1. Introduction
Thank you for choosing the Beliani Modern Chenille Bed Frame. This manual provides comprehensive instructions for the safe and efficient assembly, operation, and maintenance of your new bed frame. Please read this manual thoroughly before beginning assembly and keep it for future reference.
This upholstered chenille bed frame is designed for a mattress measuring 180 x 200 cm. It features a high, generously padded headboard for comfortable support and light wooden angled legs made from rubberwood, providing sturdy support for your mattress. The fashionable channel tufting adds an elegant touch to any modern bedroom.
Image 1.1: The Beliani Modern Chenille Bed Frame, showcasing its light grey chenille upholstery and wooden legs.
2. Safety Information
- Always assemble the bed frame on a soft, clean surface to prevent damage to the product and your floor.
- Ensure all components are present and undamaged before assembly. Do not proceed with assembly if any parts are missing or damaged.
- Keep small parts and packaging materials away from children and pets to prevent choking hazards.
- Use only the provided hardware. Do not substitute with other screws or fasteners.
- Tighten all screws and bolts securely, but do not overtighten, as this may strip threads or crack components.
- Periodically check all connections to ensure they remain tight.
- Do not exceed the maximum weight capacity of 250 kg.
- This bed frame is designed for indoor use only.
3. Parts List
Before starting assembly, verify that all parts listed below are included in your package. If any parts are missing or damaged, please contact customer support.
- 1 x Bed Frame (Headboard, Footboard, Side Rails)
- 1 x Slatted Base (consisting of 16 rolling slats)
- 4 x Rubberwood Legs
- Assembly Hardware (screws, bolts, washers, Allen key)
Note: Mattress, bedding, and pillows are not included with the bed frame.
4. Setup and Assembly
Full assembly is required for this bed frame. It is recommended that two adults perform the assembly. Estimated assembly time is 20-40 minutes.
- Unpack Components: Carefully unpack all components from the packaging. Lay them out on a clean, soft surface to prevent scratches.
- Attach Legs: Securely attach the four rubberwood legs to the designated points on the bed frame. Ensure they are firmly tightened.
- Assemble Frame: Connect the headboard, footboard, and side rails using the provided hardware. Follow the specific instructions in the included assembly diagram for correct alignment and fastening.
- Install Slatted Base: Once the main frame is assembled, unroll and place the slatted base onto the support rails within the bed frame. Ensure the slats are evenly spaced and secured if there are attachment points. The shock-absorbing slatted base provides optimal mattress support.
- Final Check: Double-check all connections to ensure they are tight and secure. The bed frame should be stable and not wobble.
Image 4.1: Detailed dimensions of the bed frame, including headboard height, overall length, width, and sleeping surface.
Image 4.2: Close-up view of the sturdy rubberwood leg and the upholstered frame connection, highlighting the quality craftsmanship.
5. Operating Instructions
Once assembled, the Beliani Modern Chenille Bed Frame is ready for use.
- Mattress Placement: Carefully place your 180 x 200 cm mattress onto the slatted base. For optimal aesthetic and comfort, a mattress height of approximately 20 cm is recommended, as shown in product images.
- Weight Capacity: The bed frame has a maximum weight capacity of 250 kg (including mattress and occupants). Do not exceed this limit to ensure safety and product longevity.
- Headboard Use: The generously padded headboard is designed for comfortable leaning, ideal for reading or relaxing in bed.
Image 5.1: The bed frame integrated into a bedroom, demonstrating its aesthetic appeal with bedding and pillows.
6. Maintenance and Care
Proper care will extend the life and maintain the appearance of your chenille bed frame.
- Cleaning Chenille Upholstery:
- Regularly vacuum the upholstery using a soft brush attachment to remove dust and debris.
- For spills, blot immediately with a clean, dry cloth. Do not rub, as this can spread the stain.
- For deeper cleaning, use a mild upholstery cleaner specifically designed for chenille or polyester fabrics. Test on an inconspicuous area first.
- Avoid using harsh chemicals, abrasive cleaners, or excessive moisture, as these can damage the fabric.
- Wood Components: Wipe wooden legs with a soft, damp cloth. Dry immediately. Avoid prolonged exposure to moisture.
- Structural Integrity: Periodically (e.g., every 6 months) check all bolts and screws to ensure they are still tight. Retighten if necessary to maintain stability.
- Sunlight Exposure: Avoid placing the bed frame in direct sunlight for extended periods, as this can cause fading of the fabric.
Image 6.1: A detailed view of the chenille fabric texture, showing its soft and durable weave.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Bed frame wobbles or feels unstable. | Loose bolts or screws. Uneven floor. | Check and tighten all assembly bolts and screws. If the floor is uneven, use furniture pads or shims under the legs to level the frame. |
| Squeaking noises. | Loose connections. Slats rubbing against frame. | Ensure all bolts are tight. Apply a small amount of silicone spray or wax to points where slats meet the frame if rubbing occurs. |
| Slats seem to shift or fall out. | Slats not properly seated or secured. | Ensure each slat is correctly positioned and fully seated in its designated slot or support. Verify the slatted base is installed correctly. |
| Fabric appears discolored or stained. | Dirt accumulation or spills. Prolonged direct sunlight exposure. | Refer to the "Maintenance and Care" section for cleaning instructions. Reposition the bed to avoid direct sunlight if fading is observed. |
8. Specifications
| Feature | Detail |
|---|---|
| Brand | Beliani |
| Model Numbers | 615252, 615257 |
| Product Type | Double Bed Frame |
| Style | Scandinavian |
| Color | Light Grey |
| Main Material | Chenille (100% Polyester) |
| Leg Material | Rubberwood |
| Overall Width | 195 cm |
| Overall Length | 215 cm |
| Overall Height | 105 cm |
| Headrest Dimensions | 195 x 88 cm |
| Sleeping Surface | 180 x 200 cm |
| Item Weight | 68 kg |
| Weight Capacity | 250 kg |
| Assembly Required | Yes (Full assembly, 20-40 min) |
9. Warranty and Support
Beliani products are manufactured to high-quality standards. For information regarding warranty coverage, returns, or technical support, please refer to the warranty card included with your purchase or visit the official Beliani website.
If you encounter any issues not covered in this manual or require further assistance, please contact Beliani customer service directly. When contacting support, please have your model number (615257) and purchase details ready.
Beliani Official Website: www.beliani.nl
