BSRCO Handheld Vacuum Cordless Rechargeable - Model ATJ-2166

1. Introduction and Key Features

This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your BSRCO Handheld Vacuum Cordless Rechargeable, Model ATJ-2166. Please read this manual thoroughly before first use and retain it for future reference.

Key Features:

• Deep Cleaning: Equipped with a crevice nozzle and sofa brush for concentrated suction on pet hair and dust in carpets and tight spaces. A flexible hose extends reach.
• USB Charging: Features a 2,000 mAh battery, providing 20 to 30 minutes of power. Fully charges in approximately 3 hours via USB.
• Lightweight Design: Weighs only 1.65 lbs with a 450 ml dust cup, making it effortless to carry and use for quick cleanups in your home or car.
• Built-in LED Light: Illuminates dark areas, ensuring no dust is missed and improving cleaning efficiency, especially at night.

2. Package Contents

Verify that all items listed below are included in your package. If any items are missing or damaged, please contact customer support.

Image: All components of the BSRCO Handheld Vacuum, including the main unit, various nozzles, hose, filter, and charging cable.

• Handheld Vacuum Unit
• Corrugated Hose
• Crevice Nozzle
• Couch Brush
• USB Charge Cable
• Filter (pre-installed)
• Dust Cup (pre-installed)

3. Important Safety Instructions

• Read all instructions before using this appliance.
• Do not use outdoors or on wet surfaces.
• Do not allow to be used as a toy. Close attention is necessary when used by or near children.
• Use only as described in this manual. Use only manufacturer’s recommended attachments.
• Do not use with damaged cord or plug. If appliance is not working as it should, has been dropped, damaged, left outdoors, or dropped into water, return it to a service center.
• Do not pull or carry by cord, use cord as a handle, close a door on cord, or pull cord around sharp edges or corners. Keep cord away from heated surfaces.
• Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.
• Do not handle plug or appliance with wet hands.
• Do not put any object into openings. Do not use with any opening blocked; keep free of dust, lint, hair, and anything that may reduce air flow.
• Keep hair, loose clothing, fingers, and all parts of body away from openings and moving parts.
• Do not pick up anything that is burning or smoking, such as cigarettes, matches, or hot ashes.
• Use extra care when cleaning on stairs.
• Do not use to pick up flammable or combustible liquids, such as gasoline, or use in areas where they may be present.
• Do not pick up toxic material (e.g., chlorine bleach, ammonia cleaner, drain cleaner).
• Do not use in an enclosed space where vapors are given off by oil base paints, paint thinner, some mothproofing substances, flammable dust, or other explosive or toxic vapors.
• Disconnect from electrical outlet before servicing.
• Use only the charger specified by the manufacturer.
• Do not incinerate the appliance even if it is severely damaged. Batteries can explode in a fire.
• Prevent unintentional starting. Ensure the switch is in the off-position before connecting to battery pack, picking up or carrying the appliance.

4. Setup

4.1 Charging the Vacuum

Before first use, fully charge the vacuum for approximately 3 hours. The indicator light will show charging status.

Image: The handheld vacuum unit connected to a USB charger, showing a red light for charging and a green light for fully charged. Also shown charging in a car interior.

• Connect the provided USB charging cable to the vacuum's charging port.
• Plug the other end of the USB cable into a compatible USB power source (e.g., wall adapter, car charger, computer USB port).
• The indicator light will typically show RED during charging and turn GREEN when fully charged.
• Tip: When charging in a vehicle, ensure the vehicle engine is running to avoid draining the car battery.

4.2 Attaching Accessories

Select the appropriate attachment for your cleaning task and firmly attach it to the vacuum's nozzle.

Image: The handheld vacuum demonstrating the use of the corrugated hose for corners, the couch brush for stubborn dirt, and the crevice nozzle for tight spaces.

• Crevice Nozzle: Ideal for reaching narrow gaps, corners, and tight spaces in your car or home.
• Couch Brush: Designed for upholstery, carpets, and removing pet hair or stubborn dirt from fabric surfaces.
• Corrugated Hose: Can be used with the crevice nozzle or couch brush to extend reach and flexibility for awkward angles.

5. Operating Instructions

5.1 Power On/Off

To operate the vacuum, locate the power switch on the handle.

• Slide the power switch to the 'ON' position to start the vacuum.
• Slide the power switch to the 'OFF' position to turn off the vacuum.

5.2 Using the LED Light

The built-in LED light helps illuminate dark areas for thorough cleaning.

Image: The handheld vacuum in use, with its built-in LED light shining on debris on a hard floor, highlighting its effectiveness in dark areas.

• Press the dedicated LED light button (if available, otherwise it may activate with power) to turn the light on or off.
• Use the LED light to easily spot dust and debris under furniture, in car footwells, or other dimly lit areas.

5.3 Cleaning Different Surfaces

Utilize the various attachments for optimal cleaning performance on different surfaces.

Image: The handheld vacuum being used to clean a car interior, demonstrating the use of a flat nozzle for deep crevices and a brush head for uneven surfaces, highlighting its lightweight and minimalist design.

6. Maintenance

6.1 Emptying the Dust Cup

Regularly empty the dust cup to maintain optimal suction power.

• Ensure the vacuum is turned off.
• Locate the dust cup release button or mechanism.
• Press the release and detach the dust cup from the main unit.
• Empty the contents of the dust cup into a trash bin.
• Reattach the dust cup securely until it clicks into place.

6.2 Cleaning the HEPA Filter

The washable HEPA filter should be cleaned regularly to ensure efficient filtration and suction.

Image: The handheld vacuum unit with a visual representation of its HEPA filter being cleaned with water, emphasizing its washable design.

• After emptying the dust cup, carefully remove the HEPA filter.
• Rinse the filter under running water until clean. Do not use harsh detergents.
• Allow the filter to air dry completely for at least 24 hours before reinserting it into the dust cup. Using a wet filter can damage the vacuum.

7. Troubleshooting

If you encounter any issues with your BSRCO Handheld Vacuum, refer to the following table for common problems and solutions.

8. Product Specifications

9. Warranty and Customer Support

BSRCO is committed to providing high-quality products and excellent customer service. If you have any dissatisfaction in the process of using this product, please do not hesitate to contact us at any time. Our customer service staff will be happy to serve you.

For warranty claims, technical assistance, or general inquiries, please refer to the contact information provided on your product packaging or visit the official BSRCO website.