1. Introduction
Thank you for choosing the Easyair Inflatable Bounce House Water Slide Combo. This manual provides essential information for the safe and proper setup, operation, maintenance, and troubleshooting of your inflatable water park. Please read all instructions carefully before use to ensure a fun and secure experience for all users.
Figure 1: Easyair Inflatable Bounce House Water Slide Combo in use.
2. Safety Information
WARNING: Failure to follow these instructions may result in serious injury or death.
- Adult Supervision Required: Always ensure constant and competent adult supervision when the inflatable is in use.
- Age and Weight Limits: This product is recommended for children aged 3 years and up. The maximum weight capacity is 400 pounds (180 kg) total, with an individual weight limit of 100 pounds (45 kg) per child. A maximum of 4 children are allowed at one time.
- Choking Hazard: Small parts are included. Keep away from young children.
- Clear Area: Ensure the inflatable is set up on a soft, level surface, free from sharp objects, debris, or obstructions. Maintain a safe perimeter around the inflatable.
- Blower Operation: The blower must remain on and continuously inflate the castle during all use. Air loss through seams is normal and necessary to prevent over-inflation.
- Water Use: If using with water, ensure proper drainage and prevent water accumulation around the blower.
- Weather Conditions: Do not use in strong winds, heavy rain, or lightning.
- No Diving or Rough Play: Prohibit diving, flipping, or roughhousing to prevent injuries.
- Secure Anchoring: Always anchor the inflatable securely to the ground using the provided stakes.
3. What's Included
Carefully unpack the box and ensure all items listed below are present:
- 1 x Water Slide Bounce House
- 1 x Blower
- 1 x Inflatable Basketball
- 1 x Bulls Eye (for target game)
- 1 x Hose Assembly Kit
- 1 x Carrying Bag
- 8 x Water Park Stakes
- 2 x Blower Stakes
- 4 x Repair Patches
Figure 2: Complete Accessories.
4. Setup Instructions
Follow these steps for quick and easy setup:
- Choose a Location: Select a flat, clear outdoor area, such as a lawn, free from sharp objects, rocks, or debris. Ensure adequate space around the inflatable for safety.
- Unroll the Inflatable: Lay the water park flat on the chosen surface, spreading it out completely.
- Connect the Blower: Attach the air intake tube of the inflatable to the outlet of the blower. Securely tie off the short air cylinder on the inflatable.
- Position and Secure Blower: Place the blower on a stable, dry surface. Use the two blower stakes to secure the blower to the ground.
- Inflate: Plug the blower into a grounded electrical outlet. The inflatable will begin to inflate within minutes.
- Anchor the Inflatable: Once fully inflated, use the provided water park stakes to secure the inflatable to the ground through the anchor points located around its base.
- Connect Water Hose (for wet use): If using as a water slide, connect your garden hose to the hose assembly kit and then attach it to the designated water spray nozzles on the inflatable. Turn on the water supply slowly.
Figure 3: Easy Inflation & Setup Steps.
5. Operating Instructions
Ensure the blower is continuously running throughout the entire play session. The inflatable offers multiple play areas:
- Double Water Slides: Children can slide down the two parallel slides into the splash pool. Ensure children slide feet first.
- Climbing Wall: Use the climbing wall to access the top of the slides. Always climb one at a time.
- Basketball Hoop: Practice shooting hoops with the included inflatable basketball.
- Splash Pool: The large splash pool provides a safe landing area and space for water play.
- Target Game: Engage in the airsoft shooting target game for added fun.
- Bouncing Area: The soft bouncing mat allows for safe jumping.
Figure 4: Various play activities on the inflatable.
Figure 5: Wet outdoor and dry indoor play options.
6. Maintenance and Storage
6.1. Cleaning
After each use, especially with water, clean the inflatable thoroughly. Use mild soap and water to wipe down all surfaces. Rinse thoroughly and ensure no soap residue remains.
6.2. Drying
It is crucial to completely dry the inflatable before storage to prevent mold and mildew. Leave the blower running for an extended period after water use to air dry the interior. You can also wipe down exterior surfaces with a dry cloth.
6.3. Storage
Once completely dry, deflate the inflatable. Fold it neatly and place it in the provided carrying bag. Store in a cool, dry place, away from direct sunlight and extreme temperatures. Keep the blower in a dry, protected area.
6.4. Repair Patches
In case of small punctures, use the included repair patches. Clean the damaged area, apply the patch firmly, and allow sufficient time for it to adhere before re-inflating.
7. Troubleshooting
| Issue | Possible Cause / Solution |
|---|---|
| Inflatable does not fully inflate or seems soft. | Ensure the blower is continuously running. Check for any open zippers or large tears. Air loss through seams is normal and necessary for proper inflation balance. |
| Water accumulates in certain areas or leaks from seams. | It is normal for bubbles to appear on pool surfaces and other wet areas, and for air and water to seep in at the seams. This is part of the design and testing process. |
| Blower stops working. | Check the power connection and ensure the outlet is functioning. Verify there are no obstructions in the blower's intake or exhaust. |
| Product appears to have small holes. | Air loss through seams is normal, as the product is inflated by constant airflow and this leakage is required to stop the product from becoming over-inflated. Use repair patches for any actual punctures. |
8. Product Specifications
| Feature | Detail |
|---|---|
| Product Dimensions | 165 x 174 x 90 inches (13.7 Ft x 14.4 Ft x 7.5 Ft) |
| Item Weight | 71.5 pounds |
| Material | Heavy-duty PVC coated polyester fabric (420D and 840D Oxford fabric) |
| Maximum Weight Capacity | 400 pounds (180 kg) |
| Individual Weight Capacity | 100 pounds (45 kg) per child |
| Maximum Number of Children | 4 |
| Recommended Age | 3 years and up |
| Blower Power | ETL-certified 520 W |
| Model Number | FAT-SL2489 |
Figure 6: Product Dimensions.
9. Warranty and Customer Support
For warranty information, product support, or any questions not covered in this manual, please contact Easyair customer service. Refer to your purchase documentation or the Easyair official website for contact details.
Thank you for choosing Easyair!
