1. Introduction
Thank you for purchasing the G Keni Elegant CD Player Alarm Clock Radio. This device combines a top-loading CD player, FM radio, Bluetooth speaker, MP3/USB music player, and an alarm clock with a wireless charging station. It is designed to provide versatile audio entertainment and convenience for your home. Please read this manual thoroughly before use to ensure proper operation and to maximize your experience with the product.
2. What's in the Box
- 1x G Keni Elegant CD Player Alarm Clock Radio (Model LC-10W)
- 1x Owner's Manual
- 1x AC Power Cord
- 1x Remote Control (2*AAA dry batteries NOT INCLUDED)
3. Product Overview
Familiarize yourself with the main components and controls of your G Keni device.
Figure 3.1: Front view of the G Keni CD Player Alarm Clock with a smartphone charging wirelessly on top and the remote control.
Figure 3.2: Overview of supported playback modes: CD Player, Bluetooth, FM Radio, USB playback, AUX IN, and Headphone playback.
3.1 Front Panel & Display
- Large LED Display: Shows time, FM frequency, mode, and alarm status.
- Control Buttons: Power, Mode, Set, Volume, Skip/Tune, Alarm 1/2, Snooze/Dimmer.
3.2 Top Panel
- CD Compartment: Top-loading mechanism for CDs.
- Wireless Charging Pad: For compatible smartphones.
3.3 Rear/Side Panels
- AC Power Input: Connects to the power adapter.
- FM Antenna: Extendable wire antenna for radio reception.
- USB Port: For MP3/WMA playback from USB drives.
- AUX Input: 3.5mm jack for external audio devices.
- Headphone Output: 3.5mm jack for private listening.
- Battery Compartment: For backup batteries (2*AAA, not included) to retain time settings during power outages.
4. Setup
4.1 Power Connection
- Insert 2 AAA batteries (not included) into the battery compartment on the bottom of the unit. These batteries serve as a backup for time settings during power interruptions.
- Connect the AC power cord to the AC input on the back of the unit, then plug the other end into a standard wall outlet (100V-240V).
- The unit will power on, and the display will illuminate.
4.2 Setting the Time
- Press and hold the SET button until the hour digits begin to blink.
- Press the Forward (▶▶I) or Rewind (I◀◀) button to adjust the hour. Ensure the correct AM/PM indicator is selected if using 12-hour format.
- Press the SET button again. The minute digits will begin to blink.
- Press the Forward (▶▶I) or Rewind (I◀◀) button to adjust the minutes.
- Press the SET button one more time to confirm and save the time.
- To switch between 12-hour and 24-hour format, press the Forward (▶▶I) button while the hour digits are blinking during time setting.
4.3 FM Antenna
For optimal FM radio reception, fully extend the wire antenna located on the back of the unit. Adjust its position for the best signal.
5. Operating Instructions
5.1 CD Playback
Figure 5.1: Inserting a CD into the top-loading compartment.
- Open the CD compartment cover on the top of the unit.
- Place a CD (CD, CD-R/RW, MP3, audio-book) onto the spindle with the label side facing up.
- Close the CD compartment cover.
- Press the MODE button until 'CD' mode is selected. The unit will begin playing automatically.
- Use the Play/Pause (▶II) button to pause or resume playback.
- Use the Forward (▶▶I) or Rewind (I◀◀) buttons to skip tracks. Press and hold to fast forward or rewind within a track.
- Adjust volume using the VOL+ or VOL- buttons.
5.2 Bluetooth Pairing
Figure 5.2: Streaming music from a smartphone via Bluetooth.
- Press the MODE button until 'BT' (Bluetooth) mode is selected. The display will show 'BT' and blink, indicating it's in pairing mode.
- On your smartphone or other Bluetooth-enabled device, enable Bluetooth and search for available devices.
- Select 'G Keni' from the list of devices.
- Once paired, the 'BT' indicator on the display will stop blinking and remain solid. You can now stream audio from your device.
5.3 FM Radio Operation
Figure 5.3: Enjoying FM radio with the G Keni unit.
- Press the MODE button until 'FM' mode is selected.
- Auto Scan: Press and hold the Play/Pause (▶II) button to automatically scan and save available FM stations.
- Manual Tuning: Press the Forward (▶▶I) or Rewind (I◀◀) buttons to manually tune to a specific frequency.
- Preset Stations: Use the CH+ or CH- buttons on the remote control to navigate through saved preset stations.
5.4 USB Playback
- Insert a USB flash drive containing MP3/WMA audio files into the USB port.
- Press the MODE button until 'USB' mode is selected. The unit will automatically detect and begin playing audio files.
- Use the Play/Pause (▶II), Forward (▶▶I), and Rewind (I◀◀) buttons to control playback.
5.5 AUX Input
- Connect an external audio device (e.g., MP3 player, smartphone) to the AUX IN port using a 3.5mm audio cable (not included).
- Press the MODE button until 'AUX' mode is selected.
- Control playback from your connected external device.
