1. Important Safety Information
Read all instructions carefully before assembly and use. Keep this manual for future reference.
- Weight Capacity: Do not exceed the recommended weight limits for each bunk.
- Guardrails: Ensure all guardrails are securely in place on the upper bunk.
- Mattress Size: Use only mattresses of the specified size to prevent gaps.
- Assembly: Two adults are recommended for assembly. Do not use power tools unless specified.
- Ventilation: Ensure adequate ventilation around the bed, especially when using LED lights.
- Children: Children under 6 years old should not use the upper bunk.
- Falling Hazard: Do not allow horseplay on or under the bed. Always use the ladder for access to the upper bunk.
- Maintenance: Regularly check all connections and tighten hardware as needed.
2. Package Contents
Verify all components are present before beginning assembly. Refer to the included parts list for detailed identification.
- Metal Frame Components (Numbered)
- Hardware Pack (Screws, bolts, washers, Allen wrench)
- Desk Surface
- Bookshelf Panels
- LED Light Strip
- USB Charging Ports Unit
- Instruction Manual
3. Setup and Assembly Instructions
Follow these steps carefully for proper assembly. Two adults are recommended for this process.
- Unpack and Identify: Lay out all components on a clean, soft surface (e.g., carpet) to prevent scratches. Match each part to the numbered diagram in the separate assembly guide.
- Assemble Base Frame: Begin by connecting the main support beams for the lower and upper bunks. Ensure all connections are finger-tightened initially.
- Install Ladder and Guardrails: Securely attach the ladder and all guardrails to the upper bunk frame. Double-check that these are firmly fastened for safety.
- Attach Desk and Bookshelves: Mount the desk surface and bookshelf panels to the designated frame sections. Ensure they are level and stable.
- Integrate LED Lights and USB Ports: Carefully install the LED light strip and USB charging unit into their respective slots on the desk or frame. Connect power as instructed.
- Final Tightening: Once all components are in place, systematically tighten all screws and bolts using the provided tools. Do not overtighten.
- Safety Check: Before use, gently shake the assembled bed to ensure stability. Re-tighten any loose connections.
Image: An exploded view diagram showing the various components of the Polibi Queen Over Twin XL Metal Bunk Bed, illustrating how they fit together during assembly.
Image: A fully assembled Polibi Queen Over Twin XL Metal Bunk Bed with the lower bed configured as an L-shaped sofa, featuring a desk with shelves and a laptop.
4. Operating Instructions
4.1 Convertible Design (Bed to Sofa)
The lower bed features a convertible design, allowing it to function as a twin XL bed, an L-shaped sofa, or a folded sofa for space-saving.
- To Convert to L-shaped Sofa: Gently pull the lower bed frame outwards from the main structure. The bed base will pivot to form an L-shape with the main frame. Ensure it locks securely into position.
- To Convert to Sofa: Fold the lower bed base inward towards the main frame. The mattress platform will fold, creating a sofa seating area.
- To Convert to Twin XL Bed: Extend the lower bed frame fully outwards until it forms a flat sleeping surface. Ensure all support legs are engaged.
Video: Demonstration of the Polibi Bunk Bed converting from a bed configuration to an L-shaped sofa and then to a compact sofa, highlighting its versatile design.
4.2 LED Lighting and USB Ports
The integrated desk features LED lighting and USB charging ports for convenience.
- LED Lights: Connect the LED light strip to a power source. Use the inline switch or remote (if included) to turn the lights on/off and adjust brightness/color (if applicable).
- USB Ports: Plug the USB charging unit into a standard wall outlet. Connect your devices to the USB ports for charging.
Image: A close-up view of the integrated USB charging ports and standard power outlets located on the desk surface of the Polibi Bunk Bed, ready for device connection.
5. Maintenance
- Cleaning: Wipe metal surfaces with a soft, damp cloth. Avoid abrasive cleaners or harsh chemicals.
- Hardware Check: Periodically inspect all bolts, screws, and connections. Tighten any loose hardware to ensure structural integrity and safety.
- Mattress Care: Follow the manufacturer's instructions for mattress care.
- Electrical Components: Ensure LED lights and USB ports are free from dust and debris. Do not attempt to repair electrical components yourself.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Bed feels wobbly after assembly. | Loose hardware. | Re-check and tighten all bolts and screws. Ensure all parts are correctly aligned. |
| LED lights not working. | Not plugged in; faulty connection; damaged strip. | Ensure power adapter is securely plugged into an outlet and the light strip. Check for any visible damage to the strip or wiring. Contact support if issues persist. |
| USB ports not charging devices. | Power not connected; device incompatibility; faulty port. | Verify the USB unit is powered. Try a different USB cable or device. If still not working, contact support. |
| Lower bed conversion mechanism is stiff. | Friction; misalignment. | Ensure no obstructions. Apply a small amount of silicone lubricant to moving parts if necessary. Check for proper alignment of the pivoting sections. |
7. Specifications
- Model: Polibi Queen Over Twin XL Metal Bunk Bed with Desk & Sofa
- ASIN: B0F6V3JWHR
- Material: Heavy-gauge Steel Frame
- Color: Black
- Overall Dimensions (L x W x H): 83.5" x 63" x 68.7"
- Upper Bunk Mattress Compatibility: Queen
- Lower Bunk Mattress Compatibility: Twin XL
- Special Features: 3-in-1 Convertible Design (Bunk Bed, L-shaped Sofa, Sofa), Integrated Desk, Bookshelves, LED Lights, USB Charging Ports, Safety Guardrails.
- Certifications: CPC Certified (as per product description)
- Assembly Required: Yes (Tools included)
Image: A technical diagram illustrating the precise dimensions in inches of the Polibi Queen Over Twin XL Metal Bunk Bed, including height, length, and width of various sections.
8. Warranty and Support
For warranty information, product support, or to order replacement parts, please contact Polibi customer service.
- Customer Service: Refer to your purchase documentation or the Polibi official website for contact details.
- Online Resources: Visit the Polibi Store on Amazon for additional product information and support.
- Proof of Purchase: Keep your receipt or proof of purchase for warranty claims.
