Zalman Raven

Download PDF
Contents

Zalman Raven ATX Mid-Tower Gaming PC Case Instruction Manual

Model: Raven

1. Introduction

Thank you for purchasing the Zalman Raven ATX Mid-Tower Gaming PC Case. This manual provides detailed instructions for the proper installation, operation, and maintenance of your new PC case. Please read this manual thoroughly before proceeding with installation to ensure optimal performance and safety.

Zalman Raven ATX Mid-Tower Gaming PC Case with RGB lighting

Image 1.1: The Zalman Raven ATX Mid-Tower Gaming PC Case, showcasing its design and RGB lighting strip.

2. Safety Information

  • Always disconnect the power supply from the wall outlet before installing or removing any components.
  • Wear an anti-static wrist strap to prevent electrostatic discharge (ESD) damage to sensitive components.
  • Handle tempered glass panels with care. Avoid impacts or sharp objects that could cause breakage.
  • Ensure proper ventilation around the PC case to prevent overheating.
  • Keep small parts and packaging materials away from children.

3. Package Contents

Verify that all components are present in the package:

  • Zalman Raven ATX Mid-Tower PC Case
  • Tempered Glass Side Panel (pre-installed)
  • 1 x 120mm Rear Fan (pre-installed)
  • Accessory Box (screws, cable ties, standoffs, user manual)

4. Setup and Installation

4.1. Preparing the Case

  1. Place the case on a flat, stable surface.
  2. Remove the tempered glass side panel by unscrewing the four thumb screws. Carefully set the panel aside on a soft, non-abrasive surface.
  3. Remove the rear metal side panel by unscrewing the two thumb screws and sliding it backward.

4.2. Motherboard Installation

The Zalman Raven case supports ATX, Micro-ATX (mATX), and Mini-ITX motherboards.

Diagram showing motherboard support for Mini-ITX, mATX, and ATX sizes within the Zalman Raven case

Image 4.2: Internal view illustrating the compatible motherboard sizes (Mini-ITX, mATX, ATX) within the case chassis.

  1. Install the I/O shield into the rear opening of the case.
  2. Align your motherboard with the pre-installed standoffs. If your motherboard is Micro-ATX or Mini-ITX, ensure additional standoffs are installed in the correct positions as indicated by your motherboard manual.
  3. Secure the motherboard with the provided screws.

4.3. Component Clearance and Installation

Ensure your components fit within the specified dimensions:

Diagram showing maximum component dimensions for GPU, CPU cooler, PSU, and SSD/HDD locations

Image 4.3: Component clearance diagram, detailing maximum lengths for VGA cards (295mm), CPU coolers (150mm), and PSU (140mm), along with SSD/HDD mounting points.

  • CPU Cooler: Maximum height of 150mm.
  • Graphics Card (VGA): Maximum length of 295mm.
  • Power Supply Unit (PSU): Maximum length of 140mm. Install the PSU in the bottom rear compartment.
  • Storage Drives: Supports 1 x 3.5" HDD or 2.5" SSD (combo bay) and 4 x 2.5" SSDs. Mount drives in the designated locations.

4.4. Fan and Radiator Support

The case includes one pre-installed 120mm rear fan. Additional cooling options are available:

  • Front: Supports 2 x 120mm fans or 1 x 240mm radiator.
  • Rear: Supports 1 x 120mm fan or 1 x 120mm radiator. (120mm fan pre-installed)

4.5. Cable Management

Utilize the cable routing cutouts and tie-down points behind the motherboard tray to manage cables. This improves airflow and aesthetics.

Internal view of a PC build inside the Zalman Raven case, showing component placement and cable routing

Image 4.5: An assembled PC inside the Raven case, demonstrating component layout and potential for cable management.

5. Operating Instructions

5.1. Front I/O Panel

The front I/O panel provides convenient access to essential ports and controls:

Close-up of the front I/O panel showing Power button, LED color change button, USB 2.0 ports, Stereo/Mic jacks, and USB 3.0 port

Image 5.1: Detailed view of the front I/O panel, highlighting the power button, LED control, USB 2.0, audio jacks, and USB 3.0 ports.

  • Power Button: Press to power on or off the system.
  • LED Color Change Button: Cycles through various RGB lighting modes and colors for the front strip.
  • USB 2.0 Ports: For connecting USB 2.0 devices.
  • Stereo / Mic Jacks: For connecting headphones and microphones.
  • USB 3.0 Port: For connecting high-speed USB 3.0 devices.

5.2. RGB Lighting Control

The integrated RGB lighting strip on the front panel can be controlled via the dedicated button on the I/O panel. Press the button to cycle through different lighting effects and static colors.

Image showing the RGB lighting strip on the front panel with various color options and rainbow mode

Image 5.2: The front RGB lighting strip displaying various color options and a rainbow effect, controlled by the I/O panel button.

6. Maintenance

  • Cleaning: Use a soft, dry cloth to wipe down the exterior of the case. For the tempered glass panel, use a glass cleaner and a microfiber cloth. Avoid abrasive cleaners.
  • Dust Filters: Regularly check and clean any dust filters (if present) to maintain optimal airflow and cooling performance.
  • Internal Cleaning: Periodically open the case and use compressed air to remove dust buildup from components and fans. Ensure the system is powered off and unplugged before cleaning internally.

7. Troubleshooting

ProblemPossible CauseSolution
PC does not power on.Power cable disconnected, PSU switch off, front panel power button not connected correctly.Check all power connections. Ensure PSU switch is on. Verify front panel connectors are correctly attached to the motherboard.
RGB lighting not working.RGB cable disconnected, incorrect mode selected.Check RGB cable connection to the motherboard or controller. Press the LED color change button on the I/O panel to cycle modes.
Poor airflow/high temperatures.Dust buildup, insufficient fans, improper fan orientation.Clean dust filters and internal components. Consider adding more fans or optimizing fan direction for better airflow.

8. Specifications

FeatureDetail
Model NameRaven
Case TypeMid Tower
Motherboard CompatibilityATX, Micro-ATX, Mini-ITX
Dimensions (L x W x H)15.63 x 7.76 x 16.65 inches (397 x 197 x 423 mm)
MaterialAlloy Steel, Metal, Plastic, Tempered Glass
GPU ClearanceMax 295mm
CPU Cooler HeightMax 150mm
PSU LengthMax 140mm
Drive Bays1 x 3.5"/2.5" Combo, 4 x 2.5" SSD
Fan Support (Front)2 x 120mm
Fan Support (Rear)1 x 120mm (Pre-installed)
Radiator Support (Front)1 x 240mm
Radiator Support (Rear)1 x 120mm
Front I/OPower, LED Control, 2 x USB 2.0, 1 x USB 3.0, Audio (Mic/Headphone)
Weight7.05 pounds

9. Warranty and Support

For warranty information and technical support, please refer to the official Zalman website or contact their customer service department. Keep your proof of purchase for warranty claims.

Official Zalman Website: www.zalman.com

© 2025 Zalman. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.