Introduction
Thank you for choosing the Fitop Bathroom Exhaust Fan with Light. This unit is designed to provide efficient ventilation and illumination for your bathroom, ensuring a fresh and comfortable environment. It features a powerful 110 CFM airflow, ultra-quiet 1.0 Sones operation, and a versatile LED light with adjustable color temperatures and a nightlight function. Please read this manual thoroughly before installation and use to ensure safe and optimal performance.
Safety Information
WARNING: To reduce the risk of fire, electric shock, or injury to persons, observe the following:
- Installation work and electrical wiring must be done by qualified person(s) in accordance with all applicable codes and standards, including fire-rated construction codes and standards.
- Sufficient air is needed for proper combustion and exhausting of gases through the flue (chimney) of fuel-burning equipment to prevent back-drafting. Follow the heating equipment manufacturer’s guideline and safety standards such as those published by the National Fire Protection Association (NFPA), and the American Society for Heating, Refrigeration and Air Conditioning Engineers (ASHRAE), and the local code authorities.
- When cutting or drilling into wall or ceiling, do not damage electrical wiring and other hidden utilities.
- Ducted fans must always be vented to the outdoors.
- This unit must be grounded.
- Do not use this fan with any solid-state speed control device.
Package Contents
- Fitop Bathroom Exhaust Fan Unit
- LED Light Kit (integrated)
- Installation Hardware (screws, wire nuts)
- Instruction Manual
Specifications
| Brand | Fitop |
| Model Name | YSF-100C2 |
| Air Flow Capacity | 110 Cubic Feet Per Minute (CFM) |
| Noise Level | 1.0 Sones |
| Wattage | 43 Watts |
| Voltage | 120 Volts (AC) |
| LED Light Output | 1300 Lumens |
| Color Temperatures | 2700K (Warm White), 4000K (Bright White), 6500K (Cool White) |
| Nightlight | 2W Soft Night Light |
| Ceiling Cutout Dimensions | 7.75" L × 7.5" W × 5.75" H |
| Light Housing Dimensions | 10.25" × 10.25" |
| Duct Diameter | 4" Standard |
| Material | Galvanized Steel Housing, Zinc Alloy Frame, PC Diffuser |
| Certifications | ETL Certified |
Setup and Installation
This exhaust fan is designed for hassle-free ceiling mounting. Ensure power is OFF at the circuit breaker before beginning installation.
1. Prepare the Ceiling Opening
Confirm your ceiling opening and duct size before purchase. The required ceiling cutout is 7.75" L × 7.5" W × 5.75" H. The light housing measures 10.25" × 10.25", and the duct requires a standard 4" diameter.
This image illustrates the required ceiling cutout dimensions (7.75" L x 7.5" W x 5.75" H) and the light housing size (10.25" x 10.25") for proper installation. The duct requires a standard 4" diameter.
2. Mount the Fan Housing
Mount the fan housing directly to ceiling joists using nails or screws. Ensure the housing is securely fastened.
3. Connect Ductwork
Connect the 4-inch duct to the fan's exhaust port. Secure the connection with duct tape or a clamp to prevent air leaks.
4. Electrical Wiring
Open the junction box cover. Connect the black, white, and green (ground) wires from your household wiring to the corresponding wires on the fan unit. Secure connections with wire nuts. The fan and light have separate wire connections, allowing for control with a single or dual wall switch.
This diagram shows how to connect the fan and light to a single or dual wall switch setup. Ensure all connections are secure and follow local electrical codes.
5. Install Light Cover
Once wiring is complete and secured, attach the LED light cover to the fan housing. Restore power at the circuit breaker.
Installation Video Reference
Official product video demonstrating the features and appearance of the Fitop Bathroom Exhaust Fan with Light, including installation overview.
A short video demonstrating the ease of installation and quiet operation of the fan.
Operating Instructions
Fan Operation
The exhaust fan operates by turning on the connected wall switch. It provides 110 CFM airflow to quickly remove moisture and odors from your bathroom.
The fan provides 110 CFM airflow with 360-degree air intake for efficient ventilation, suitable for rooms up to 110 sq. ft.
The fan effectively removes moisture and steam, preventing fogged mirrors and keeping the bathroom dry and fresh.
Operating at an ultra-quiet 1.0 Sones, the fan provides effective ventilation with minimal noise, comparable to a whisper.
Light Operation and Color Temperature Settings
The integrated LED light offers four lighting options: three adjustable color temperatures and a soft nightlight. You can switch between these modes using your standard wall switch.
- Cycling Modes: Turn the wall switch OFF and ON quickly to cycle through the available light modes (2700K, 4000K, 6500K, Nightlight).
- Memory Function: The fan includes a power-off memory function. If the light is left OFF for more than 3 seconds, it will automatically save the last selected color temperature or nightlight setting for the next time it is turned ON.
The fan's LED light offers three color temperature settings: 2700K (warm white), 4000K (bright white), and 6500K (cool white). These can be cycled using a standard wall switch.
A soft 2W nightlight mode is available, easily activated via the wall switch, providing subtle illumination.
Maintenance
Regular maintenance helps ensure the longevity and optimal performance of your exhaust fan. Always disconnect power at the circuit breaker before performing any maintenance.
Cleaning the Light Cover
Wipe the LED light cover with a soft, damp cloth. Do not use abrasive cleaners or solvents, as these may damage the finish or diffuser.
Cleaning the Fan Grille and Interior
Periodically remove the light cover to access the fan grille. Use a vacuum cleaner with a brush attachment to remove dust and debris from the grille and fan blades. For deeper cleaning, wipe surfaces with a damp cloth. Ensure all parts are dry before reassembling and restoring power.
Troubleshooting
If you experience issues with your Fitop Bathroom Exhaust Fan, refer to the following common troubleshooting steps:
- Fan or Light Not Working:
- Check if the circuit breaker is ON.
- Ensure all electrical connections are secure and correctly wired.
- Verify that the wall switch is functioning correctly.
- Fan is Noisy:
- Ensure the fan housing is securely mounted to the ceiling joists. Loose mounting can cause vibrations.
- Check for any obstructions in the fan blades or exhaust duct.
- Clean the fan blades and grille from dust and debris.
- Light Color Not Changing:
- Ensure you are cycling the wall switch OFF and ON quickly to change modes.
- If the light remains on a single setting, the memory function may have engaged. Try cycling the switch several times.
- Poor Airflow:
- Check for blockages in the exhaust ductwork.
- Ensure the duct connection to the fan is sealed properly.
- Clean the fan grille and blades.
If problems persist after following these steps, please contact customer support.
Warranty and Support
Fitop products are manufactured to high-quality standards and are warranted against defects in materials and workmanship. For specific warranty details, please refer to the warranty card included with your purchase or contact Fitop customer support. If you have any questions, require technical assistance, or need to report a defect, please contact our customer service team through the retailer where the product was purchased or visit the official Fitop website for support contact information.
