KTC H27T22C-3
KTC H27T22C-3 27-Inch 2K QHD Gaming Monitor User Manual
Model: H27T22C-3 | Brand: KTC
1. Introduction
Welcome to the user manual for your new KTC H27T22C-3 27-inch 2K QHD Gaming Monitor. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your monitor to ensure optimal performance and longevity. Please read this manual thoroughly before using the product.
2. What's in the Box
Please verify that all the following items are included in your package:
- Monitor x 1
- Base x 1
- Quick Start Guide (QSG) x 1
- DP Signal Cable x 1
- Adapter x 1
- Power Cord x 1
- Screwdriver x 1
- Screw set x 1
3. Key Features
Your KTC H27T22C-3 monitor is designed to deliver a superior visual and gaming experience with its advanced features:
3.1. High Refresh Rate & Fast Response Time
Experience ultra-smooth visuals with a refresh rate of up to 210Hz, significantly faster than standard 60Hz monitors, reducing motion blur and ghosting. Coupled with a rapid 1ms response time, this monitor ensures seamless and fluid gameplay, giving you a competitive edge in fast-paced games.

Image: High refresh rate and fast response time for smoother gaming.
3.2. Stunning 2K QHD Display
Immerse yourself in extraordinary detail with a 2560 x 1440 (QHD) high-resolution display. The Fast IPS panel offers a wide 131% sRGB color gamut, 1.07 billion colors, HDR 400 support, 450 cd/m² brightness, and a 1000:1 static contrast ratio, delivering clear, vibrant, and stunning visual effects for games, videos, and movies.

Image: Comparison of 2K QHD resolution on the KTC monitor versus a standard FHD monitor.

Image: Visual representation of the Fast IPS panel's color and brightness capabilities.
3.3. Adaptive Sync Technology
With AMD FreeSync and G-Sync compatibility, the monitor minimizes screen tearing, stuttering, and input latency, providing a smooth and synchronized visual experience during intense gaming sessions.

Image: Visual comparison of display with and without Adaptive Sync enabled.
3.4. Built-in Speakers
The monitor features built-in dual 2W speakers, offering convenient audio output for an enhanced gaming atmosphere or general media consumption.

Image: Location of the integrated dual 2W speakers on the monitor's rear.
3.5. Versatile Connectivity
Equipped with multiple input options including two DisplayPort 1.4 (up to 210Hz) and two HDMI 2.0 (up to 144Hz) ports, this monitor allows for flexible connections to various devices such as gaming consoles, PCs, and laptops. It also supports 100mm x 100mm VESA wall mount installation for flexible setup options.

