1. Introduction
Thank you for choosing the ASD LED Security Flood Light Outdoor. This manual provides essential information for the safe installation, operation, and maintenance of your new flood light. Please read it thoroughly before installation and keep it for future reference.
This 20W LED flood light features 5 selectable color temperatures (2700K-5000K), rotatable heads for precise illumination, and is designed for wired outdoor applications. It is UL and DLC Premium certified, ensuring high performance and safety in wet locations (IP65).
2. Safety Information
WARNING: Risk of electric shock. Disconnect power at the fuse or circuit breaker before installation or servicing.
- Ensure the electrical rating of the fixture is compatible with your power supply.
- All wiring connections must be in accordance with local and national electrical codes.
- If you are not familiar with electrical wiring, consult a qualified electrician.
- Do not install on surfaces that are unstable or prone to vibration.
- Do not look directly into the LED light source when illuminated.
- This fixture is rated for wet locations (IP65). Ensure all connections are properly sealed to maintain this rating.
3. Package Contents
Verify that all components are present before beginning installation:
- ASD LED Security Flood Light Fixture
- Mounting Hardware (screws, wire nuts, gasket)
- Instruction Manual
4. Product Features
- Adjustable Light Heads: Features 150° side-to-side and 180° up-and-down rotatable light heads for precise illumination direction.
- 5 Color Temperature Options (5CCT): Selectable color temperatures from 2700K (Soft White) to 5000K (Daylight) to suit various needs.
- Durable and Certified: UL and DLC Premium certifications ensure high performance and safety. IP65 rated for wet locations, providing resistance against harsh weather.
- Long Lifespan: Boasts an impressive lifespan of 145,000 hours.
- Energy Efficient: Operates on 120V circuits, reducing electricity costs.
Figure 4.1: Rotatable Light Heads for Directional Control
Figure 4.2: 5 Color Temperature Options
Figure 4.3: IP65 Wet Locations Rated
5. Specifications
| Specification | Value |
|---|---|
| Brand | ASD |
| Model Number | A-SFL2-20BK |
| Wattage | 20 watts |
| Brightness | 2045 lumens |
| Color Temperature | 2700K-5000K (5CCT Selectable) |
| Voltage | 120 volts |
| Material | Aluminum, Polycarbonate |
| Water Resistance Level | IP65 (Wet Locations Rated) |
| Lifespan | 145,000 hours |
| Mounting Type | Ceiling Mount, Wall Mount |
| Certifications | UL, DLC Premium |
Figure 5.1: Product Dimensions and Key Specifications
6. Installation Instructions
This flood light is designed for easy installation on a standard junction box. Professional installation is recommended.
6.1 Before You Begin
- Turn off power: Locate the circuit breaker or fuse box and turn off the power to the area where you will be installing the light.
- Prepare the mounting surface: Ensure the junction box is securely mounted and the wiring is accessible.
6.2 Wiring and Mounting
- Attach the mounting bracket to the junction box using the provided screws.
- Connect the electrical wires:
- Connect the black wire from the fixture to the black (live) wire from the junction box.
- Connect the white wire from the fixture to the white (neutral) wire from the junction box.
- Connect the green (ground) wire from the fixture to the green or bare copper (ground) wire from the junction box.
- Carefully tuck the wires into the junction box.
- Align the fixture with the mounting bracket and secure it with the provided screws. Ensure the gasket is properly seated to maintain the IP65 rating.
- Restore power at the circuit breaker.
Figure 6.1: Installation on a Regular Junction Box
7. Operating Instructions
7.1 Adjusting Light Heads
The light heads can be rotated 150 degrees side-to-side and 180 degrees up-and-down. Loosen the adjustment screws on the side of each light head, position the heads to your desired angle, and then tighten the screws firmly to secure them.
7.2 Selecting Color Temperature (CCT)
The flood light features a selectable color temperature switch, usually located on the back or side of the fixture. Before final installation or by carefully accessing the switch, select your preferred color temperature (2700K, 3000K, 3500K, 4000K, or 5000K) by sliding the switch to the desired setting.
8. Maintenance
The ASD LED Security Flood Light requires minimal maintenance.
- Cleaning: Ensure power is off before cleaning. Wipe the fixture with a soft, damp cloth. Do not use abrasive cleaners or solvents.
- Inspection: Periodically check the fixture for any signs of damage, loose connections, or wear. Address any issues promptly.
- LEDs are not user-replaceable. Do not attempt to open the sealed light heads.
9. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on | No power supply Loose wiring Faulty fixture | Check circuit breaker/fuse Verify all wire connections are secure Contact customer support if power and wiring are correct |
| Light flickers | Loose wiring Incompatible dimmer (if applicable) | Check all wire connections Ensure a compatible LED dimmer is used, or remove dimmer if not needed |
| Incorrect color temperature | CCT switch set incorrectly | Adjust the CCT selector switch on the fixture to the desired setting |
10. Warranty and Support
ASD provides a 5-year warranty on this product, ensuring top quality and safety. This product is UL and DLC Premium certified, allowing for participation in rebates offered by most states.
For technical support, warranty claims, or any questions regarding your ASD LED Security Flood Light, please contact ASD Lighting Corp customer service.
Figure 10.1: Quality and Warranty Information