1. Introduction
This manual provides essential information for the safe and efficient installation, operation, and maintenance of your Hansgrohe Bidette Hand Shower Set 29233000. This product is designed for use with hot water and features EcoSmart technology for water efficiency and QuickClean for easy maintenance. Please read these instructions thoroughly before beginning installation or use.
2. Safety Information
- Ensure all water supply lines are turned off before installation.
- Installation must be performed by a qualified professional in accordance with local plumbing codes.
- This product is designed for hot water use. Verify your water supply is compatible.
- Warning: This product does not include backflow prevention. It is not suitable for use in countries where the EN 1717 standard is in force, which requires backflow prevention.
- Protect the product from frost.
3. Package Contents
Verify that all components are present before beginning installation:
- Bidette Hand Shower
- Stop Valve with Integrated Shower Holder
- Shower Hose (1.25 m)
- Mounting Material
- Assembly Instructions
4. Setup and Installation
The Hansgrohe Bidette Hand Shower Set 29233000 is designed for wall mounting with a single hole installation. Ensure the installation surface is suitable and secure.
Figure 1: Hansgrohe Bidette Hand Shower Set 29233000. This image shows the complete product, including the hand shower, stop valve, and hose, as it would appear after installation.
For precise installation, refer to the technical drawing provided with your product. Key dimensions for installation are:
- Total height from wall connection to top of hand shower: 154 mm
- Projection from wall to front of hand shower: 117 mm
- Wall connection plate diameter: 76 mm
- Shower hose length: 1250 mm (1.25 m)
The minimum required water pressure for optimal function is 1 bar.
- Prepare the Installation Area: Ensure the wall surface is clean, dry, and structurally sound. Mark the desired position for the single mounting hole.
- Drill Hole: Drill the necessary hole according to the provided mounting template and secure the wall plug.
- Connect Water Supply: Connect the hot water supply line to the stop valve. Ensure all connections are watertight.
- Mount the Stop Valve: Secure the stop valve with the integrated shower holder to the wall using the provided mounting material.
- Attach Shower Hose: Connect the 1.25 m shower hose to the stop valve and to the bidette hand shower.
- Test for Leaks: Slowly turn on the main water supply and check all connections for leaks.
5. Operating Instructions
The Hansgrohe Bidette Hand Shower Set 29233000 is designed for simple operation.
- Water Flow Activation: The set includes a stop valve. To activate water flow, press the button or lever on the hand shower. Release to stop the flow.
- EcoSmart Function: This hand shower features EcoSmart technology, providing a single, water-saving jet type. This optimizes water consumption without compromising performance.
- Hot Water Use: This product is specifically designed for use with hot water.
6. Maintenance
Regular cleaning and maintenance will ensure the longevity and optimal performance of your Hansgrohe Bidette Hand Shower Set.
- QuickClean Feature: The hand shower is equipped with QuickClean nozzles. Limescale deposits can be easily removed by gently rubbing the silicone nozzles with your finger.
- General Cleaning: Clean the chrome surfaces with a soft cloth and a mild, non-abrasive cleaning agent. Avoid using cleaners containing alcohol, hydrochloric acid, formic acid, acetic acid, or phosphoric acid, as these can damage the finish.
- Hose Maintenance: Periodically check the shower hose for any signs of wear or damage. Replace if necessary.
7. Troubleshooting
If you encounter issues with your hand shower set, refer to the following common solutions:
- Low Water Flow: Check if the main water supply is fully open. Inspect the hand shower nozzles for limescale buildup and clean using the QuickClean feature. Ensure the minimum pressure of 1 bar is met.
- Leaks: Tighten all connections carefully. If leaks persist, check the seals and O-rings for damage and replace if necessary.
- No Water Flow: Ensure the stop valve is open. Check the main water supply.
For persistent issues, contact Hansgrohe customer support or a qualified plumber.
8. Specifications
| Feature | Specification |
|---|---|
| Model Number | 29233000 |
| Product Dimensions (L x W x H) | 11.7 x 8.4 x 19.2 cm |
| Weight | 1.39 kg |
| Material | Metal |
| Finish | Polished Chrome |
| Color | Chrome |
| Installation Method | Wall Mount, Single Hole |
| Shower Head Size | 28 mm |
| Number of Jet Types | 1 (EcoSmart) |
| Maximum Flow Rate (at 3 bar) | 6.2 l/min |
| Minimum Operating Pressure | 1 bar |
| Special Features | EcoSmart, QuickClean, Stop Valve |
| Shower Hose Length | 1.25 m |
| Spare Parts Availability | 15 Years |
9. Warranty Information
Hansgrohe products are manufactured to high-quality standards. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Hansgrohe website. Spare parts for this model are available for up to 15 years from the date of purchase.
10. Support
Should you require further assistance, technical support, or have questions regarding your Hansgrohe Bidette Hand Shower Set 29233000, please contact Hansgrohe customer service. Contact details can typically be found on the official Hansgrohe website or in the product packaging.
Online Resources: www.hansgrohe.com
