Introduction
This manual provides detailed instructions for the assembly, operation, and maintenance of your VASAGLE LNT135KD01 Console Table. Please read carefully before beginning assembly and retain for future reference.
Image: The VASAGLE LNT135KD01 Console Table, showcasing its rustic brown and ink black design in a home environment.
Safety Information
Please observe the following safety guidelines to prevent injury or damage to the product:
- Do not place heavy objects on the shelves that exceed the recommended weight limits (30 kg on the top shelf and 20 kg on the bottom shelf).
- Ensure the table's adjustable feet are properly set to maintain stability on uneven floors and prevent potential injuries.
- Follow the provided assembly instructions for safe and correct installation.
- Always use the included anti-tip kit to secure the table to a wall, especially in households with children or pets.
Image: Technical diagram illustrating the console table's dimensions (80 cm length, 20 cm width, 80 cm height) and maximum weight capacities for the top (30 kg) and bottom (20 kg) shelves.
Package Contents
Before assembly, verify that all components listed below are present. If any parts are missing or damaged, please contact customer support.
- Top Panel (with integrated power strip)
- Bottom Shelf Panel
- Side Frames (Left & Right)
- Crossbars/Support Beams
- Adjustable Feet
- Anti-Tip Kit (Strap, Screws, Wall Anchors)
- Assembly Hardware (Screws, Washers, Nuts)
- Allen Key / Wrench
- Instruction Manual
Setup and Assembly Instructions
The VASAGLE LNT135KD01 console table is designed for straightforward assembly. Follow the numbered steps and diagrams provided in your physical instruction booklet for detailed guidance. Key features for assembly and stability include:
- Numbered Parts: All components are clearly labeled for easy identification, simplifying the assembly process.
- Adjustable Feet: Ensure the table is stable on uneven surfaces by adjusting the feet at the base of the frame. Turn clockwise to shorten, counter-clockwise to lengthen.
- Anti-Tip Kit: For enhanced safety, especially in households with children or pets, attach the included anti-tip kit to secure the table to a wall. Refer to the diagram in your physical manual for proper installation steps.
Image: Close-up views demonstrating the easy-to-clean surface, the anti-tip kit installation point, and the adjustable feet mechanism for leveling the table.
Operating Instructions
Your VASAGLE LNT135KD01 console table features an integrated power strip for convenient charging and power access. Follow these guidelines for safe operation:
- Power Connection: Plug the table's power cord securely into a standard, grounded wall outlet.
- AC Outlets: Two (2) AC outlets are provided, rated at 250V/16A. Use these for lamps, small appliances, or other electronic devices.
- USB Ports: One (1) USB-A port and one (1) USB-C port are available, both providing 5V/2A output. These are suitable for charging smartphones, tablets, and other USB-powered devices.
- Important: Do not exceed the maximum load capacity of the power strip. Avoid plugging in high-power appliances that may draw excessive current simultaneously, as this can lead to overheating or circuit overload.
Image: Detailed view of the integrated power strip, highlighting the specifications for the two AC outlets (250V/16A) and the USB-A and USB-C ports (5V/2A each).
Maintenance
Proper maintenance will help extend the life and preserve the appearance of your console table:
- Cleaning: Wipe surfaces with a soft, slightly damp cloth. Avoid using abrasive cleaners, harsh chemicals, or solvents, as these can damage the finish. The surface is designed to be easy to clean.
- Stability Check: Periodically check all screws, bolts, and connections to ensure they remain tight. Re-tighten if necessary to maintain structural integrity.
- Adjustable Feet: Re-adjust the leveling feet as needed to maintain stability, especially if the table is moved or if floor conditions change.
Troubleshooting
If you encounter any issues with your console table, refer to the following common solutions:
- Table is wobbly:
- Ensure all assembly screws are fully tightened.
- Adjust the leveling feet on the bottom of the legs to compensate for uneven floors. - Power outlets or USB ports not working:
- Verify that the main power cord is securely plugged into a functional wall outlet.
- Check if the total power draw of connected devices exceeds the power strip's maximum capacity (250V/16A). Unplug some devices if overloaded.
- Try plugging a device directly into the wall outlet to confirm the wall outlet is working correctly. - Missing parts or damaged components:
- Review the package contents list. If parts are missing or damaged upon arrival, contact VASAGLE customer support for assistance.
Specifications
| Feature | Detail |
|---|---|
| Brand | VASAGLE |
| Model | LNT135KD01 |
| Color | Rustic Brown + Ink Black |
| Dimensions (L x W x H) | 80 x 20 x 80 cm |
| Product Weight | 6.5 kg |
| Material | Particleboard, Steel Frame |
| Max. Load Capacity (Top Shelf) | 30 kg |
| Max. Load Capacity (Bottom Shelf) | 20 kg |
| AC Outlets | 2 (250V/16A) |
| USB-A Port | 1 (5V/2A) |
| USB-C Port | 1 (5V/2A) |
Warranty and Support
For warranty information, technical support, or assistance with missing/damaged parts, please refer to the documentation included with your purchase or contact VASAGLE customer support directly through their official website or the retailer where the product was purchased. Please have your model number (LNT135KD01) and purchase date available when contacting support.
