FIOCCO Electric Pressure Washer User Manual

Product Overview

The FIOCCO Electric Pressure Washer is a powerful and versatile cleaning machine designed for various outdoor tasks. It delivers up to 5000 PSI of water pressure and a flow rate of 3.0 GPM, making it effective for removing stubborn dirt and grime from surfaces like cars, patios, driveways, and fences.

Key features include a Total Stop System (TSS) for energy efficiency and prolonged motor life, a safety lock for secure operation, and a Leakage Protection Plug (GFCI) for enhanced user safety. The unit comes equipped with a 20-foot high-pressure hose, a 35-foot power cord, and a 450ml foam cannon, along with four quick-connect nozzles for diverse cleaning applications.

Safety Information

General Safety Warnings

• Always read and understand the entire instruction manual before operating the pressure washer.
• Wear appropriate personal protective equipment (PPE), including eye protection, hearing protection, and sturdy footwear, during operation.
• Never point the spray gun at people, pets, or electrical devices. The high-pressure spray can cause serious injury.
• Ensure all connections are secure before starting the unit to prevent leaks and maintain pressure.
• Keep children and pets away from the operating area.
• Do not operate the pressure washer in an explosive atmosphere, such as in the presence of flammable liquids, gases, or dust.

Electrical Safety

The FIOCCO Electric Pressure Washer is equipped with a Ground Fault Circuit Interrupter (GFCI) plug for your safety. This device helps protect against electric shock. If the GFCI trips, reset it by pressing the "RESET" button. If it continues to trip, do not use the pressure washer and contact customer support.

• Only connect the pressure washer to a properly grounded outlet.
• Do not use extension cords unless absolutely necessary, and ensure they are rated for outdoor use and the power requirements of the pressure washer.
• Keep the power cord and high-pressure hose away from the cleaning area to prevent damage.

Components and Assembly

Familiarize yourself with the components of your FIOCCO Electric Pressure Washer before assembly and operation. The diagram above illustrates the main parts and their corresponding numbers.

List of Components:

1. Gun Holder
2. Handle
3. Switch
4. Gun
5. Spray Gun
6. Power Cord Hook
7. Detergent Bottle Holder
8. High Pressure Hose
9. Cleaning Pin
10. 4 Nozzles
11. Inlet Filter
12. Screw
13. Soap Bottle

Assembly Steps:

1. Attach the handle to the main unit using the provided screws.
2. Connect the high-pressure hose to the pressure washer's outlet and the spray gun. Ensure connections are tight.
3. Attach the desired quick-connect nozzle to the spray gun.
4. Connect your garden hose to the water inlet of the pressure washer. Important: When installing the inlet fitting, ensure the gold part is facing outward. Incorrect installation may prevent water flow.
5. Plug the GFCI power cord into a suitable electrical outlet.

Operation

Water Connection

Your FIOCCO pressure washer supports two methods for water intake, offering convenience for various cleaning scenarios:

• Faucet Connection: Connect a standard garden hose directly to the pressure washer's water inlet. Ensure the water supply is turned on fully.
• Self-Priming: For situations without a direct faucet, the pressure washer can draw water from a static source like a bucket or barrel. Ensure the water source is clean and free of debris.

Nozzle Selection

The pressure washer includes four quick-connect nozzles, each designed for specific cleaning tasks:

• 0° (Red): Provides a concentrated, high-pressure stream for tough spots and stubborn stains. Use with caution on delicate surfaces.
• 15° (Yellow): A powerful, fan-shaped spray for intense cleaning of hard surfaces like concrete and driveways.
• 25° (Green): A wider fan spray for general cleaning of decks, patios, and fences.
• 40° (White): The widest fan spray, ideal for gentle cleaning of vehicles, windows, and delicate surfaces.
• Soap Nozzle (Black): Used with the foam cannon for applying detergent.

Starting the Pressure Washer

• Ensure the water supply is fully open.
• Squeeze the trigger on the spray gun to purge air from the system until a steady stream of water emerges.
• Turn the pressure washer switch to the "ON" position.
• Release the safety lock on the spray gun and begin cleaning.

Using the Foam Cannon

The 450ml foam cannon allows for effective application of detergents. Fill the soap bottle with appropriate pressure washer detergent. Attach it to the spray gun. Use the black soap nozzle for optimal foam generation. After applying detergent, switch to a rinsing nozzle (e.g., 25° or 40°) to rinse the surface thoroughly.

Total Stop System (TSS) and Safety Lock

The Total Stop System (TSS) automatically shuts off the motor when the trigger is not engaged, saving energy and extending the life of the pump. The safety lock on the spray gun prevents accidental activation, providing an extra layer of protection during breaks in cleaning or storage.

The generous 20-foot high-pressure hose and 35-foot power cord provide ample reach, allowing for "Freedom of Movement" around large objects like vehicles or extensive patio areas without constantly repositioning the main unit.

Official Product Video

Watch the official product video for a visual guide on setting up and using your FIOCCO Electric Pressure Washer:

Maintenance

Regular maintenance ensures the longevity and optimal performance of your pressure washer.

• After Each Use:
  • Turn off the water supply and disconnect the garden hose.
  • Squeeze the spray gun trigger to release any remaining pressure.
  • Disconnect the high-pressure hose and drain any water.
  • Clean the nozzles and store them properly.
  • Wipe down the unit with a damp cloth.
• Seasonal Storage:
  • Drain all water from the pump, hoses, and spray gun to prevent freezing damage.
  • Consider using a pump protector or antifreeze solution if storing in temperatures below freezing.
  • Store the pressure washer in a dry, protected area.
• Inlet Filter Cleaning: Periodically check and clean the inlet filter to prevent debris from entering the pump.

Troubleshooting

If you encounter issues with your pressure washer, refer to the table below for common problems and solutions.

Specifications

Warranty and Support

FIOCCO stands behind the quality of its products. This pressure washer comes with a standard manufacturer's warranty. For detailed warranty information, product support, or to inquire about replacement parts, please visit the official FIOCCO website or contact their customer service department.

You can find more information and contact details by visiting the FIOCCO Store on Amazon.