1. Introduction
Thank you for choosing the PALONE Electric Bug Zapper. This device is designed to effectively control flying insects both indoors and outdoors using ultraviolet light attraction and high-voltage electrocution. Please read this manual thoroughly before operation to ensure safe and optimal performance.
2. Important Safety Instructions
- High Voltage: The internal grid operates at 4500V. Do not touch the internal electric grid. The outer casing is designed to prevent accidental contact.
- Children and Pets: Keep the device out of reach of children and pets. The protective grid spacing (0.26 inch interval) is designed to prevent fingers from reaching the high-voltage grid.
- Power Supply: This is a plug-and-play device. Ensure the voltage provided by the power supply is stable to prevent damage. Do not use with damaged cords or plugs.
- Water Exposure: The device features an IPX4 waterproof design, allowing outdoor use in rain. However, it must not be fully immersed in water.
- Cleaning: Always unplug the device before cleaning. Use the provided brush to remove dead insects. Do not rinse the main unit with water directly, only the collection tray.
- Maintenance: Do not attempt to repair or modify the device yourself. Refer to qualified service personnel for any repairs.
- Placement: For optimal effect, place the mosquito zapper at a height of 20-100 cm (approximately 0.65-3.3 feet) in the room or area of use.
3. Package Contents
- PALONE Electric Bug Zapper (Model LT-806)
- Removable Insect Collection Tray
- Cleaning Brush
- User Manual
4. Product Overview

Figure 1: PALONE Electric Bug Zapper (Model LT-806)
The PALONE Electric Bug Zapper is designed for efficient insect control. It features a durable ABS plastic shell, a sturdy top hook for hanging, and a 3.9ft PVC power cord for flexible placement. The device emits 365NM ultraviolet light to attract insects, which are then eliminated by a 4500V high-voltage grid. Dead insects fall into a removable collection tray for easy disposal.

Figure 2: Key Components of the Bug Zapper. Includes sturdy top hook, lamp to attract mosquitoes, 4500V electric shock net, convenient bottom tray, and ABS high-strength shell protection.
Key Features:
- 4500V High-Voltage Grid: Ensures quick and effective insect elimination.
- 365NM UV Light: Attracts mosquitoes, flies, gnats, and moths.
- IPX4 Waterproof: Suitable for both indoor and outdoor use, even in light rain.
- Safety Design: Outer protective grid prevents accidental contact with the high-voltage internal grid.
- Easy Cleaning: Removable collection tray for simple disposal of dead insects.
- Versatile Placement: Features a sturdy top hook for hanging and a flat base for tabletop use.
- Wide Coverage: Effective for areas up to 100 square feet.
5. Setup
- Unpack: Carefully remove the bug zapper and all accessories from the packaging.
- Placement:
- Indoor Use: Place the zapper in a room where insects are present. For best results, position it away from other light sources and at a height of 20-100 cm (0.65-3.3 feet) from the floor. It is recommended to operate the zapper for 6 hours before bedtime in a bedroom.
- Outdoor Use: Hang the zapper using the sturdy top hook or place it on a stable surface. Ensure it is within reach of a power outlet. The 3.9ft PVC wire provides flexibility. While waterproof, avoid full immersion in water.
- Connect Power: Plug the device directly into a standard electrical outlet. The device is plug-and-play and does not require batteries.
- Power On: The device will illuminate upon plugging in. There is no separate on/off switch; it operates when connected to power.

Figure 3: Bug Zapper placed on a table, highlighting the 3.9ft PVC wire.
6. Operation
Once plugged in, the PALONE Electric Bug Zapper will emit ultraviolet light, attracting flying insects. Upon contact with the internal high-voltage grid, insects are instantly zapped and fall into the removable collection tray at the bottom of the unit.
Optimal Usage Tips:
- For best results, operate the zapper in dark environments, as other light sources can reduce its effectiveness.
- Avoid placing the zapper directly next to people or food, as it attracts insects. Position it a few feet away from your immediate area.
- Allow the zapper to run continuously during periods of high insect activity.

Figure 4: The bug zapper effectively attracts and eliminates mosquitoes, gnats, flies, and moths.

Figure 5: The bug zapper is suitable for use in bedrooms, living rooms, patios, and offices.
7. Maintenance
Regular cleaning ensures the longevity and effectiveness of your bug zapper.
- Disconnect Power: Always unplug the bug zapper from the power outlet before performing any maintenance.
- Empty Collection Tray: Rotate and pull out the removable tray at the bottom of the unit.
- Clean Tray: Use the provided cleaning brush to sweep dead insects from the tray. The tray can be rinsed with water and allowed to dry completely before reattaching.
- Clean Grid: Gently use the cleaning brush to remove any insects stuck to the high-voltage grid. Do not use water or metal objects on the grid.
- Reassemble: Once the tray is clean and dry, reattach it to the bottom of the unit by aligning and twisting it into place.

Figure 6: Step-by-step guide for cleaning the insect collection tray.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Zapper not turning on. | Not plugged in correctly; Power outage; Damaged cord/plug. | Ensure the device is securely plugged into a working outlet. Check household circuit breaker. Inspect cord/plug for damage; do not use if damaged. |
| Insects not being zapped effectively. | Internal grid is dirty; Too much ambient light; Incorrect placement. | Clean the internal grid with the provided brush (after unplugging). Reduce other light sources in the area. Relocate the zapper to an optimal height (20-100 cm) and away from competing light. |
| Device makes popping sounds. | Normal operation when insects are zapped. | This is normal. The sound indicates insects are being eliminated. |
9. Specifications
- Brand: PALONE
- Model Number: LT-806
- Voltage: 4500V (Internal Grid)
- Power: 20W (Incandescent Lamps)
- UV Wavelength: 365NM
- Coverage Area: Up to 100 square feet
- Power Cord Length: 3.9 feet (PVC Wire)
- Material: High-quality ABS
- Waterproof Rating: IPX4
- Dimensions: 11.65 x 6.97 x 6.97 inches (Package Dimensions)
- Item Weight: 1.68 pounds
- Color: Black
10. Warranty and Support
For warranty information or technical support, please refer to the contact details provided on the product packaging or visit the official PALONE website. Keep your purchase receipt as proof of purchase.