5.6 Alarm Clock Functions
Figure 5.4: The alarm clock on a bedside table, also showing wireless charging.
The unit features dual alarms (Alarm 1 and Alarm 2).
- Setting Alarm Time:
a. Press and hold the ALARM 1 or ALARM 2 button until the hour digits blink.
b. Use the Forward (▶▶I) or Rewind (I◀◀) buttons to set the desired hour.
c. Press the ALARM 1 or ALARM 2 button again. The minute digits will blink.
d. Use the Forward (▶▶I) or Rewind (I◀◀) buttons to set the desired minutes.
e. Press the ALARM 1 or ALARM 2 button again to confirm the alarm time. - Selecting Alarm Source:
a. After setting the alarm time, the display will show options for the alarm sound (e.g., BB for Buzzer, TUNE for Radio, CD, USB, BT for Bluetooth).
b. Use the Forward (▶▶I) or Rewind (I◀◀) buttons to select your preferred alarm source.
c. Press the ALARM 1 or ALARM 2 button to confirm the alarm source. - Setting Alarm Volume:
a. After selecting the alarm source, 'V' will blink on the display.
b. Use the Forward (▶▶I) or Rewind (I◀◀) buttons to adjust the alarm volume.
c. Press the ALARM 1 or ALARM 2 button to confirm the alarm volume. - Activating/Deactivating Alarms: Briefly press the ALARM 1 or ALARM 2 button to toggle the alarm on or off. An alarm icon will appear on the display when active.
5.7 Snooze and Sleep Timer
- Snooze: When an alarm sounds, press the SNOOZE/DIMMER button to temporarily silence the alarm for 9 minutes. The alarm will sound again after 9 minutes. This can be repeated within an hour.
- Sleep Timer: While playing audio (Radio, CD, USB, Bluetooth), press the SLEEP button on the remote control repeatedly to cycle through sleep timer options (e.g., 10, 20, 30, 60, 90 minutes, or OFF). The unit will automatically turn off after the selected duration.
5.8 Display Brightness
Press the SNOOZE/DIMMER button (or DIMMER button on the remote) repeatedly to adjust the brightness of the LED display. There are 5 levels of dimmable settings, including an option to turn the display off completely.
5.9 Wireless Charging
Figure 5.5: A smartphone being charged wirelessly on the unit's charging pad.
Place your Qi-enabled smartphone directly onto the wireless charging pad located on the top of the unit. Ensure the phone is centered for optimal charging. The unit supports fast wireless charging (Max 7.5W for iOS, 10W for Android).
5.10 Remote Control Usage
The included remote control provides convenient access to all functions. Insert 2 AAA batteries (not included) into the remote before use. Buttons on the remote mirror most functions available on the unit's front panel, including Power, Mode, Volume, Skip/Tune, Alarm settings, Snooze, Sleep, and Dimmer.
6. Maintenance
- Cleaning: Wipe the unit with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- CD Care: Handle CDs by their edges. Keep them clean and free of scratches.
- Placement: Place the unit on a stable, flat surface away from direct sunlight, heat sources, and moisture. Ensure adequate ventilation.
7. Troubleshooting
If you encounter issues with your G Keni device, please refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Unit does not power on. | Power cord not connected properly. | Ensure the AC power cord is securely plugged into both the unit and a working wall outlet. |
| CD skipping or not playing. | CD is dirty, scratched, or inserted incorrectly. | Clean the CD with a soft, lint-free cloth. Ensure the CD is placed correctly in the compartment. Try a different CD. |
| Poor FM radio reception. | Antenna not extended or positioned poorly. | Fully extend the FM wire antenna and adjust its position for better signal. |
| Bluetooth device not pairing. | Unit not in BT mode or device too far. | Ensure the unit is in 'BT' mode and blinking. Keep your Bluetooth device within 10 meters (33 feet) of the unit. Restart both devices. |
| Wireless charging not working. | Phone not Qi-enabled, misaligned, or case too thick. | Ensure your phone supports Qi wireless charging. Realign the phone on the charging pad. Remove thick phone cases. |
| Alarm did not sound. | Alarm not activated or set incorrectly. | Verify that the alarm is set and activated (alarm icon visible on display). Check alarm time and volume settings. |
8. Specifications
- Model Number: LC-10W
- Product Dimensions: 8.46 x 6.69 x 3.15 inches
- Item Weight: 2.6 pounds
- Connectivity Technology: Auxiliary, Bluetooth, USB
- Speaker Type: Dual Speaker
- Power Input: AC 100V-240V
- Wireless Charging Output: Max 7.5W (iOS), Max 10W (Android)
- FM Frequency Range: 87.5-108MHz
9. Warranty and Support
G Keni provides a one-year warranty for this product from the date of purchase. This warranty covers manufacturing defects and workmanship. It does not cover damage caused by misuse, accidents, unauthorized modifications, or normal wear and tear.
For technical assistance, warranty claims, or customer service inquiries, please contact G Keni customer support. Refer to the contact information provided on the product packaging or the official G Keni website for the most up-to-date support details.
