Periodically check the wiring connections and mounting screws to ensure they remain secure.
- No User-Serviceable Parts: The LED chips and internal components are not user-serviceable. Do not attempt to disassemble the fixture.
5. Troubleshooting
If you encounter issues with your AIKVSXER LED Flat Panel Light, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | No power supply; Loose wiring; Faulty switch. | Check circuit breaker; Ensure all wire connections are secure; Test the wall switch. |
| Light flickers or dims inconsistently. | Incompatible dimmer switch; Loose wiring. | Ensure you are using a compatible TRIAC dimmer; Check wiring connections. This fixture is not compatible with motion sensing switches. |
| Cannot change color temperature. | Incorrect switching sequence; Switch not toggled within 5 seconds. | Ensure the wall switch is toggled ON and OFF continuously within 5 seconds for each color change. |
| Mounting issues (e.g., light feels flimsy, holes exposed). | Improper anchor usage; Misalignment with ceiling joists. | For drywall installations without joists, use robust drywall anchors or toggle bolts (not included) instead of the provided plastic anchors. Ensure precise marking and drilling to prevent exposed holes. |
6. Specifications
Detailed technical specifications for the AIKVSXER 1x4 LED Flat Panel Light:
- Brand: AIKVSXER
- Model Name: MC-BP14F-50KDN
- Color: Black
- Material: Aluminum
- Style: Modern
- Light Fixture Form: Ceiling
- Product Dimensions: 46.8"L x 12.6"W x 0.99"H
- Specific Uses For Product: Indoor use only
- Indoor/Outdoor Usage: Indoor
- Power Source: AC
- Installation Type: Surface Mount
- Special Feature: Corded
- Control Method: Touch (via wall switch)
- Light Source Type: LED
- Number of Light Sources: 18
- Voltage: 120 Volts
- Light Color: Neutral white, Daylight, Warm white (3000K/4000K/5000K selectable)
- Shape: Rectangular
- Included Components: Light kit included
- Lighting Method: Downlight
- Item Weight: 18.9 Pounds
- Number of Items: 18 (for this pack)
- Wattage: 50 watts
- Controller Type: Triac Dimmer compatible
- Switch Type: Touch (via wall switch)
- Unit Count: 18.0 Count
- Water Resistance Level: Not Water Resistant
- Brightness: 5500 Lumen
- Mounting Type: Ceiling Mount
- Shade Color: Black
- Fixture Type: Non Removable
- Assembly Required: Yes
7. Warranty and Support
7.1 Warranty Information
This AIKVSXER product comes with a Limited Warranty. Please refer to the warranty card included in your product packaging or contact AIKVSXER customer support for specific terms and conditions regarding warranty coverage and duration.
7.2 Customer Support
For any questions, technical assistance, or support regarding your AIKVSXER 1x4 LED Flat Panel Light, please contact AIKVSXER customer service. You can also visit the official AIKVSXER store for more information and resources:
