QUTANIX NOAH 2-in-1 Baby Bouncer & Rocker Instruction Manual

Important Safety Information

Please read and understand all instructions before assembly and use of the QUTANIX NOAH 2-in-1 Baby Bouncer & Rocker. Failure to follow these instructions could result in serious injury or death.

• Age and Weight Limit: Suitable for newborns and infants from 0-9 months, up to a maximum weight of 20 lbs (9 kg). Discontinue use when the infant can sit up unassisted or reaches the maximum weight, whichever comes first.
• Harness Use: Always use the 3-point safety harness to secure your baby in the bouncer. Ensure the harness is properly adjusted and snug.
• Supervision: Never leave your child unattended in the bouncer or rocker.
• Placement: Do not place the bouncer on elevated surfaces such as tables or counters. Always use on the floor.
• Hazard Prevention: Keep the bouncer away from stairs, open flames, heaters, and other potential hazards.
• Assembly: Ensure all components are correctly assembled and securely fastened before each use.
• Certifications: This product is ASTM & JPMA certified, ensuring maximum safety standards.

Setup

The QUTANIX NOAH 2-in-1 Baby Bouncer & Rocker comes largely pre-assembled for your convenience. Minimal setup is required.

1. Unfolding the Bouncer: The bouncer arrives in a flat, folded position. To unfold, gently pull the seat upwards until the frame clicks into place, securing the bouncer in its upright position.
2. Attaching the Toy Bar: Locate the detachable toy bar. Align the connectors on the toy bar with the designated slots on the bouncer frame and press firmly until it snaps securely into place. The toy bar can be easily removed when not in use.
3. Adjusting Recline Position: The bouncer features 3 adjustable reclining positions. To adjust, locate the white levers on the sides of the frame. Pull these levers outwards and simultaneously adjust the seat to your desired recline angle. Ensure both sides are locked into position.

Image: The QUTANIX NOAH bouncer shown in both rocking and stationary seat modes. The rocking mode features a gentle curve for movement, while the stationary mode has a kickstand engaged. A baby is shown comfortably seated in both configurations, with a toy bar overhead.

Image: A mother is shown adjusting the recline of the QUTANIX NOAH bouncer with a baby inside. Three inset circles illustrate the 'Lower', 'Middle', and 'Higher' reclining positions, demonstrating the versatility for play and rest.

Operating Instructions

2-in-1 Rocker & Stationary Seat Modes

The NOAH bouncer offers two versatile modes to suit your baby's needs:

• Rocking Mode: In this mode, the bouncer allows for natural rocking motion, either initiated by the baby's movements or a gentle push from a parent. This is ideal for soothing and engaging your baby.
• Stationary Seat Mode: To convert to a stationary seat, locate the kickstand at the base of the bouncer. Pull the kickstand out until it locks into position. This stabilizes the bouncer, preventing rocking, and is perfect for feeding, playtime, or when you need a stable seat. To return to rocking mode, simply push the kickstand back in.

Harness Usage

The bouncer is equipped with a 3-point safety harness to keep your baby secure.

1. Place your baby in the seat.
2. Bring the two side straps over your baby's hips and connect them to the central buckle.
3. Adjust the straps to ensure a snug but comfortable fit. The harness should be tight enough so that you can only fit one finger between the strap and your baby.

Toy Bar Engagement

The detachable toy bar with two engaging toys is designed to stimulate your baby's senses and provide entertainment.

• Ensure the toy bar is securely attached to the bouncer frame.
• The toys are positioned to be within your baby's reach for batting and interaction.
• Remove the toy bar when your baby is sleeping or when it is not needed.

Image: A person is carrying the QUTANIX NOAH bouncer in its folded, compact state, demonstrating its portability. The bouncer folds down to a slim profile, making it easy to transport and store.

Maintenance

Regular cleaning and maintenance will ensure the longevity and hygiene of your QUTANIX NOAH bouncer.

• Fabric Care: Both the seat cover and the newborn insert are removable and machine washable. Use a gentle cycle with cold water and mild detergent. Do not bleach. Tumble dry on low heat or air dry.
• Frame Cleaning: Wipe the frame and plastic components with a damp cloth and mild soap. Dry thoroughly.
• Storage: When not in use, the bouncer can be folded flat for convenient storage. Store in a clean, dry place, ideally in the included tote bag to protect it from dust and dirt.

Image: A detailed view of the QUTANIX NOAH bouncer highlighting its ergonomic design, padded newborn insert, detachable toy bar with two toys, 3-point safety harness, and machine washable fabric. The OEKO-TEX Standard 100 certification is also visible.

Troubleshooting

If you encounter any issues with your QUTANIX NOAH bouncer, please refer to the following common solutions or contact customer support.

• Bouncer not rocking smoothly: Ensure the kickstand is fully retracted for rocking mode. Check for any obstructions under the base.
• Difficulty adjusting recline: Make sure both white levers on the sides of the frame are pulled outwards simultaneously before attempting to adjust the recline.
• Toy bar not staying in place: Verify that the toy bar connectors are properly aligned and snapped securely into the designated slots on the bouncer frame.
• Harness not securing baby: Ensure the straps are correctly threaded through the buckles and adjusted snugly around your baby. Refer to the harness usage instructions.

For any issues not covered here, please contact QUTANIX customer support.

Specifications

Image: A diagram illustrating the product measurements of the QUTANIX NOAH bouncer. Dimensions are provided for the built-up state (21.26"D x 17.32"W x 27.56"H) and the folded state (4.13"D x 17.32"W x 29.53"H), along with the net weight of 8.0 lbs.

Warranty & Support

For warranty information, product support, or to inquire about replacement parts, please contact QUTANIX customer service directly. Keep your purchase receipt and product model number (NOAH, B0F7RYZCDM) handy for faster service.

You can typically find contact information on the product packaging or the official QUTANIX website.