Important Safety Information
Please read all instructions carefully before assembly and use. Keep this manual for future reference.
- Anti-Tip Kit: Ensure the cabinet is securely anchored to the wall using the provided anti-tip kit. This is crucial for stability and safety, especially in homes with children and pets.
- Weight Limit: Do not exceed the maximum weight limit of 200 lbs (approximately 90 kg) on the tabletop. Overloading can compromise the cabinet's stability and structural integrity.
- Assembly: Assembly requires careful attention. Follow the included assembly guide step-by-step. It is recommended to have two people for assembly due to the item's weight and size.
- Placement: Place the cabinet on a flat, level surface to prevent wobbling and ensure proper door alignment.
Package Contents
Before beginning assembly, verify that all components and hardware are present and undamaged. Refer to the detailed parts list in your included assembly guide.
- Cabinet panels (e.g., top, bottom, side, back panels, doors)
- Adjustable shelves
- Wine glass racks
- Hardware pack (screws, dowels, cam locks, hinges, handles, anti-tip kit)
- Assembly Guide
Setup and Assembly
The Pipishell Fluted Wine Bar Cabinet is designed for straightforward assembly. Follow the step-by-step instructions provided in the separate assembly guide included with your product. All parts are labeled for easy identification.
- Preparation: Clear a spacious area for assembly. Lay out all components on a soft, clean surface to prevent scratches.
- Follow Guide: Refer to the detailed illustrations and instructions in the assembly guide for each step.
- Secure Connections: Ensure all screws and fasteners are tightened securely, but do not overtighten.
- Adjustable Shelves: Install the adjustable shelves into the desired positions. The cabinet features three levels for shelf height adjustment.
- Wine Glass Racks: Attach the wine glass racks as indicated in the assembly guide.
- Anti-Tip Kit Installation: Crucially, install the anti-tip kit according to the instructions to anchor the cabinet to the wall. This prevents accidental tipping.
Operating Instructions / Usage
The Pipishell Fluted Wine Bar Cabinet offers versatile storage and display options for various household needs.
- Storage Flexibility: Utilize the two open shelves and six spacious compartments. The adjustable shelves can be set at three different levels to accommodate items of varying heights, such as liquor bottles, dishes, or books.
- Wine Glass Storage: The middle rack includes three holders designed to store up to nine wine glasses securely.
- Top Surface Use: The 47.2-inch wide top surface is suitable for placing coffee makers, microwaves, decorative accents, or other kitchen and living room essentials. Ensure the total weight does not exceed 200 lbs.
- Multi-Functional Design: This cabinet can serve various roles, including a wine bar cabinet, coffee station, console table, TV stand, hallway storage, or a general kitchen cupboard, adapting to your specific needs.
Maintenance and Care
Proper care will ensure the longevity and appearance of your Pipishell Fluted Wine Bar Cabinet.
- Cleaning: The cabinet's surface is scratch-resistant and waterproof. For routine cleaning, wipe with a soft, damp cloth. Avoid using abrasive cleaners, harsh chemicals, or solvents, as these can damage the finish.
- Spills: Promptly wipe up any spills to prevent water damage, especially on the edges and seams.
- Sunlight Exposure: Avoid prolonged direct sunlight exposure, which can cause fading or discoloration over time.
- Heat: Do not place hot items directly on the surface. Use coasters or protective pads.
- Stability Check: Periodically check all fasteners and connections to ensure they remain tight. Re-tighten if necessary.
Troubleshooting
If you encounter any issues with your Pipishell Fluted Wine Bar Cabinet, consider the following common solutions:
- Wobbling Cabinet: Ensure the cabinet is placed on a level surface. Check that all assembly screws are fully tightened. Verify the anti-tip kit is correctly installed and secured to the wall.
- Doors Not Aligning: Adjust the hinges on the doors if they are not closing properly or are misaligned. Refer to the assembly guide for hinge adjustment instructions.
- Missing Parts/Damaged Components: If you find any parts missing or damaged upon opening the package, do not proceed with assembly. Contact customer support immediately for assistance.
- Difficulty Assembling: Review the assembly guide carefully. Ensure you are using the correct hardware for each step. Sometimes, a second person can help identify overlooked details or provide assistance with heavier components.
Specifications
| Feature | Detail |
|---|---|
| Brand | Pipishell |
| Model Name | AMSCA03G-US |
| Color | Grey |
| Overall Dimensions (W x H x D) | 47.2" x 35" x 15.5" (120 cm x 89 cm x 39.4 cm) |
| Item Weight | 108 pounds (49 kg) |
| Weight Limit (Tabletop) | 200 pounds (90 kg) |
| Frame Material | CARB P2-certified engineered wood |
| Top Material Type | Engineered Wood |
| Number of Shelves | 8 (including fixed and adjustable) |
| Number of Compartments | 6 |
| Adjustable Shelf Levels | 3 |
| Special Feature | Fluted Design, Wine Glass Racks |
| Assembly Required | Yes |
| Mounting Type | Floor Mount (with anti-tip kit for wall anchoring) |
| UPC | 840478825497 |
Warranty Information
Specific warranty details for the Pipishell Fluted Wine Bar Cabinet are typically provided with your purchase documentation or can be found on the manufacturer's official website. Please retain your proof of purchase for any warranty claims.
Customer Support
For further assistance, questions, or to report missing/damaged parts, please contact the retailer where you purchased this product or visit the official Pipishell website for customer service contact information.
