Empava Whirlpool Bathtub User Manual

Introduction

This user manual provides essential information for the safe and efficient operation, installation, and maintenance of your Empava 67-Inch Jetted Whirlpool Bathtub. Please read this manual thoroughly before installation and use, and retain it for future reference.

Safety Information

Always follow basic safety precautions to reduce the risk of fire, electric shock, or injury. This appliance is intended for household use only.

• Ensure proper grounding.
• Do not operate without water.
• Keep children supervised around the bathtub.
• Consult a qualified electrician and plumber for installation.
• Do not use abrasive cleaners.

Product Overview

The Empava 67-Inch Jetted Bathtub features advanced hydro and air massage systems, chromotherapy lighting, and a waterfall function for a comprehensive spa experience.

Figure 1: Empava 67-Inch Whirlpool Bathtub with blue chromotherapy lighting activated, showcasing the waterfall feature and overall design.

Figure 2: Top-down view of the Empava 67-Inch Whirlpool Bathtub, highlighting the control panel, water jets, air jets, and LED lights.

Key Features:

• Dual Hydro & Air Massage Therapy: 9 adjustable water jets and 8 gentle air jets for comprehensive massage.
• Calming Chromatherapy & Waterfall Feature: 16-color LED lights and a 35-inch cascading waterfall.
• Smart Temperature Control: Inline heater maintains water temperature between 96.8°F-104°F (36°C-40°C). Note: Heater preserves temperature but does not heat cold water.
• Ergonomic Safety Design: 125° angled tub with slip-resistant flooring and streamlined drain.
• Integrated Components: Includes faucet, showerhead, drainpipe, and pillow.

Setup and Installation

Pre-Installation Checklist:

• Verify all components are present and undamaged.
• Ensure the installation area can support the weight of the filled bathtub and occupant(s).
• Confirm availability of two dedicated 15A GFCI circuits (120V) for electrical connection.
• Prepare plumbing for hot and cold water supply lines and drainage.

Dimensions and Clearance:

The bathtub dimensions are approximately 30"L x 67"W x 25"H. Ensure adequate space for installation and maintenance access.

Figure 3: Detailed dimensions of the 67-inch bathtub and comparison with average male and female heights for scale.

Figure 4: Ergonomic seating diagrams illustrating comfortable bathing positions for different user heights within the bathtub.

Electrical Requirements:

The bathtub requires two dedicated 15A GFCI circuits (120V). All electrical connections must comply with local codes and be performed by a licensed electrician.

Plumbing Connections:

Connect hot and cold water supply lines to the designated inlets. Install the drainpipe according to local plumbing codes. Ensure all connections are watertight.

Operating Instructions

Filling the Bathtub:

Ensure the drain is closed. Fill the bathtub with water to a level above the jets but below the overflow. For optimal temperature maintenance, start with hot water.

Control Panel Operation:

The LED control panel allows you to manage various functions.

Figure 5: Diagram illustrating the various controls and features on the bathtub's rim, including the control panel, faucet, and massage controls.

• Power Button: Turns the system on/off.
• Hydro Massage: Activates the water jets. Adjust intensity if applicable.
• Air Bubble: Activates the air jets for a gentle bubble massage.
• Mood Light (Chromotherapy): Cycles through 16 LED colors.
• Waterfall Control: Activates or deactivates the waterfall feature.
• Temperature Control: Adjusts the inline heater to maintain desired water temperature.

Using the Waterfall Feature:

Figure 6: A close-up view of the integrated waterfall feature, showing water cascading into the tub.

The 35-inch waterfall can be activated via the control panel. Ensure sufficient water level for proper operation.

Temperature Maintenance:

Figure 7: A graph demonstrating how the inline heater maintains the water temperature within the desired range, preventing significant heat loss over time.

The inline heater is designed to maintain the water temperature within the range of 96.8°F (36°C) to 104°F (40°C). It does not heat cold water; always fill the tub with water at your desired initial temperature.

Maintenance

Cleaning the Bathtub:

• Use a soft cloth and mild, non-abrasive cleaner for the acrylic surface.
• Avoid harsh chemicals, abrasive pads, or solvents.
• Rinse thoroughly after cleaning.

Jet and Plumbing System Cleaning:

Periodically run the jets with a bathtub cleaner specifically designed for jetted tubs to prevent buildup in the plumbing system. Follow the cleaner's instructions.

Draining the Bathtub:

To drain the tub, rotate the overflow cover to activate the drainage mechanism. Ensure the tub is completely drained after each use.

Troubleshooting

Specifications

Warranty and Support

The Empava Whirlpool Bathtub is backed by a 3-year limited warranty covering jets, leaks, and components. For warranty claims or technical support, please contact Empava customer service.

For further assistance, visit the official Empava Store: Empava Store on Amazon.