Introduction
Thank you for purchasing the Karlsson Audaz LED Digital Display Alarm Clock. This manual provides detailed instructions for setting up, operating, and maintaining your new alarm clock. Please read this manual thoroughly before use to ensure proper functionality and longevity of the product.
The Karlsson Audaz alarm clock features a modern design with a clear digital time display and an acrylic cover, making it a stylish and functional addition to any space.
Product Overview
Familiarize yourself with the components of your Karlsson Audaz alarm clock.
Figure 1: Front view of the alarm clock, highlighting the LED display.
Figure 2: Side view, showing the compact design and brand logo.
Figure 3: Top view, illustrating the control buttons for operation.
Figure 4: Rear view, indicating the power input and battery compartment.
Setup
Follow these steps to set up your alarm clock for the first time.
- Power Connection: Connect the provided DC 5V power adapter to the power input port on the back of the alarm clock (refer to Figure 4). Plug the adapter into a standard wall outlet.
- Battery Installation (Optional Backup): For time and alarm settings backup during power outages, open the battery compartment on the back of the clock (refer to Figure 4) and insert 3 AAA batteries (not included), observing the correct polarity (+/-).
- Initial Display: Once powered, the LED display will light up.
Operating Instructions
Setting the Time
- Press and hold the MODE button for 3 seconds to enter time setting mode. The hour digits will start flashing.
- Use the UP and DOWN buttons to adjust the hour.
- Press the MODE button again to switch to minute setting. The minute digits will flash.
- Use the UP and DOWN buttons to adjust the minutes.
- Press the MODE button once more to confirm and exit time setting mode.
Setting the Alarm
- Press and hold the ALARM button for 3 seconds to enter alarm setting mode. The alarm hour digits will start flashing.
- Use the UP and DOWN buttons to adjust the alarm hour.
- Press the ALARM button again to switch to alarm minute setting. The alarm minute digits will flash.
- Use the UP and DOWN buttons to adjust the alarm minutes.
- Press the ALARM button once more to confirm and exit alarm setting mode.
Activating/Deactivating Alarm
- Press the ALARM button briefly to toggle the alarm ON or OFF. An alarm icon will appear on the display when the alarm is active.
Snooze Function and Display Brightness
- When the alarm sounds, press the SNOOZE/LIGHT button to activate the snooze function. The alarm will sound again after approximately 5 minutes.
- To stop the alarm completely, press any other button (MODE, ALARM, UP, DOWN).
- Press the SNOOZE/LIGHT button briefly during normal operation to adjust the display brightness. There are typically multiple brightness levels.
Maintenance
Proper care will ensure the longevity of your alarm clock.
- Cleaning: Wipe the clock with a soft, dry cloth. Do not use abrasive cleaners or solvents, as they may damage the acrylic cover or casing.
- Placement: Avoid placing the clock in direct sunlight, near heat sources, or in areas with high humidity.
- Battery Replacement: If using backup batteries, replace them annually or when the display shows signs of dimming during a power outage.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Display is blank or dim. | No power or loose connection. Incorrect brightness setting. | Ensure the power adapter is securely plugged into the clock and the wall outlet. Press the SNOOZE/LIGHT button to adjust brightness. |
| Alarm does not sound. | Alarm is not activated. Alarm volume is too low (if adjustable, though not specified for this model). | Press the ALARM button briefly to ensure the alarm icon is displayed. Re-check alarm time settings. |
| Time is incorrect. | Time was not set correctly. Power interruption. | Follow the "Setting the Time" instructions to reset the time. Ensure backup batteries are installed and functional. |
Specifications
- Model: KA6040
- Brand: Karlsson
- Color: Misty Blue
- Material: ABS
- Display: LED Digital
- Dimensions: 6.5 cm (Length) x 3.81 cm (Width) x 2.8 cm (Height)
- Weight: 200 grams
- Power Input: DC 5V
- Backup Battery: 3 x AAA (not included)
Warranty Information
This Karlsson Audaz LED Digital Display Alarm Clock is covered by a standard manufacturer's warranty. Please refer to the warranty card included in your product packaging for specific terms and conditions, including warranty period and coverage details. Keep your purchase receipt as proof of purchase for warranty claims.
Customer Support
If you encounter any issues or have questions regarding your Karlsson Audaz alarm clock that are not addressed in this manual, please contact Karlsson customer support. Contact information can typically be found on the product packaging or the official Karlsson website.
For further assistance, please visit: www.karlssonclocks.com