Image: Overview of the monitor's multiple interfaces and VESA mount compatibility.
3.6. Eye Care Features
The monitor incorporates flicker-free technology and a blue light filter to provide extended viewing comfort, reducing eye strain during long hours of gaming, browsing, or working.
4. Setup Guide
4.1. Assembling the Stand
- Carefully remove the monitor and its components from the packaging.
- Attach the monitor base to the stand column using the provided screws and screwdriver.
- Securely attach the assembled stand to the back of the monitor. Ensure all screws are tightened to prevent wobbling.
4.2. Connecting the Monitor
- Connect the power cord to the adapter, then plug the adapter into the monitor's DC input port. Plug the other end of the power cord into a power outlet.
- For optimal performance, connect your PC or gaming console to the monitor using the provided DisplayPort (DP) cable. Alternatively, use an HDMI cable for connection.
- If desired, connect headphones or external speakers to the 3.5mm headphone jack for audio output.
4.3. Initial Power On
Press the power button, typically located on the rear or bottom of the monitor, to turn it on. The monitor should automatically detect the input signal. If not, you may need to manually select the input source via the On-Screen Display (OSD) menu.
5. Operating Instructions
5.1. On-Screen Display (OSD) Navigation
The monitor features a multi-directional joystick button, often integrated with the power button, for navigating the OSD menu. Press the joystick to open the OSD menu, then move it up/down/left/right to select and adjust settings.
5.2. Common OSD Settings
- Brightness: Adjust the overall luminance of the screen.
- Contrast: Control the difference between the brightest and darkest areas of the image.
- Color: Fine-tune color temperature, hue, and saturation.
- Preset Modes: Select pre-configured display modes (e.g., Standard, Game, Movie, FPS, RTS) for optimized viewing experiences.
- Aspect Ratio: Adjust the display's aspect ratio (e.g., Full, 16:9, 4:3).
- Black Equalize: Enhance visibility in dark areas of games without overexposing bright areas.
- Sharpness: Adjust the clarity of image details.
- Input Source: Manually select the active input (HDMI 1, HDMI 2, DP).
5.3. Optimizing for Gaming
For the best gaming experience, ensure your graphics card drivers are up to date. Enable AMD FreeSync or G-Sync in your graphics card control panel and on the monitor's OSD menu to synchronize refresh rates and eliminate screen tearing.
Video: An official KTC video showcasing the 27-inch 2K Gaming Monitor's features and performance in various gaming scenarios.
6. Maintenance
To ensure the longevity and optimal performance of your monitor, follow these maintenance guidelines:
- Cleaning the Screen: Gently wipe the screen with a soft, lint-free cloth. For stubborn marks, lightly dampen the cloth with water or a non-ammonia, non-alcohol based screen cleaner. Never spray liquid directly onto the screen.
- Cleaning the Casing: Use a soft, dry cloth to clean the monitor's casing. Avoid abrasive cleaners.
- Ventilation: Ensure the monitor's ventilation openings are clear and unobstructed to prevent overheating.
- Power Off: Always turn off the monitor when not in use for extended periods.
7. Troubleshooting
If you encounter issues with your monitor, please refer to the following common troubleshooting steps:
| Problem | Possible Cause | Solution |
|---|---|---|
| No Power | Power cable not connected; Power outlet faulty | Ensure power cable is securely connected to monitor and outlet; Test outlet with another device. |
| No Signal | Input cable loose/incorrect; Incorrect input source selected | Check and re-secure HDMI/DP cable connections; Use OSD to select correct input source. |
| Image Flickering/Stuttering | Adaptive Sync not enabled; Graphics driver outdated | Enable FreeSync/G-Sync in OSD and graphics card settings; Update graphics drivers. |
| Abnormal Colors/Greenish Tint | Color settings incorrect; Cable issue | Adjust color settings (Hue, Saturation, Color Temperature) in OSD; Try a different HDMI/DP cable. |
| No Audio | Volume too low; Incorrect audio output selected on PC | Increase monitor volume via OSD; Ensure monitor is selected as default audio output on your computer. |
If the issue persists after trying these steps, please contact KTC customer support for further assistance.
8. Specifications
| Feature | Detail |
|---|---|
| Model Number | H27T22C-3 |
| Screen Size | 27 Inches |
| Resolution | 2560 x 1440 Pixels (2K QHD) |
| Refresh Rate | Up to 210Hz (DP 1.4), 144Hz (HDMI 2.0) |
| Response Time | 1ms |
| Panel Type | Fast IPS |
| Brightness | 450 Candela per Square Meter |
| Contrast Ratio | 1000:1 (Static) |
| Color Gamut | 131% sRGB |
| HDR Support | HDR400 |
| Adaptive Sync | AMD FreeSync & G-Sync Compatible |
| Connectivity | 2x HDMI 2.0, 2x DisplayPort 1.4, 1x USB 2.0 (Data transfer not supported), 1x Headphone Jack |
| VESA Mount | 100mm x 100mm |
| Built-in Speakers | Dual 2W |
| Product Dimensions | 7.28 x 24.25 x 18.3 inches |
| Item Weight | 11.22 pounds |
| Country of Origin | China |
9. Warranty and Support
KTC provides a three-year warranty for this product. For any issues or inquiries regarding your 27-inch gaming monitor, please feel free to contact KTC customer support. We are committed to providing responsive assistance and will endeavor to respond within 12 hours.
For support, please visit the official KTC store on Amazon: KTC Store
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.







