Introduction
Thank you for purchasing the EDISHINE LED Table Lamp. This modern lamp features 360-degree illumination, stepless dimming, and three adjustable color temperatures to suit various lighting needs. This manual provides essential information for the safe and efficient use of your new lamp.
Safety Instructions
- Read all instructions carefully before use and retain for future reference.
- This product is intended for indoor use only. Do not expose to water or high humidity.
- Ensure the power supply voltage matches the lamp's requirements before plugging in.
- Unplug the lamp from the power outlet before cleaning or when not in use for extended periods.
- Do not attempt to disassemble or modify the lamp. This may void the warranty and pose a safety risk.
- Keep the lamp away from heat sources and direct sunlight.
- Do not operate the lamp with a damaged cord or plug. Contact customer support for assistance.
Package Contents
Verify that all items are present in the package:
- 1 x EDISHINE LED Table Lamp
- 1 x Power Adapter
- 1 x User Manual
Setup
- Unpack the Lamp: Carefully remove all components from the packaging.
- Place the Lamp: Position the lamp on a stable, flat surface, such as a nightstand or desk. Ensure there is adequate space around the lamp for optimal light distribution.
- Connect Power: Insert the power adapter's plug into the lamp's power input port. Then, plug the power adapter into a standard electrical outlet.

Image: The EDISHINE LED Table Lamp showing its full assembly, including the power cord and inline control button.

Image: A diagram illustrating the dimensions of the lamp: 16.9 inches height, 5.9 inches base diameter, and 70.8 inches cord length.
Operating Instructions
The lamp is controlled by a single inline button on the power cord.
- Power On/Off: Short press the control button to turn the lamp on or off.
- Adjust Color Temperature: When the lamp is on, short press the control button repeatedly to cycle through the three color temperature modes: Warm Light (2500K), Neutral Light (3600K), and White Light (4900K).
- Adjust Brightness (Stepless Dimming): When the lamp is on, long press the control button to smoothly adjust the brightness from 10% to 100% (up to 360 lumens). Release the button when the desired brightness is reached.
- Memory Function: The lamp will remember the last brightness and color temperature setting used when it is turned off and then back on. This function is compatible with smart outlets.

Image: Illustration of the three color temperature options: Warm White (2500K), Natural White (3600K), and White Light (4900K), controlled by a short press of the button.

Image: Illustration of the stepless dimming feature, showing brightness levels from 10% to 100% (Max 360LM) adjusted by a long press of the control button.

Image: The EDISHINE LED Table Lamp illuminating a bedroom, highlighting its 360-degree lighting capability for wider coverage.
Maintenance
- Cleaning: Always unplug the lamp before cleaning. Use a soft, dry cloth to wipe the lamp's surface. Do not use abrasive cleaners, solvents, or harsh chemicals, as these may damage the finish or acrylic.
- Storage: If storing the lamp, ensure it is clean and dry. Store it in a cool, dry place away from direct sunlight and extreme temperatures.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Lamp does not turn on. | No power supply. | Check if the power adapter is securely plugged into both the lamp and the wall outlet. Test the outlet with another device. |
| Light flickers or is unstable. | Loose connection or power fluctuation. | Ensure all connections are secure. Try plugging the lamp into a different outlet. |
| Cannot change color temperature or brightness. | Incorrect operation. | Refer to the "Operating Instructions" section for correct button presses (short press for color, long press for dimming). |
Specifications
| Feature | Detail |
|---|---|
| Model Number | 11743 |
| Product Dimensions | 5.9"D x 5.9"W x 16.93"H |
| Item Weight | 1.7 Pounds |
| Wattage | 6 watts |
| Light Source Type | LED |
| Color Temperature | 2500K (Warm), 3600K (Neutral), 4900K (White) |
| Dimming Range | 10% - 100% (Stepless) |
| Max Brightness | 360 lumens |
| Material Type | Acrylic, Aluminum, Silicone |
| Power Source | Corded Electric |
| Switch Type | Push Button, Dimmer |
| Indoor/Outdoor Usage | Indoor |
Warranty and Support
EDISHINE products are designed and manufactured to the highest quality standards. For information regarding warranty coverage or technical support, please refer to the warranty card included with your product or visit the official EDISHINE website.
If you encounter any issues not covered in this manual, please contact EDISHINE customer support for assistance.





