1. Introduction
Thank you for choosing the PoKat 23" Orange Ceramic Table Lamps. This manual provides essential information for the safe and efficient assembly, operation, and maintenance of your new lamps. Please read these instructions thoroughly before use and retain them for future reference.
2. Safety Information
- Fragile Material: The lamp bases are made of ceramic and are fragile. Handle with care to prevent breakage.
- Electrical Safety: Ensure the power supply is disconnected before assembly, bulb replacement, or cleaning.
- Bulb Compatibility: Use only E26 base bulbs, with a maximum wattage of 60 watts. Do not exceed the recommended wattage to avoid overheating.
- Indoor Use Only: These lamps are designed for indoor use. Do not expose to moisture or use in wet environments.
- Stable Placement: Place the lamps on a flat, stable surface to prevent tipping.
- Cord Management: Ensure the power cord is not pinched, tangled, or placed where it can be tripped over.
3. Package Contents
Verify that all components are present before beginning assembly. If any parts are missing or damaged, please contact customer support.
- 2 x Ceramic Lamp Bases (Orange)
- 2 x Fabric Lampshades (White)
- 2 x Harp Assemblies
- 2 x Finials
- Instruction Manual
Figure 3.1: All components included in the package.
4. Setup and Assembly
The lampshade requires minor assembly. No tools are needed.
- Unpack Components: Carefully remove all parts from the packaging.
- Assemble Lampshade: The lampshade fabric is rolled. Gently unroll it and attach the two metal rings to the top and bottom edges using the built-in Velcro strips. Ensure the fabric is taut and evenly distributed.
- Attach Harp: Locate the harp (U-shaped metal frame) and squeeze its two arms together to fit it into the saddle on the lamp base. Release the arms to secure it.
- Install Bulb: Screw an E26 base bulb (not included, max 60W) into the lamp socket.
- Place Lampshade: Position the assembled lampshade onto the harp, ensuring the top ring rests on the harp's saddle.
- Secure Finial: Screw the finial onto the threaded rod at the top of the harp to secure the lampshade in place.
- Connect Power: Plug the lamp into a standard 110V electrical outlet.
Figure 4.1: An assembled lamp ready for use.
5. Operating Instructions
These lamps feature a simple rotary switch for operation.
- Turning On/Off: Rotate the switch located on the lamp socket clockwise to turn the lamp on. Rotate it again to turn the lamp off.
- Light Source: The lamp is compatible with LED light sources.
Figure 5.1: Compatible E26 bulb types.
6. Maintenance
- Cleaning: Disconnect the power before cleaning. Wipe the ceramic base with a soft, dry cloth. For the lampshade, use a lint roller or a soft brush to remove dust. Do not use liquid cleaners or abrasive materials.
- Bulb Replacement: Ensure the lamp is unplugged and the bulb has cooled before attempting to replace it. Unscrew the old bulb and screw in a new E26 base bulb (max 60W).
Figure 6.1: Detail of the ceramic lamp base texture.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Lamp does not turn on. | 1. Lamp is unplugged. 2. Bulb is loose or burnt out. 3. Power outlet is not functioning. | 1. Ensure the lamp is securely plugged into a working outlet. 2. Check if the bulb is screwed in tightly. Replace the bulb if necessary. 3. Test the outlet with another device. |
| Lampshade is wobbly. | Finial is not tightened or harp is not seated correctly. | Ensure the finial is screwed on tightly. Check that the harp is properly inserted into the saddle on the lamp base. |
| Lamp flickers. | Loose bulb or faulty bulb. | Tighten the bulb. If flickering persists, replace the bulb. |
8. Specifications
- Model Number: AMZ-T1102AC
- Dimensions (D x W x H): 9" x 9" x 23"
- Base Diameter: 5.25 Inches
- Shade Height: 9 Inches
- Item Weight: 8.59 Pounds (for the set)
- Material Type: Ceramic Lamp Base, Linen Lampshade
- Color: Orange (Base), White (Shade)
- Finish Type: Polished
- Bulb Base: E26
- Max Wattage: 60 watts
- Voltage: 110 Volts
- Switch Type: Rotary
- Indoor/Outdoor Usage: Indoor
- Number of Items: 2
Figure 8.1: PoKat 23" Orange Ceramic Table Lamps in a home setting.
9. Warranty and Support
PoKat Lighting is committed to providing high-quality products and excellent customer service.
- Warranty: We offer a 2-year protection plan on all PoKat ceramic lamps. This warranty covers manufacturing defects and ensures peace of mind with your purchase.
- Customer Support: Our professional service team is available 24/7 to assist you with any questions or concerns regarding your product. Please refer to your purchase documentation for contact information.