Qidoe QD11-13(YJ-DS2034)

Qidoe 66W 12V USB Outlet Instruction Manual

Model: QD11-13(YJ-DS2034)

Product Overview

The Qidoe 66W 12V USB Outlet is a versatile car charger designed for vehicles, boats, marine applications, and RVs. It features four charging ports: two Power Delivery (PD) ports and two Quick Charge 3.0 (QC3.0) ports, allowing for simultaneous fast charging of multiple devices. An integrated voltmeter provides real-time voltage monitoring of your vehicle's battery.

Qidoe 66W 12V USB Outlet with voltmeter display and two fuses

Image: The Qidoe 66W 12V USB Outlet, showing its four USB ports (two PD, two QC3.0), a digital voltmeter display, and two included fuses.

Safety Information

Ensure the input voltage is within the specified range of 12V-24V DC.
Always connect the charger with the correct polarity (red wire to positive, black wire to negative).
Use the included 10A fuse to prevent overcurrent, overload, and short circuits.
Do not expose the device to extreme temperatures or direct sunlight for prolonged periods.
Keep out of reach of children.

Package Contents

1 x Qidoe 66W 12V USB Outlet
2 x 10A Fuses (one pre-installed, one spare)
1 x 1.5M/59.06inch Extended Cable with terminals
Mounting Nut

Qidoe 66W 12V USB Outlet in clear plastic packaging with included wires and fuses

Image: Contents of the Qidoe 66W 12V USB Outlet package, including the charger, wiring, and fuses.

Setup and Installation

Follow these steps for proper installation of your Qidoe 66W 12V USB Outlet:

Drill a Hole: Choose a suitable location for installation. Drill a hole with a 3cm (1.18 inch) diameter. Ensure there is enough space behind the mounting surface for the charger's body and wiring.
Insert and Secure: Insert the USB outlet into the drilled hole. Secure it tightly using the provided mounting nut on the backside.
Connect Wiring: Connect the red wire (positive) to your vehicle's positive battery terminal or an appropriate fused 12V/24V power source. Connect the black wire (negative) to the vehicle's negative battery terminal or a suitable ground point. Ensure the 10A fuse is properly installed in the red wire's fuse holder.
Verify Installation: Once wired, the voltmeter display should illuminate, indicating successful installation.

Diagram showing the three steps for installing the Qidoe 12V USB Outlet: drilling a 3cm hole, inserting and screwing the socket, and connecting positive and negative wires to the battery.

Image: Step-by-step visual guide for installing the USB outlet, including drilling, securing, and wiring connections.

Detailed diagram showing the dimensions of the Qidoe 12V USB Outlet and the length of the extended cable with fuses.

Image: Technical dimensions of the charger and details of the 1.5-meter extended cable with a 10A fuse.

Operating Instructions

Charging Devices

The Qidoe 66W 12V USB Outlet features two PD (Power Delivery) ports and two QC3.0 (Quick Charge 3.0) ports for efficient charging:

30W PD Port: Capable of charging compatible Android and iPhone devices up to 65% in approximately 30 minutes.
18W QC3.0 Port: Can charge devices from 0% to 60% in about 35 minutes.
Simultaneous Charging: All four ports can be used simultaneously, sharing a total power output of up to 66W without compromising charging speed for individual devices.

Comparison chart showing charging speeds for PD 30W, Fastcharger 18W, and QC3.1A+PD3.1A ports, highlighting quick charge capabilities.

Image: Visual representation of the fast charging capabilities of the PD 30W and QC3.0 ports.

An iPhone 14/15/16 connected to the Qidoe USB outlet, showing 80% charge in 35 minutes.

Image: An iPhone connected to the charger, demonstrating its fast charging for compatible devices.

Multiple devices (two smartphones) connected to the Qidoe 4-port USB car charger, illustrating its ability to charge four devices simultaneously.

Image: The charger in use, powering multiple devices at once.

Voltmeter Display

The built-in digital voltmeter provides real-time monitoring of your vehicle's battery voltage. This helps you keep track of your battery's health and prevent unexpected power issues.

Image: The voltmeter display showing the current battery voltage.

Two images side-by-side showing the Qidoe USB outlet with its voltmeter display on (12.5V) and off, illustrating the power status.

Image: The charger's power on and off states, indicated by the voltmeter display.

Maintenance

Cleaning: Use a dry, soft cloth to clean the surface of the charger. Do not use abrasive cleaners or solvents.
Connection Check: Periodically check the wiring connections to ensure they are secure and free from corrosion.
Fuse Replacement: If the charger stops working, check the 10A fuse. Replace it with a new 10A fuse if it is blown.
Water and Dust Resistance: The charger is designed to be water-proof and dust-proof, offering durability in various environments. However, avoid prolonged submersion or exposure to high-pressure water jets.

Image showing the Qidoe USB outlet being splashed with water, with icons indicating it is water-proof and dust-proof.

Image: The charger demonstrating its water and dust resistance features.

Troubleshooting

Problem	Possible Cause	Solution
Charger not powering on / No voltmeter display	Incorrect wiring, blown fuse, insufficient power supply.	Check wiring polarity. Replace the 10A fuse. Ensure battery voltage is within 12V-24V.
Slow charging or no charging	Incompatible cable, device not supporting fast charge, device fully charged, or multiple high-power devices connected.	Use a high-quality, compatible charging cable. Verify device supports PD/QC3.0. The chip stops charging automatically when fully charged.
Voltmeter displays abnormal voltage (e.g., 11.6V or 14.9V)	Vehicle battery voltage is too low or too high.	This indicates the actual battery voltage. If consistently too low, check your vehicle's battery. If too high, consult a vehicle technician. Normal range is typically 12V-14.5V.

Diagram showing different voltage readings on the Qidoe USB outlet: 11.6V (too low), 12.5V (normal), and 14.9V (too high).

Image: Examples of voltmeter readings and their interpretations.

Specifications

Model Number: QD11-13(YJ-DS2034)
Input Voltage: 12V-24V DC
Total USB Ports: 4 (2 x PD, 2 x QC3.0)
Total Wattage: 66W Max
PD Port Output: 30W Max
QC3.0 Port Output: 18W Max
Item Weight: 2.46 ounces
Product Dimensions: 5.3 x 1.3 x 3 inches
Special Feature: Fast Charging, Voltmeter Display, Water-proof, Dust-proof
Compatible Devices: Smartphones (iPhone 16/15/14/13/12/11/X, Samsung Galaxy S24/S23/S22/S21/S20/S10, Huawei, LG, HTC, ZTE), Tablets (iPad mini/Pro), Cameras, and other USB-powered devices.

Warranty and Support

This Qidoe product comes with a 60-day money-back guarantee and a 1-year free replacement warranty from the date of purchase. This warranty covers manufacturing defects and issues arising from normal use.

For any questions, technical support, or warranty claims, please contact the seller or manufacturer directly through your purchase platform. Please have your order number and product model readily available for faster service.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.