RAWM MH01 Wireless Lightweight Gaming Mouse User Manual

1. Introduction

The RAWM MH01 is a high-performance wireless gaming mouse designed for competitive gamers and enthusiasts. Featuring a PAW3395 optical sensor, lightweight construction, and versatile tri-mode connectivity, it offers precision, speed, and comfort for extended gaming sessions and daily use. This manual provides detailed instructions for setting up, operating, maintaining, and troubleshooting your MH01 gaming mouse.

Image 1.1: The RAWM MH01 Wireless Lightweight Gaming Mouse with its USB receiver.

Image 1.2: The RAWM MH01 mouse is suitable for various applications including gaming, entertainment, office work, and study.

2. Package Contents

Please verify that all the following items are included in your RAWM MH01 package:

• 1 x RAWM MH01 Wireless Gaming Mouse
• 1 x Giftbox
• 1 x Type-C Charging Cable (approximately 5 ft)
• 1 x User Manual
• 1 x Grip Tape set
• 1 x PTFE Skates set
• 1 x 2.4G USB Wireless Receiver (1K polling rate)
• 1 x USB Adapter

Note: The package contents are as described. Please refer to the included manual for any specific diagrams or additional details.

3. Key Features

The RAWM MH01 mouse incorporates advanced technology to enhance your computing and gaming experience:

• PAW3395 Optical Sensor: Equipped with the high-precision PAW3395 optical sensor, offering up to 26000 DPI for accurate and responsive tracking.
• Nordic 52840 Chip: Utilizes the Nordic 52840 chip for efficient power consumption and stable performance, supporting up to 8000Hz polling rate (with compatible dongle, not included with standard MH01).
• Lightweight Design: Weighing approximately 70g (±1g), the mouse is designed for swift movements and reduced fatigue during long usage periods.
• Tri-Mode Connectivity: Offers flexible connection options including Bluetooth 5.3, 2.4G USB wireless, and wired Type-C mode.
• Hot-Swappable Switches: Features a hot-swap switch design, allowing users to easily change switches (e.g., HUNAO Green and White Dot Switches, compatible with 3-pin switches like Kailh GM8.0 Black Mamba or HUANO Silent micro switches) to customize click feel and extend lifespan up to 100 million clicks.
• On-Mouse DPI Control: Quickly toggle between 4 default DPI stages (400/800/1600/3200) directly on the mouse.
• 7 Programmable Buttons: Customize button assignments to suit your gaming style and workflow using the RAWM Hub software.
• Dual Drive Software (RAWM Hub): Access comprehensive customization options via both desktop application and web hub for fine-tuning settings like DPI, polling rate, and lift-off distance.
• Long Battery Life: Integrated 600mAh rechargeable battery provides up to 165 hours of usage on a single charge.

Image 3.1: Overview of the MH01's core features including its sensor, chip, weight, and connectivity options.

Image 3.2: The hot-swappable switch design allows for easy customization and replacement of mouse switches.

Image 3.3: The MH01 offers extended battery life for prolonged use.

4. Setup and Connection

The RAWM MH01 offers three connection modes: 2.4G Wireless, Bluetooth, and Wired. Select the mode that best suits your needs.

Image 4.1: The MH01 supports three versatile connection modes.

4.1. 2.4G Wireless Connection

1. Locate the 2.4G USB wireless receiver in your package.
2. Plug the USB receiver into an available USB port on your computer.
3. Turn on the mouse using the switch located on the bottom. Ensure it is set to the 2.4G wireless mode (indicated by a specific position on the switch, usually marked).
4. The mouse should automatically connect to your computer. If not, press the pairing button (if available, usually near the switch) or refer to the troubleshooting section.

4.2. Bluetooth 5.3 Connection

1. Turn on the mouse and set the switch on the bottom to Bluetooth mode (usually marked BT).
2. On your computer, open Bluetooth settings.
3. Search for new devices. The mouse should appear as "RAWM MH01" or similar.
4. Select the mouse to pair. Follow any on-screen prompts to complete the pairing process.

