1. Introduction
Thank you for choosing the 4DRC V32 Foam Remote Control Airplane. This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your new aircraft. Please read it thoroughly before first use and retain it for future reference.
The 4DRC V32 is a lightweight and durable foam fighter jet designed for both kids and adults. It features three powerful built-in motors, LED lights for night flying, and various flight modes including 360° flips, stunt rolls, headless mode, and altitude hold. The aircraft comes equipped with three rechargeable batteries for extended flight time.
2. What's in the Box
Carefully unpack the contents and ensure all items are present:
- 1 x 4DRC V32 Foam Remote Control Airplane
- 1 x Remote Control Transmitter
- 3 x 3.7V 350mAh Rechargeable Batteries
- 1 x USB Charging Cable
- 4 x Spare Propellers
- 1 x Instruction Manual
Image: All components included in the 4DRC V32 package.
3. Safety Information
To ensure safe operation and prevent injury or damage, please observe the following safety guidelines:
- Age Recommendation: This product is recommended for users aged 8 years and up. Adult supervision is advised for younger users.
- Flight Environment: Operate the aircraft in open, clear areas, away from people, animals, buildings, trees, power lines, and water. Avoid flying in strong winds.
- Propeller Safety: Keep hands, face, and hair away from rotating propellers. The propellers can cause injury.
- Battery Safety: Use only the provided charging cable and batteries. Do not overcharge or short-circuit batteries. Discontinue use if batteries show signs of damage or swelling.
- Impact Warning: While the foam material is durable, repeated hard impacts can cause damage. Inspect the aircraft for damage after any crash.
4. Setup & Battery Installation
The 4DRC V32 remote control airplane requires no assembly. Follow these steps to prepare for flight:
4.1. Remote Control Battery Installation
- Open the battery compartment on the back of the remote control.
- Insert 3 'C' batteries (included), ensuring correct polarity (+/-).
- Close the battery compartment securely.
4.2. Aircraft Battery Installation & Charging
- Locate the battery compartment on the underside of the aircraft.
- Insert one of the 3.7V 350mAh rechargeable batteries into the compartment and connect it to the aircraft's power connector.
- To charge the aircraft batteries, connect a battery to the USB charging cable, then plug the USB cable into a suitable USB power source (e.g., computer, USB wall adapter). The charging indicator will show charging status.
- Each battery provides approximately 20 minutes of flight time, totaling 60 minutes with all three batteries.
Image: Rechargeable batteries and USB charging cable.
5. Remote Control Overview
Familiarize yourself with the remote control functions before flight:
- Left Joystick: Controls throttle (up/down) and yaw (left/right rotation).
- Right Joystick: Controls pitch (forward/backward) and roll (left/right strafe).
- One-Key Take-off/Landing Button: Initiates automatic take-off or landing.
- Speed Switch Button: Cycles through three speed modes (low, medium, high).
- 360° Flip Button: Activates the 360-degree flip stunt.
- Headless Mode Button: Engages headless mode, simplifying flight orientation.
- Altitude Hold: Maintains a stable altitude automatically.
Image: The remote control for the 4DRC V32 airplane.
Video: Demonstration of the 4DRC Remote Control Plane's features and controls.
6. Operating Instructions
6.1. Pre-Flight Check
- Ensure both the aircraft and remote control batteries are fully charged.
- Choose an open, clear area for flight, free from obstacles and people.
- Verify that all propellers are securely attached and undamaged.
6.2. Pairing the Aircraft and Remote
- Turn on the aircraft. The LED lights will flash.
- Turn on the remote control.
- Push the left joystick (throttle) all the way up, then all the way down. The aircraft's LED lights will stop flashing and remain solid, indicating successful pairing.
6.3. Take-off and Basic Flight
- One-Key Take-off: Place the aircraft on a flat surface. Press the One-Key Take-off button. The aircraft will automatically ascend to a stable hovering height.
- Throttle Control: Use the left joystick to increase (up) or decrease (down) altitude.
- Directional Control: Use the right joystick to move the aircraft forward, backward, left, or right.
- Yaw Control: Use the left joystick left/right to rotate the aircraft horizontally.
Image: The 4DRC V32 airplane in controlled flight.
6.4. Special Flight Features
- 360° Flip & Stunt Roll: While flying, press the 360° Flip button, then move the right joystick in the desired direction to perform an acrobatic flip or roll.
- Headless Mode: Press the Headless Mode button. In this mode, the aircraft's orientation is relative to the pilot, making it easier to control regardless of which way the front of the aircraft is facing.
- Altitude Hold: The aircraft automatically maintains its current altitude, allowing for stable hovering.
- Three Speed Options: Use the Speed Switch button to adjust the flight speed (low for beginners, high for experienced pilots).
- LED Lights: The integrated LED lights enhance visibility and provide an exciting visual experience, especially during evening flights.
Image: Visual representation of 3D flips.
Image: Headless Mode and Altitude Hold features.
Image: Three distinct speed modes for varied flight experiences.
Video: Dynamic flight demonstration of the 4DRC RC Plane.
6.5. Landing
- One-Key Landing: Press the One-Key Take-off/Landing button again. The aircraft will automatically descend and land gently.
- Manual Landing: Slowly lower the left joystick (throttle) to gradually descend the aircraft until it lands.
7. Maintenance
Proper maintenance ensures the longevity and performance of your 4DRC V32 airplane:
- Cleaning: Wipe the aircraft with a soft, dry cloth after use. Avoid using water or harsh chemicals.
- Propeller Replacement: If a propeller is damaged, carefully remove it and replace it with a spare propeller from the package. Ensure the new propeller is securely attached.
- Storage: Store the aircraft and remote control in a cool, dry place, away from direct sunlight and extreme temperatures. Remove batteries from the remote control during long periods of non-use.
8. Troubleshooting
If you encounter issues with your 4DRC V32, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Aircraft does not respond to remote. | Not paired, low batteries, out of range. | Ensure proper pairing (Section 6.2). Check and replace remote/aircraft batteries. Fly within range. |
| Aircraft flies erratically or drifts. | Needs calibration, damaged propeller, strong wind. | Perform a one-click calibration (refer to remote control diagram for button). Replace damaged propellers. Fly in calm conditions. |
| Short flight time. | Batteries not fully charged, old batteries. | Ensure batteries are fully charged before each flight. Consider replacing old batteries if performance degrades significantly. |
| Remote control difficult to sync. | Incorrect pairing sequence, interference. | Follow pairing instructions carefully (Section 6.2). Ensure no other 2.4GHz devices are causing interference. |
9. Specifications
- Product Dimensions: 10 x 2 x 8 inches
- Item Weight: 12.6 ounces
- Item Model Number: 4D-V32-3BAT
- Manufacturer Recommended Age: 8 years and up
- Batteries: 3 x 3.7V 350mAh rechargeable batteries (included for aircraft), 3 x C batteries (included for remote)
- Flight Time: Approximately 20 minutes per aircraft battery
- Control Frequency: 2.4GHz
10. Warranty and Support
For warranty information, technical support, or any questions not covered in this manual, please contact 4DRC customer service through the retailer's platform or the official 4DRC website. Please have your model number (4D-V32-3BAT) and purchase details ready when contacting support.
