1. Introduction
This manual provides detailed instructions for the operation and maintenance of your SKMEI Sport Watch Model 9071. This watch is designed with multiple functions including digital world time, stopwatch, alarm, LED light, and 50-meter water resistance, suitable for various activities and daily use.
Image 1.1: Front view of the SKMEI Sport Watch Model 9071, showcasing its digital and analog display.
2. Product Features
The SKMEI Sport Watch Model 9071 offers the following key features:
- Multifunction Sports Watch: Features world time, stopwatch, alarm, LED light, and 50M water resistance.
- Unisex Design: Stylish appearance and comfortable fit suitable for both men and women.
- Versatile for Any Occasion: Complements attire for daily wear, outdoor sports, or business meetings.
- Comfortable Fit: TPU strap is soft and breathable for extended wear.
- Excellent Water Resistance: 50-meter water resistance rating for swimming and daily water exposure.
Image 2.1: Graphic illustrating the watch's functions including World Time, Stopwatch, Week, 5 Alarms, Date, LED Light, WR 50M, 12/24 Hour, DST, and Countdown.
3. Component Identification
Familiarize yourself with the watch's components and buttons:
Image 3.1: Diagram showing the watch case, dial, band, mirror, clasp, and back cover.
Typically, digital watches have four buttons:
- A (Adjust/Light): Used to select settings or activate the backlight.
- B (Mode): Cycles through different modes (Time, Alarm, Stopwatch, World Time, Countdown).
- C (Start/Stop/Reset): Used to start/stop functions or increment values during setting.
- D (Lap/Reset/Decrement): Used for lap times or decrementing values during setting.
Note: Button labels may vary. Refer to the watch face or side for specific markings if available.
4. Setup and Basic Operation
4.1 Initial Setup
Upon first use, remove any protective films from the watch face and back. The watch may already be running. If the display is blank, the battery might be low or in power-saving mode. Press any button to activate.
4.2 Setting Time and Date
- In Timekeeping Mode, press and hold the A (Adjust) button until the seconds begin to flash, indicating setting mode.
- Press the B (Mode) button to cycle through the settings: Seconds → Hour → Minute → Year → Month → Day → 12/24 Hour Format → DST (Daylight Saving Time).
- Use the C (Start/Stop) or D (Lap/Reset) buttons to adjust the flashing value.
- Once all settings are correct, press the A (Adjust) button again to exit setting mode.
4.3 12/24 Hour Format
During time setting, you can select either 12-hour (with P for PM) or 24-hour format. Cycle to the 12/24 hour setting and use the C (Start/Stop) button to toggle between formats.
4.4 Daylight Saving Time (DST)
During time setting, cycle to the DST setting. Use the C (Start/Stop) button to toggle DST ON or OFF. When ON, the time will advance by one hour.
5. Operating Modes
Press the B (Mode) button to cycle through the different operating modes:
Timekeeping Mode → Stopwatch Mode → Alarm Mode → World Time Mode → Countdown Mode → Timekeeping Mode
5.1 Stopwatch Mode
- From Timekeeping Mode, press B (Mode) until "STW" or "STOP" appears on the display.
- Press C (Start/Stop) to start the stopwatch.
- Press C (Start/Stop) again to pause.
- Press C (Start/Stop) to resume, or D (Lap/Reset) to reset to zero while paused.
- To record lap times, press D (Lap/Reset) while the stopwatch is running. The lap time will display briefly, then the stopwatch will continue running.
5.2 Alarm Mode
The watch supports up to 5 alarms. To set an alarm:
- From Timekeeping Mode, press B (Mode) until "ALM" or "ALARM" appears.
- Press C (Start/Stop) to select the alarm number (AL1, AL2, etc.).
- Press and hold A (Adjust) until the alarm hour flashes.
- Use C (Start/Stop) or D (Lap/Reset) to adjust the hour.
- Press B (Mode) to move to the minute setting, then adjust with C (Start/Stop) or D (Lap/Reset).
- Press A (Adjust) to confirm and exit.
- To turn an alarm ON/OFF, in Alarm Mode, select the alarm and press D (Lap/Reset). An alarm icon will appear when active.
- To activate the hourly chime (SIG), in Alarm Mode, press D (Lap/Reset) until "SIG" appears.
5.3 World Time Mode
This mode allows you to view the current time in various major cities around the world.
- From Timekeeping Mode, press B (Mode) until "WT" or "WORLD TIME" appears.
- Use C (Start/Stop) or D (Lap/Reset) to scroll through the available city codes/time zones.
- The display will show the current time for the selected city.
5.4 Countdown Timer Mode
Set a timer to count down from a specified time.
- From Timekeeping Mode, press B (Mode) until "TMR" or "COUNTDOWN" appears.
- Press and hold A (Adjust) until the hour flashes.
- Use C (Start/Stop) or D (Lap/Reset) to set the desired hour, then press B (Mode) to move to minutes, and then seconds.
- Press A (Adjust) to confirm the countdown time.
- Press C (Start/Stop) to start the countdown.
- Press C (Start/Stop) again to pause, and D (Lap/Reset) to reset to the initial countdown time.
5.5 LED Backlight
To illuminate the display in low-light conditions, press the A (Adjust) button (or the dedicated Light button if present). The light will typically stay on for a few seconds.
6. Maintenance
- Cleaning: Wipe the watch case and strap regularly with a soft, dry cloth. For stubborn dirt, use a slightly damp cloth and mild soap, then dry thoroughly. Avoid harsh chemicals.
- Water Resistance: The watch is 50M water resistant. This means it is suitable for swimming, showering, and general water exposure. However, avoid operating buttons underwater to prevent water ingress. Do not expose to hot water or steam, as this can compromise seals.
- Temperature: Avoid exposing the watch to extreme temperatures (hot or cold) for prolonged periods, as this can affect battery life and accuracy.
- Battery Replacement: The watch uses a CR2016 battery. When the display becomes dim or functions are erratic, it may be time for a battery replacement. It is recommended to have the battery replaced by a qualified watch technician to ensure the water resistance seal is properly maintained.
Image 6.1: Back cover of the watch, indicating water resistance (5ATM) and battery type (CR2016).
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Display is blank or dim. | Low battery or power-saving mode. | Press any button to activate. If still dim, replace the battery. |
| Incorrect time/date. | Time not set correctly or accidental adjustment. | Refer to Section 4.2 "Setting Time and Date" to reset. |
| Buttons are unresponsive. | Watch may be in a locked mode or battery is very low. | Try pressing all buttons firmly. If issue persists, replace battery. Avoid pressing buttons underwater. |
| Water inside the watch. | Buttons pressed underwater, or seals compromised. | Immediately take the watch to a professional for inspection and repair to prevent further damage. |
8. Specifications
- Model Number: SKMEI 9071
- Brand: SKMEI
- Water Resistance: 50 meters (5ATM)
- Display Type: Digital and Analog
- Functions: World Time, Stopwatch, Alarm (5), LED Light, 12/24 Hour Format, Date, Week, Countdown, DST
- Battery Type: CR2016
- Strap Material: TPU
- Case Material: Metal
9. Warranty and Support
For warranty information and customer support, please refer to the retailer where you purchased the watch or visit the official SKMEI website. Keep your purchase receipt as proof of purchase.
For further assistance, you may contact SKMEI Official support via their Amazon store: SKMEI Official Store on Amazon.