4.3. Wired Connection

1. Connect the provided Type-C cable to the front port of the mouse.
2. Connect the other end of the Type-C cable to an available USB port on your computer.
3. The mouse will automatically switch to wired mode and begin charging. This mode also allows for use while charging.

5. Operating Instructions

5.1. DPI Control

The RAWM MH01 features an on-mouse DPI control button, typically located on the bottom of the mouse. Press this button to cycle through the default DPI stages:

• 400 DPI
• 800 DPI
• 1600 DPI
• 3200 DPI

For more advanced DPI settings, including increasing to 8 DPI stages or setting custom DPI values (50-26000), use the RAWM Hub software.

5.2. Customization with RAWM Hub Software

The RAWM Hub software provides extensive customization options for your MH01 mouse. It is available as both a desktop application and a web-based hub from the official RAWM website. With the software, you can:

• Customize all 7 programmable buttons.
• Adjust DPI settings with fine granularity.
• Fine-tune the polling rate (up to 1000Hz in 2.4G/wired mode, higher with specific dongle).
• Set Lift-Off Distance (LOD).
• Manage performance modes (Office, HP, Gaming+).
• Configure sleep time.
• Enable Angle Snapping and Motion Sync.
• Set key delay.

Image 5.1: The RAWM Hub software provides comprehensive control over mouse settings.

5.3. Ergonomics and Grip Styles

The RAWM MH01 is designed to be comfortable for various grip styles, making it suitable for a wide range of users and hand sizes. It accommodates:

• Palm Grip: The entire palm rests on the mouse, providing full support.
• Claw Grip: Fingers are arched, and the palm makes minimal contact with the back of the mouse.
• Fingertip Grip: Only the fingertips make contact with the mouse, allowing for maximum agility.

Image 5.2: The MH01's ergonomic design supports multiple grip styles for comfort.

6. Maintenance

6.1. Charging the Battery

To charge the RAWM MH01 mouse, connect the provided Type-C cable to the mouse's charging port and the other end to a USB power source (e.g., computer USB port, USB wall adapter). The mouse can be used while charging. A full charge typically takes approximately 2.5 to 3 hours.

6.2. Replacing Hot-Swappable Switches

The MH01 features hot-swappable switches, allowing you to replace them without soldering. To replace a switch:

1. Carefully remove the mouse shell or top cover to access the switch sockets. Refer to the detailed diagrams in the included physical manual if available.
2. Gently pull out the existing switch from its socket using a switch puller tool (if provided or acquired separately).
3. Align the pins of the new 3-pin switch with the holes in the socket.
4. Press the new switch firmly into place until it is fully seated.
5. Reassemble the mouse shell.

Note: Ensure the mouse is powered off before attempting to replace switches. Use compatible 3-pin switches only.

6.3. Cleaning the Mouse

To maintain optimal performance and hygiene, clean your mouse regularly:

• Use a soft, lint-free cloth slightly dampened with water or a mild cleaning solution to wipe the surface of the mouse.
• For crevices and button gaps, use a cotton swab or compressed air.
• Avoid using harsh chemicals, abrasive cleaners, or excessive moisture.

7. Troubleshooting

If you encounter issues with your RAWM MH01 mouse, refer to the following common solutions:

If the problem persists after trying these solutions, please contact RAWM customer support for further assistance.

8. Technical Specifications

Below are the detailed technical specifications for the RAWM MH01 Wireless Lightweight Gaming Mouse:

Image 8.1: Detailed technical specifications and dimensions of the MH01 mouse.

9. Warranty and Support

For information regarding the product warranty, please refer to the warranty card included in your package or visit the official RAWM website. RAWM provides ongoing software updates for the RAWM Hub, which can be accessed via their website.

For technical support, troubleshooting assistance beyond this manual, or inquiries about replacement parts, please contact RAWM customer service through the contact information provided on their official website or the product packaging.